Search results for "BEAMS"
showing 10 items of 268 documents
Stress transfer mechanism investigation in hybrid steel trussed-concrete beams by push-out tests
2014
Abstract Results of push-out tests carried out on Hybrid Steel Trussed–Concrete Beams (HSTCBs) before and after the concrete casting are presented and interpreted. Firstly, in order to check the ability of weldings before casting, tensile tests were performed on specimens reproducing different types of welded joints. Simplified design formulae were used to predict their ultimate strength. Secondly, results obtained by push-out tests on specimen representative of the beam before and after the concrete casting are presented and discussed. Finally, simplified analytical models proposed by the current European building code were adapted to the specific typology to roughly predict the ultimate s…
FEM analysis of push-out test response of Hybrid Steel Trussed Concrete Beams (HSTCBs)
2015
Abstract Aiming to investigate the steel truss–concrete stress transfer mechanism in Hybrid Steel Trussed–Concrete Beams (HSTCBs), a three-dimensional (3D) nonlinear Finite Element (FE) model is developed. The constitutive relationship of the steel composing the plates and the rebars is modeled by means of a quadri-linear law, while the concrete behavior is defined by means of a Concrete Damaged Plasticity (CDP) model, suitable for modeling concrete and brittle materials. Two main failure mechanisms are considered, namely the tensile cracking and the compressive crushing. In order to accurately grasp the complicate dowel and bond phenomena arising at the steel–concrete interface, a 3D solid…
Determination of consensus kQ values for megavoltage photon beams for the update of IAEA TRS-398
2020
The IAEA is currently coordinating a multi-year project to update the TRS-398 Code of Practice for the dosimetry of external beam radiotherapy based on standards of absorbed dose to water. One major aspect of the project is the determination of new beam quality correction factors, kQ, for megavoltage photon beams consistent with developments in radiotherapy dosimetry and technology since the publication of TRS-398 in 2000. Specifically, all values must be based on, or consistent with, the key data of ICRU Report 90. Data sets obtained from Monte Carlo (MC) calculations by advanced users and measurements at primary standards laboratories have been compiled for 23 cylindrical ionization chamb…
Experimental Investigation of the Shear Response of Precast Steel-Concrete Trussed Beams
2017
The results of an experimental campaign of three-point bending tests on precast composite beams, named hybrid steel-trussed concrete beams (HSTCBs), are provided. HSTCBs are typically constituted by a precast steel truss embedded in a block of concrete cast in place. Two series of specimens were manufactured, designed such that shear failure would occur, and tested under positive and negative bending moment. The experimental results obtained showed that fragile shear failure occurred in almost all cases, evidencing the crisis of the compressed concrete strut involved in the collapse mechanism. Yielding of the steel members provided ductility to the system, especially in those cases in which…
A one-dimensional model for dynamic analysis of generally layered magneto-electro-elastic beams
2013
Abstract A new one-dimensional model for the dynamic problem of magneto-electro-elastic generally laminated beams is presented. The electric and magnetic fields are assumed to be quasi-static and a first-order shear beam theory is used. The electro-magnetic problem is first solved in terms of the mechanical variables, then the equations of motion are written leading to the problem governing equations. They involve the same terms of the elastic dynamic problem weighted by effective stiffness coefficients, which take the magneto-electro-mechanical couplings into account. Additional terms, which involve the third spatial derivative of the transverse displacement, also occur as a result of the …
Comparison of laser and power bleaching techniques in tooth color change
2017
BACKGROUND Laser-assisted bleaching uses laser beam to accelerate release of free radicals within the bleaching gel to decrease time of whitening procedure. The aim of this study was to compare the efficacy of power bleaching using Opalescence Xtra Boost® and laser bleaching technique using LaserSmile gel and diode laser as an activator in their tooth whitening capacity. MATERIAL AND METHODS Student t test showed that the laser bleaching group significantly outperformed the power bleaching group in changing ∆E (p=0.977). RESULTS Similarly, while comparing the groups in changing ∆L, the laser bleaching group indicated significantly superior results (p=0.953). Statistical data from student t …
Combination of D0 measurements of the top quark mass
2017
We present a combination of measurements of the top quark mass by the D0 experiment in the lepton+jets and dilepton channels. We use all the data collected in Run I (1992--1996) at $\sqrt s=1.8$ TeV and Run II (2001--2011) at $\sqrt s=1.96$ TeV of the Tevatron $p \bar{p}$ collider, corresponding to integrated luminosities of 0.1 fb$^{-1}$ and 9.7 fb$^{-1}$, respectively. The combined result is: $m_t = 174.95 \pm0.40\,{\rm(stat)} \pm 0.64\,{\rm(syst)}\,{\rm{GeV}}=174.95 \pm 0.75 \, {\rm{GeV}}$.
Combined Forward-Backward Asymmetry Measurements in Top-Antitop Quark Production at the Tevatron
2018
The CDF and D0 experiments at the Fermilab Tevatron have measured the asymmetry between yields of forward- and backward-produced top and antitop quarks based on their rapidity difference and the asymmetry between their decay leptons. These measurements use the full data sets collected in proton-antiproton collisions at a center-of-mass energy of √s=1.96 TeV. We report the results of combinations of the inclusive asymmetries and their differential dependencies on relevant kinematic quantities. The combined inclusive asymmetry is At¯tFB=0.128±0.025. The combined inclusive and differential asymmetries are consistent with recent standard model predictions.
Precise measurement of the top quark mass in dilepton decays using optimized neutrino weighting
2016
We measure the top quark mass in dilepton final states of top-antitop events in proton-antiproton collisions at sqrt(s) = 1.96 TeV, using data corresponding to an integrated luminosity of 9.7 fb^-1 at the Fermilab Tevatron Collider. The analysis features a comprehensive optimization of the neutrino weighting method to minimize the statistical uncertainties. We also improve the calibration of jet energies using the calibration determined in top-antitop to lepton+jets events, which reduces the otherwise limiting systematic uncertainty from the jet energy scale. The measured top quark mass is mt = 173.32 +/- 1.36(stat) +/- 0.85(syst) GeV.
Combination of Searches for Invisible Higgs Boson Decays with the ATLAS Experiment
2019
Dark matter particles, if sufficiently light, may be produced in decays of the Higgs boson. This Letter presents a statistical combination of searches for H → invisible decays where H is produced according to the standard model via vector boson fusion, Z(ℓℓ)H, and W/Z(had)H, all performed with the ATLAS detector using 36.1 fb⁻¹ of pp collisions at a center-of-mass energy of √s = 13 TeV at the LHC. In combination with the results at √s = 7 and 8 TeV, an exclusion limit on the H → invisible branching ratio of 0.26(0.17-0.05+0.07) at 95% confidence level is observed (expected).