Search results for "Baffle"
showing 10 items of 44 documents
Experimental study on triangular central baffle flume
2019
Abstract In this paper the results of the experiments performed to study the flow through a Triangular Central Baffle Flume (TCBF) are reported. The investigated flume consists of a triangular baffle of the apex angle of 75° with a given base width. The theoretical stage-discharge formula was deduced by applying the Buckingham's Theorem and incomplete self-similarity hypothesis and was calibrated using the laboratory measurements carried out in this investigation. The proposed stage-discharge formula is characterized by a mean absolute relative error of 7.4% and 72% of the data points are in an error range of ±5%. The results indicate that TCBF flume is characterized by a flow capacity high…
On vortex shape in unbaffled stirred vessels as measured by digital image analysis
2012
In this work, digital image analysis coupled with a suitable shadowgraphy-based technique is employed to investigate the shape of the free-surface vortex that forms in uncovered unbaffled tanks stirred by either a D=T/3 Lightnin A310 or a D=T/3 Rushton turbine. The technique is based on back-lighting the vessel and suitably averaging vortex images over time. Data obtained show that the two different impellers give rise to quite different vortex shapes. A novel 2-parameter model is proposed that successfully describes vortex shapes obtained with both impellers.
Free vortex shape in Uncovered Unbaffled Stirred Tanks (UUST) agitated by Rushton turbines
2012
The main feature of unbaffled stirred tanks is the highly swirling liquid motion, which leads to the formation of a central vortex on the liquid free surface, when the vessel is operated without top-cover (Uncovered Unbaffled Stirred Tanks, UUST). In this work, original data on fluid dynamics characteristics of (UUST) agitated by a Rushton turbine are presented. In particular, digital image analysis is employed to accurately assess vortex shape and validate an original model for its description. The model describes vortex shape in the case of sub-critical systems (when vortex bottom is placed above the impeller plane) as well as in the case of super-critical systems (when vortex bottom fall…
Designing an x-ray baffle for stray-light reduction at the focal plane of the Wide Field Imager on board EDGE
2008
We exploited a ray-tracing Montecarlo code to investigate the effects of stray-light on the performances of the Wide Field Imager (FoV = 1.5 deg) on board the EDGE satellite. We found non negligible stray-light contamination up to ~ 8 deg off-axis angles. We discuss the benefits of a baffle in order to reduce this contamination, that would strongly affect the telescope sensitivity, and present two possible baffle designs based on results of simulations.
MIXING TIME IN UNBAFFLED STIRRED TANKS
2012
Unbaffled stirred tanks, despite their poorer mixing performance with respect to baffled vessels, are gaining a growing industrial interest as they provide significant advantages in selected applications, including a number of biochemical, food and pharmaceutical processes. There still is however a general lack of information on their mixing performance, that needs to be addressed in order to fully exploit their application potential. The present work is aimed at providing experimental information on mixing rates in an unbaffled vessel operated without top-cover (Uncovered Unbaffled Stirred Tank, UUST). The planar laser induced fluorescence (PLIF) technique was adopted for measuring the dis…
POWER CONSUMPTION IN UNBAFFLED TANKS: SUB AND SUPER-CRITICAL REGIMES
2013
Unbaffled stirred tanks are increasingly recognized as a viable alternative to common baffled tanks for a range of processes (e.g. crystallization, food and pharmaceutical processes, etc) where the presence of baffles is undesirable for some reason. Also, in the case of bioreactors for animal cell cultivation, where cell damage is mainly related to bubbles bursts at the air –liquid interface, unbaffled tanks have been shown to be able to provide sufficient mass transfer through the free surface vortex. As a consequence bubble formation and subsequent bursting is conveniently avoided (Scargiali et al., 2012). The same feature clearly makes unbaffled vessels potentially advantageous for any f…
CFD simulation of radially stirred baffled and unbaffled tanks
2019
Stirred tanks typically employed in process industries are provided with baffles. Although the presence of baffles is known to guarantee good mixing rates, unbaffled vessels may be compulsory in some applications as crystallization, bioremediation, biotechnology and ore industry. A better understanding of unbaffled stirred vessels flow dynamics may allow (i) a proper design to be performed and (i) conditions/processes where baffle presence can be avoided to be recognized. In the present study, the k-ω SST was used to simulate an unbaffled tank from early to fully turbulent regime (Re≈600-33,000). The unbaffled tank simulated has a diameter T=0.19m and is stirred by a standard six-bladed Rus…
Particle Suspension in Vortexing Unbaffled Stirred Tanks
2016
Three-phase processes in which particle suspension has to be achieved in conjunction with gas dispersion are traditionally carried out in sparged, baffled stirred tanks. The operation of such tanks can suffer, however, from particles tending to block the sparger holes. A viable alternative might be provided by uncovered unbaffled stirred tanks (UUSTs), where gas self-injection can occur when the free-surface vortex reaches the impeller blades and gas bubbles begin to be ingested by the liquid. In this work, the particle suspension and liquid aeration performances in three-phase UUSTs were experimentally investigated and compared with relevant literature correlations concerning baffled syste…
Power Consumption in Uncovered Unbaffled Stirred Tanks: Influence of the Viscosity and Flow Regime
2013
Notwithstanding the increasing industrial interest toward unbaffled tanks, available experimental information on their behavior is still scant, even for basic quantities such as the mechanical power drawn. In this work, the influence of the Reynolds and Froude numbers on the power consumption characteristics is presented for unbaffled stirred tanks operating both in nonaerated conditions (subcritical regime) and in aerated conditions (supercritical regime), i.e., when the free surface vortex has reached the impeller and the gas phase is ingested and dispersed inside the reactor. Experimental results obtained at various liquid viscosities show that power numbers obtained in subcritical condi…
SIMULAZIONI CFD DEL CAMPO DI MOTO A BASSO NUMERO DI REYNOLDS IN BIOREATTORI AGITATI CON E SENZA SETTI FRANGIVORTICE
2016
I recipienti meccanicamente agitati sono apparecchiature frequenti dell’industria chimica di processo. Questi sono tipicamente dotati di setti frangivortice (recipienti baffled) atti a rompere il moto prettamente tangenziale tipico dei recipienti sprovvisti di setti (recipienti unbaffled) e convertirlo in moto assiale e radiale. La presenza dei setti evita inoltre nella zona centrale del sistema la formazione del vortice d’aria che può talvolta essere indesiderato o in taluni casi creare instabilità una volta arrivato alla girante. I recipienti unbaffled sono considerati quindi dei miscelatori meno efficienti rispetto a quelli provvisti di setti. Tali sistemi sono pertanto ad oggi impiegati…