Search results for "Aperture"
showing 10 items of 182 documents
On the optimum form of an aperture for a confinement of the optically excited electric near field.
2008
Summary A triangular nanoaperture in an aluminium film was used previously as a probe in a scanning near-field optical microscope to image single fluorescent molecules with an optical resolution down to 30 nm. The high-resolution capability of the triangular aperture probe is because of a highly confined spot of the electric near field which emerges at an edge of the aperture, when the incident light is polarized perpendicular to this edge. Previous numerical calculations of the near-field distribution of a triangular aperture in a planar metal film using the field susceptibility technique yielded a nearly quantitative agreement with the experimental results. Using the same numerical techni…
Computational imaging with a balanced detector
2016
Single-pixel cameras allow to obtain images in a wide range of challenging scenarios, including broad regions of the electromagnetic spectrum and through scattering media. However, there still exist several drawbacks that single-pixel architectures must address, such as acquisition speed and imaging in the presence of ambient light. In this work we introduce balanced detection in combination with simultaneous complementary illumination in a single-pixel camera. This approach enables to acquire information even when the power of the parasite signal is higher than the signal itself. Furthermore, this novel detection scheme increases both the frame rate and the signal-to-noise ratio of the sys…
3D integral imaging display by smart pseudoscopic-to-orthoscopic conversion (SPOC).
2010
Previously, we reported a digital technique for formation of real, non-distorted, orthoscopic integral images by direct pickup. However the technique was constrained to the case of symmetric image capture and display systems. Here, we report a more general algorithm which allows the pseudoscopic to orthoscopic transformation with full control over the display parameters so that one can generate a set of synthetic elemental images that suits the characteristics of the Integral-Imaging monitor and permits control over the depth and size of the reconstructed 3D scene.
Landslide Impacts on Agrigento’s Cathedral Imaged with Radar Interferometry
2013
ERS1/2 (1992–2000), ENVISAT (2002–2008) and RADARSAT1 (2003–2007) satellite data, processed with Persistent Scatterer Interferometry, are exploited to study the historic urban area of Agrigento, Italy, whose structural stability is threatened by retrogressive landslide processes. Up to 2–5mm/year of line-of-sight displacement are observed in 1992–2008 on the staircase and the left aisle of the Cathedral. Displacement acceleration to 13–15mm/year is measured in July 2006–May 2007, in the northern portion of the churchyard, in front of the left aisle. The areas moving at higher rates, located at the edge of the NW slope of Girgenti hill, correspond to those showing major structural damages. A…
Development of the International Severe Asthma Registry (ISAR): A Modified Delphi Study
2019
BACKGROUND: The lack of centralised data on severe asthma has resulted in a scarcity of information about the disease and its management. The development of a common data collection tool for the International Severe Asthma Registry (ISAR) will enable standardised data collection, subsequently enabling data interoperability.OBJECTIVES: To create a standardised list of variables for the first international registry for severe asthma via expert consensus.METHODS: A modified Delphi process was used to reach consensus on a minimum set of variables to capture in ISAR: the core variables. The Delphi panel brought together 27 international experts in the field of severe asthma research. The process…
2020
Abstract. Quantifying the hydraulic properties of single fractures is a fundamental requirement to understand fluid flow in fractured reservoirs. For an ideal planar fracture, the effective flow is proportional to the cube of the fracture aperture. In contrast, real fractures are rarely planar, and correcting the cubic law in terms of fracture roughness has therefore been a subject of numerous studies in the past. Several empirical relationships between hydraulic and mechanical aperture have been proposed based on statistical variations of the aperture field. However, often, they exhibit non-unique solutions, attributed to the geometrical variety of naturally occurring fractures. In this st…
Three-ring filters increase the effective NA up to 1.46 in optical sectioning fluorescence microscopy
2003
Single-photon fluorescence confocal microscopy techniques can be combined with the use of specific binary filters in order to increase their optical sectioning capability. We present a novel class of axially super-resolving binary pupil filters specially designed to reach this aim. These filters let us to obtain a relevant compression of the z-response together with the reduction of the photo-bleaching effect typically inherent to apodization techniques. The fact of joining both the three-ring filters we propose in the illumination path, and the confocal detection gives rise to an important effective increase of lenses of effective numerical aperture.
Multipass amplifiers with self-compensation of the thermal lens
2018
We present a novel architecture for a multi-pass amplifier based on a succession of optical Fourier transforms and short propagations that shows a superior stability for variations of the thermal lens compared to state-of-the-art 4f-based amplifiers. We found that the proposed multi-pass amplifier is robust to variations of the active medium dioptric power. The superiority of the proposed architecture is demonstrated by analyzing the variations of the size and divergence of the output beam in form of a Taylor expansion around the design value for variations of the thermal lens in the active medium. The dependence of the output beam divergence and size is investigated also for variations of …
Passive alignment stability and auto-alignment of multipass amplifiers based on Fourier transforms.
2019
The stability properties of Fourier-based multipass amplifier to misalignments (tilts) of its optical components has been investigated. For this purpose, a method to quantify the sensitivity to tilts based on the amplifier small signal gain has been elaborated and compared with measurements. To improve on the tilt stability by more than an order of magnitude a simple auto-alignment system has been proposed and tested. This study, combined with other investigations devoted to the stability of the output beam to variations of aperture and thermal lens effects of the active medium, qualifies the Fourier-based amplifier for the high-energy and the high-power sector.
Intentional weld defect process: From manufacturing by robotic welding machine to inspection using TFM phased array
2019
Specimens with intentionally embedded weld defects or flaws can be employed for training, development and research into procedures for mechanical property evaluation and structural integrity assessment. It is critical that the artificial defects are a realistic representation of the flaws produced by welding. Cylindrical holes, which are usually machined after welding, are not realistic enough for our purposes as it is known that they are easier to detect than the naturally occurring imperfections and cracks. Furthermore, it is usually impractical to machine a defect in a location similar to where the real weld defects are found. For example, electro-discharge machining can prod…