Search results for "Behaviour"

Numerical analysis and experimental comparison on CFRP reinforced masonry walls subjected to transverse loads

2009

The out-of-plane behaviour of walls, unreinforced and reinforced by using CFRP strips, is studied by means of experimental investigation and numerical modelling. The FEM model is based on a linear constitutive law both for the ashlars and the mortar joints constituting the masonry and the lines of potential delamination are taken into account by means of an interface element with bi-linear law, reproducing the opening failure mode. When the reinforcement is introduced, an interface element with bi-linear law is also used, reproducing the sliding failure mode. Comparison between the numerical and experimental results shows the reliability of the modelling. Moreover, a parametric analysis is …

OUT OF PLANE CAPACITY OF INFILLS AFTER IN PLANE LOADING: A PREDICTION ANALYTICAL MODEL

2019

Earthquakes produce on infills In-Plane (IP) and Out-Of-Plane (OOP) actions. The recent earthquakes have proved that the OOP collapse of infills is a diffused mechanism also in buildings designed to resist to seismic events in agreement to the most modern strategies. This fact makes the question arises about the safety of infills with respect OOP actions. The strong interaction between IP and OOP behaviour of infills traduces in a progressively reduction of the OOP strength. Further, only in few cases codes suggest adequate strategies to face this issue. For what above, in the paper the reduction of OOP strength because of the IP damage is studied by an extended numerical experimental campa…

Numerical seismic performance of a rammed earth dwelling considering the use of a textile reinforced mortar system

Rammed earth buildings represent a considerable portion of the existing vernacular building stock of several countries and they are very common in the southern region of Portugal. The historical and architectural values of these constructions, along with their recognized high seismic vulnerability, have made the structural rehabilitation of earthen buildings a priority among the scientific community. Despite some recent studies, the prediction of the seismic response of these buildings is still a challenging task. This paper presents the results of a numerical investigation on the seismic behaviour of a representative rammed earth building located in Alentejo (South of Portugal). Numerical …

Effectiveness of Flax-TRM composites under traction

2023

The scientific research in the field of masonry structures is increasingly welcoming the adoption of innovative and sustainable rehabilitation techniques aimed at the safeguarding of the Built Cultural Heritage. Textile Reinforced Matrix (TRM) composites are the most widely investigated strengthening systems for ancient masonry structures, thanks to their high compatibility level with the material substrates in terms of fire resistance, chemical/physical aspects, reversibility property, little impact on dimensions, stiffness and weight. Nevertheless, in the last years, the growing concern on sustainability increased the interest in products with low environmental impact, for promoting circu…

Seismic response of RC frames with HSTC beams endowed with friction damper devices

2019

The aim of this work is to compare the seismic response of RC frames built using Hybrid Steel-Trussed Concrete Beams (HSTCBs) whether or not equipped with friction damper devices installed at the beam-to-column joints. Due to their small depth-to-span ratios, HSTCBs usually lead to a large amount of rebar within the beam-column joint, potentially reducing its cyclic performance. Therefore, the adoption of a friction system at the beam-tocolumn joint provides two main advantages, i.e. limiting the shear forces, and thus the potential damage, in the panel zone thanks to the increasing of the bending moment lever arm, and assigning to the device the task of dissipating the incoming seismic ene…

Design of friction connections in R.C. structures with hybrid steel-trussed concrete beams

2019

In this work a feasibility study on the use of friction devices within beam-to-column joints of RC structures is conducted. The connection is made between RC columns cast in-situ and semi-prefabricated steel-concrete beams, named Hybrid Steel-Trussed-Concrete Beams (HSTCBs). Nowadays, HSTCBs are widely adopted in civil and industrial buildings and, therefore, it is required to evaluate their compliance with the capacity design criteria and their seismic energy dissipation capability. However, the design of the reinforcement of such beams usually lead to the adoption of large amount of steel within the panel zone which becomes potentially vulnerable to the effects of seismic cyclic actions a…

Travi reticolari miste- Problemi locali nella trasmissione degli sforzi

2009

Experimental test results on the local behavior of the typical Italian typology of hybrid steel-to-concrete beam are presented and discussed in order to provide insight on transfer mechanism between different components of the beam. Preliminarily, in order to investigate on the bearing capacity of the welding and on the local instability problems that can arise in the trusses before concrete casting, tensile tests on specimens reproducing different types of welded joints, and push-out tests on bare specimen have been performed. Then, the transfer mechanism between steel trusses and concrete is investigated by means of push-out tests carried out also in displacement controlled mode. Results …

A numerical study on the effect of the interface material model on the tensile behaviour of FRCM strips

2019

Fibre Reinforced Cementitious Matrix (FRCM) composites are becoming increasingly popular for strengthening masonry structures for which the compatibility of the inorganic matrix with the chemical and physical properties of the support makes it advantageous to adopt such systems. However, despite the large use of FRCMs for strengthening applications, the characterization and modelling of the mechanical response in tension of these systems is an open issue. In fact, the constitutive tensile law of the composite shows to be affected by different variables, such as the clamping system adopted during tensile test, the gauge length used for recording strains, the monitoring of the number of yarns…

Advances in experimental characterization and modelling of FRCM composites for structural retrofitting

2023

Questa tesi presenta i risultati di una campagna sperimentale incentrata sulla caratterizzazione della trazione dei basalt e glass FRCM e della caratterizzazione del legame di aderenza composito-Calcarenite. Il lavoro sperimentale è completato dalla proposta di due modelli numerici sia per prove di trazione che per quelle di aderenza. L'indagine sperimentale è stata condotta considerando l'influenza di diversi rinforzi, matrici e metodi di prova. I risultati sperimentali consentono di valutare l'effetto della malta sulle curve sforzo-deformazione, la resistenza, la duttilità e le modalità di crisi. Inoltre, la tesi fornisce un importante contributo per valutare l'influenza di diversi metodi…

Non-linear Correlation Coefficients for pushover analysis

2013

Aiming to put forward an improvement on Multimodal Pushover Analysis, a modified version of the modal correlation rule that takes into account the non-linear behavior of structures is proposed. The modification is primarily based on using the correlation coefficients consistent with the mechanical and dynamical properties of the hysteretic oscillators utilized in the MPA method, i.e. determined taking into account the second order statistics pertinent to the non-linear oscillators. Initially, the new correlation coefficients are evaluated by Monte Carlo Simulations (MCS), assuming a spectrum-compatible representation of the seismic input. The results of a large numerical parametric analysis…