Search results for "Anode"
showing 10 items of 317 documents
Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications
2021
Abstract In this work, the galvanic deposition method is used to deposit coatings of brushite/hydroxyapatite/polyvinyl acetate on 304 stainless steel. Coatings are obtained at different temperatures and with different sacrificial anodes, consisting of a mixture of brushite and hydroxyapatite. Samples are aged in a simulated body fluid (SBF), where a complete conversion of brushite into hydroxyapatite with a simultaneous change in morphology and wettability occurred. The corrosion tests show that, compared with bare 304, the coating shifts Ecorr to anodic values and reduces icorr Ecorr, and icorr has different values at different aging times due to chemical interactions at the solid/liquid i…
Electrochemical oxidation of organics at metal oxide electrodes: The incineration of oxalic acid at IrO2-Ta2O5 (DSA-O2) anode
2008
Abstract The electrochemical incineration of oxalic acid (OA) at Ti/IrO2–Ta2O5 (DSA-O2) anode was investigated to find the influence of the operative parameters on the performances of the process. Polarization curves and chronoamperometric measurements indicate the probable occurrence of a direct electrochemical oxidation of OA at the surface of the DSA anode. In incineration electrolyses, the performances of the process in terms of OA conversion and current efficiency dramatically depend on the adopted operative conditions. Interestingly, very high OA removal and current efficiency were obtained when the process was performed at relatively high temperatures (50 °C) or in the presence of Na…
Protective mechanisms occurring on zinc coated steel cut-edges in immersion conditions
2011
Abstract Electrochemical processes occurring on the cut-edge of a galvanized steel immersed in NaCl solutions were studied using numerical simulations, and in situ current and pH profiles measured over the cut-edge. These results clearly demonstrate that only the steel surface remote from the zinc coating is cathodically active, oxygen reduction being strongly inhibited in the vicinity of zinc. This trend was confirmed by local polarization curves recorded on these distinct areas. Ex-situ AES and SEM analysis and cathodic polarization curves in solutions containing Zn 2+ ions led to conclude that this cathodic inhibition was related to the fast nucleation of a dense Zn(OH) 2 film on the ste…
Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling
2008
Local cathodic inhibition has been observed on the cut-edge of galvanized steel immersed in 0.03 M NaCl solution using the scanning vibrating electrode technique. The current distribution results indicate that cathodic inhibition occurs in a limited spatial zone located between the cathodic sites on the steel and the anodic sites on the exposed zinc surface. The experimental current distributions are compared with the results of numerical simulations that show the specific diagnostic features for the detection of cathodic inhibition from scanning vibrating electrode technique (SVET) data so as to distinguish the zero current regions from experimental artifacts due to the lateral resolution …
White hybrid organic-inorganic light-emitting diode using ZnO as the air-stable cathode
2009
An efficient white light emitting hybrid organic−inorganic device utilizing air-stable metal oxides as anode and cathode and a polyfluorene mixed with a phosphorescent iridium complex as the emitting material is presented.
Mechanical properties and corrosion behaviour after scratch and tribological tests of electrodeposited Co-Mo/TiO2 nano-composite coatings
2019
International audience; The micro-mechanical (Young’s modulus and hardness) and tribological properties, as well as the scratch resistance of Co-Mo/TiO2 nano-composite coatings were investigated. The coating was found to be harder and stiffer than the substrate (pure cobalt). Low residual stresses were also derived from Stoney’s equation (type I stress). The corrosion behaviour after tribological and scratch tests was studied in Ringer’s solution. Dry sliding of the coating against an alumina ball at the load of 1 N or 2 N over the same distance had nearly no influence onthe anodic branch of the polarisation curves. By contrast, the current density in the cathodic branch (oxygen reduction r…
Exploring High-Energy Li-I(r)on Batteries and Capacitors with Conversion-Type Fe3O4-rGO as the Negative Electrode
2017
We report a microwave-assisted solvothermal process for the preparation of magnetite (Fe3O4, ca. 5 nm)-anchored reduced graphene oxide (rGO). It has been examined as a prospective conversion-type negative electrode for multiple energy storage applications, such as Li-ion batteries (LIBs) and Li-ion capacitors (LICs). A LiFePO4/Fe3O4-rGO cell is constructed and capable of delivering an energy density of approximately 139 Wh kg−1 with a notable cyclability (ca. 76 %) after 500 cycles. Prior to the fabrication of a LIB, the Fe3O4-rGO is electrochemically pretreated to eliminate the irreversible capacity loss. In addition to the LIB, a high-energy LIC is also fabricated by using the pre-lithiat…
Electrophoretically deposited α-Fe2O3 and TiO2 composite anchored on rGO with excellent cycle performance as anode for lithium ion batteries
2018
Abstract Two nanostructured oxides, α-Fe2O3 and TiO2 with a particle diameters 50 nm and 21 nm, were mixed with graphene oxide (GO). Composite thin films on a stainless steel substrate were obtained by electrophoretic deposition (EPD) procedure from water suspensions: α-Fe2O3/GO, TiO2/GO and α-Fe2O3/TiO2/GO. Subsequently reduction of as-prepared thin films was performed. Thicknesses of acquired films were evaluated in the range of 2–6 μm. Structure and morphology were investigated as well as electrochemical properties of all samples were studied. The results revealed that α-Fe2O3/TiO2/rGO (in this article denoted as FTGO) exhibited the specific discharge capacity of 790 mAh·g−1 after 150 cy…
Facile hybridization of Ni@Fe2O3 superparticles with functionalized reduced graphene oxide and its application as anode material in lithium-ion batte…
2015
Abstract In our present work we developed a novel graphene wrapping approach of Ni@Fe2O3 superparticles, which can be extended as a concept approach for other nanomaterials as well. It uses sulfonated reduced graphene oxide, but avoids thermal treatments and use of toxic agents like hydrazine for its reduction. The modification of graphene oxide is achieved by the introduction of sulfate groups accompanied with reduction and elimination reactions, due to the treatment with oleum. The successful wrapping of nanoparticles is proven by energy dispersive X-ray spectroscopy, high-resolution transmission electron microscopy and Raman spectroscopy. The developed composite material shows strongly i…
Aqueous synthesis of Z-scheme photocatalyst powders and thin-film photoanodes from earth abundant elements
2018
Riga Technical University supported the preparation of this manuscript from the Scientific Research Project Competition for Young Researchers No. ZP 2017/8