Search results for "Bending"

Generalized curved beam on elastic foundation solved by Transfer Matrix Method

2011

A solution of space curved bars with generalized Winkler soil found by means of Transfer Matrix Method is presented. Distributed, concentrated loads and imposed strains are applied to the beam as well as rigid or elastic boundaries are considered at the ends. The proposed approach gives the analytical and numerical exact solution for circular beams and rings, loaded in the plane or perpendicular to it. A well-approximated solution can be found for general space curved bars with complex geometry. Elastic foundation is characterized by six parameters of stiffness in different directions: three for rectilinear springs and three for rotational springs. The beam has axial, shear, bending and tor…

Bounds on plastic strains for elastic plastic structures in plastic shakedown conditions

2007

The problem related to the computation of bounds on plastic deformations for structures in plastic shakedown condition (alternating plasticity) is studied. In particular, reference is made to structures discretized by finite elements constituted by elastic perfectly plastic material and subjected to a special combination of fixed and cyclic loads. The load history is known during the steady-state phase, but it is unknown during the previous transient phase; so, as a consequence, it is not possible to know the complete elastic plastic structural response. The interest is therefore focused on the computation of bounds on suitable measures of the plastic strain which characterizes just the fir…

Development of Composites with a Self-Healing Function

2015

This research aimed to realize experimentally the facilevascular self-healing system in epoxy glass fibre reinforced composite. Using flexiblepolytetrafluoroethylene tubes as removable preforms, the channels were embeddedinto both neat epoxy resin and unidirectional glass-fibre reinforced epoxy laminate.Room temperature curable epoxy resin with a surfactant and an amine-basedhardener were the components of the binary healing agent. The specimens oftapered double cantilever beam geometry were subjected to Mode I fracture tests.Fracture of specimens released the healing agent from channels and triggeredself-healing process of the crack. Tested neat epoxy resin specimensdemonstrated recovery o…

The significance of the triceps surae muscle action as a determinant in the biomechanical genesis of ski fall injuries

1985

In an epidemiologic study of 700 ski fall injuries YOUNG /1/ established a classification of the different fall modes involved. In more than 60 % of all falls that lead to an injury he found a forward bending motion of the body which is frequently coupled with a twisting of the body around the lower extremity. This clearly shows the importance of the forward motion component of the skier’s body in ski fall traumatology. The type of injury and its location depend on the action of the ski binding system. If the binding does not release in a ski fall, the fraction of injuries in the lower extremity amounts to nearly 100 %. If the binding does release, however, the injuries ocurring in this cas…

Nodular cast iron fatigue lifetime in cyclic plane bending

2012

The fatigue behavior of a component is strongly dependent on the material and its surface condition. Therefore, the manner in which the surface is prepared during component manufacturing (surface roughness, residual stresses etc.) has a decisive role in dictating the initiation time for fatigue cracks. The fatigue behavior of the same material, a nodular cast iron, with three different surface conditions (fine ground, sand blast and as-cast) has been investigated under cyclic plane bending. The results show differences in fatigue strength, which are associated with the surface conditions. The characteristics of the surface layers of the different test specimens were examined by metallograph…

RC Columns Strengthened with Steel Angles and Battens: Experimental Results and Design Procedure

2013

In this paper, an analytical model for the design of axially loaded strengthened RC columns with steel angles and battens is presented. Cases of directly loaded and not directly loaded steel angles are considered. The model considers the contribution in confinement pressures caused by transverse battens and steel angles and the contribution in terms of the load-carrying capacity of steel angles subjected to axial force and the bending moment. An experimental investigation on the compressive behavior of eight short, confined, RC columns externally strengthened with steel angles and steel battens with various pitches was carried out, and has been utilized as support for the analytical model. …

A reanalysis of spinal motion during vibration

1987

Calibrated film of the motion of the lumbar spine during vibration was reanalysed, making use of a number of computer based techniques to improve accuracy and reduce measurement noise. The results demonstrated resonant behaviour at about 4 Hz and indicated that at vibration levels of the order of 1 m/s2 there exists bending of the order of 1° (peak to peak) between adjacent vertebrae in the lumbar spine. The bending is complex and involves phase differences along the spine and possibly a rocking motion of the pelvis.

Blends of Semiflexible Polymers: Interplay of Nematic Order and Phase Separation

2021

Mixtures of semiflexible polymers with a mismatch in either their persistence lengths or their contour lengths are studied by Density Functional Theory and Molecular Dynamics simulation. Considering lyotropic solutions under good solvent conditions, the mole fraction and pressure is systematically varied for several cases of bending stiffness κ (the normalized persistence length) and chain length N. For binary mixtures with different chain length (i.e., NA=16, NB=32 or 64) but the same stiffness, isotropic-nematic phase coexistence is studied. For mixtures with the same chain length (N=32) and large stiffness disparity (κB/κA=4.9 to 8), both isotropic-nematic and nematic-nematic unmixing oc…

Peri-Implant Distal Radius Fracture: Proposal of a New Classification

2022

A peri-implant fracture near the volar plate of the distal radius represents a rarity and can be associated with a mechanical failure of the devices. A literature review was conducted including all fractures that occurred around a volar wrist plate, which could be associated with an ulna fracture. All articles published until December 2021 were considered according to the guidelines presented in the PRISMA Statement. The search was conducted with the PubMed electronic database, Cochrane Database of Systematic Reviews, Medline, Embase, and Google Scholar. Only nine cases of these fractures were reported in the literature. The causes could be due to delayed union/non-union of the old fracture…

Piezoresistive semi-transparent flexible sensors by bithiophene fulleropyrrolidine thin films

Piezoresistive sensors are considered among the fundamental components of the future wearable electronic devices, given their potential applications in artificial skin, motion capture and personalized medicine.[1-5] Here, we present a cost-effective, viable fabrication approach to realize piezoresistive sensors using a novel polymeric biotiophene fulleropyrrolidine system (bis-C60Bi) synthesized on flexible ITO/PET supports by electrochemical chronoamperometry. By applying an anodic potential (1.5 V) to a solution containing the monomer, it is possible to obtain a homogeneous semi-transparent thin film on the ITO/PET surface (see Figure). AFM, XPS, UV-vis have been employed to characterize …