Search results for "Base"
showing 10 items of 8362 documents
High-performing Sn-Co nanowire electrodes as anodes for lithium-ion batteries
2012
Abstract The preparation of Sn 2 Co 3 nanowire arrays (NWs) electrogrown inside the channels of polycarbonate membranes and their characterization as anodes for Li-ion batteries both in half-cell vs. Li and in battery configuration are reported. The Sn 2 Co 3 NW electrodes tested by deep galvanostatic charge/discharge cycles in ethylene carbonate-dimethylcarbonate (1:1) – LiPF 6 1 M displayed 80% capacity retention after 200 cycles at C/2 and 30 °C, and a high charge and discharge rate capability at C-rate from C/3 (0.33 A/g) to 10C (10 A/g) at 30° and 10 °C. Electrodes with the highest alloy loading delivered up to 0.6 mAh cm −2 at C/2. The performance of these electrodes in battery config…
Efficient contactless power transfer system for EVs
2016
Based on the inductive power transfer (IPT), the contactless approach allows safe and comfortable operations of battery charging for Electric Vehicles (EVs). In this paper, a contactless system particularly suitable for E-bike battery charging is proposed. A practical realization of the system has been carried out, aiming at the system evaluation in terms of working and efficiency. Through a phase shift modulation, a power regulation has been implemented. The target power level is 100 W.
An efficient wireless power transfer prototype for electrical vehicles
2017
Based on the inductive power transfer (IPT), the contactless approach allows safe and comfortable operations of battery charging for Electric Vehicles (EVs). In this paper, a contactless system particularly suitable for E-bike battery charging is proposed. A practical realization of the system has been carried out, aiming at the system evaluation in terms of working and efficiency. Through a phase shift modulation, a power regulation has been implemented. The target power level is 100 W.
Toward Tin-Based High-Capacity Anode for Lithium-Ion Battery
2014
Electrochemical deposition of SnCo alloys inside the nanometric pores of commercial membranes is described. Composition, morphology and crystallographic structure of the synthesized nanostructured alloys are reported as well as the results of electrochemical tests carried out both in half-cell and in full battery configuration to investigate the performance of these SnCo alloys as anodes for lithium-ion batteries. Optimized depositions yielded nanostructured alloys that performed 200 deep galvanostatic cycles at C/2 and 30 °C with 80 % capacity retention and coulombic efficiency higher than 97 % after 40 cycles Moreover, charge-discharge rate capability tests showed the high performance of …
Battery technologies for electric vehicles
2017
This chapter gives a brief overview of the following types of vehicles: battery electric vehicle (BEV), plug-in hybrid electric vehicle (PHEV), and hybrid electric vehicle (HEV). It then provides a comprehensive summary of the electrochemical energy storage including Ni-MH battery, Li-ion battery, and advanced rechargeable battery. Battery chemistry is explained in a detailed manner including an abbreviated modelling approach. Also, the issues of battery-charging method, management, and monitoring are addressed. The chapter concludes with a discussion on battery cell voltage balancing and temperature monitoring in addition to the battery state-of-charge (SOC) estimation.
Control subsystem design for wireless power transfer
2014
Recently, the wireless power transfer has been increasingly employed. Particularly for the electric vehicles, the wireless solution is attractive for contactless battery charging, based on the Inductive Power Transfer (IPT). In this paper, a 150W prototype for IPT-based battery charging is presented and design criteria are reported. In addition to the power stage analysis, a proper control strategy is proposed. Simulation and experimental results are shown. The proposed control method aims at regulating the load current against variations in the magnetic coupling, so that the required amount of power can be supplied despite of unexpected decreases in the coupling efficiency.
Power Grid Integration and Use-Case Study of Acid-Base Flow Battery Technology
2021
There are many different types of energy storage systems (ESS) available and the functionality that they can provide is extensive. However, each of these solutions come with their own set of drawbacks. The acid-base flow battery (ABFB) technology aims to provide a route to a cheap, clean and safe ESS by means of providing a new kind of energy storage technology based on reversible dissociation of water via bipolar electrodialysis. First, the main characteristics of the ABFB technology are described briefly to highlight its main advantages and drawbacks and define the most-competitive use-case scenarios in which the technology could be applied, as well as analyze the particular characteristi…
On incorporating the paradigms of discretization and Bayesian estimation to create a new family of pursuit learning automata
2013
Published version of an article in the journal: Applied Intelligence. Also available from the publisher at: http://dx.doi.org/10.1007/s10489-013-0424-x There are currently two fundamental paradigms that have been used to enhance the convergence speed of Learning Automata (LA). The first involves the concept of utilizing the estimates of the reward probabilities, while the second involves discretizing the probability space in which the LA operates. This paper demonstrates how both of these can be simultaneously utilized, and in particular, by using the family of Bayesian estimates that have been proven to have distinct advantages over their maximum likelihood counterparts. The success of LA-…
Near field improvements of stochastic collaborative beamforming in wireless sensor networks
2020
Wireless sensor networks (WSN) are groups of small devices that contain a microcontroller in which a large number of sensors can be added. They transmit data and communicate to each other in the ISM band, standard IEEE 802.15.4, exchanging packets using a multi-hop routing. These devices are named motes and are nodes of the WSN. They are very simple and easy to program, powered by batteries of 1.5Volts (AA and AAA). The nodes are autonomous elements that can be deployed implementing any type of network. In a typical deployment the nodes communicate with each other and with a master node or Base Station (BS), which in turn transmits the information to an external server, which collects the e…
Practical Considerations in the Implementation of Collaborative Beamforming on Wireless Sensor Networks
2017
Wireless Sensor Networks (WSNs) are composed of spatially distributed autonomous sensor devices, named motes. These motes have their own power supply, processing unit, sensors and wireless communications However with many constraints, such as limited energy, bandwidth and computational capabilities. In these networks, at least one mote called a sink, acts as a gateway to connect with other networks. These sensor networks run monitoring applications and then the data gathered by these motes needs to be retrieved by the sink. When this sink is located in the far field, there have been many proposals in the literature based on Collaborative Beamforming (CB), also known as Distributed or Cooper…