Search results for "Biomedical engineering"
showing 10 items of 2020 documents
A New Absorbable Synthetic Substitute With Biomimetic Design for Dural Tissue Repair
2015
Dural repair products are evolving from animal tissue-derived materials to synthetic materials as well as from inert to absorbable features; most of them lack functional and structural characteristics compared with the natural dura mater. In the present study, we evaluated the properties and tissue repair performance of a new dural repair product with biomimetic design. The biomimetic patch exhibits unique three-dimensional nonwoven microfiber structure with good mechanical strength and biocompatibility. The animal study showed that the biomimetic patch and commercially synthetic material group presented new subdural regeneration at 90 days, with low level inflammatory response and minimal …
Dimensional stability of contemporary irreversible hydrocolloids: humidor versus wet tissue storage.
2012
Statement of problem The storage time and conditions of irreversible hydrocolloid impressions affect their accuracy and in turn the precision of the definitive cast. Recommendations for proper storage are, however, based on theoretical assumptions rather than facts. Purpose The purpose of this study was to assess the influence of the 2 most common storage conditions on the dimensional stability of 7 contemporary irreversible hydrocolloids (IH) for a period of up to 7 days. Material and methods Twelve specimens per material (Blueprint, Cavex CA37, Cavex ColorChange, Jeltrate, Orthoprint, Cavex Orthotrace, and Tetrachrom) were fabricated according to ISO/CD 21563. The specimens were either st…
Effect of simulated CO2and GaAlAs laser surface decontamination on temperature changes in Ti-plasma sprayed dental implants
2002
Background and Objective To investigate and compare temperature elevations at the implant-bone interface during simulated implant surface decontamination with a CO2 and a GaAlAs laser. Study Design/Materials and Methods Stepped cylinder implants (Frialit 2® Friadent GmbH, Mannheim, Germany) with a Titanium plasma sprayed surface were inserted into bone blocks cut from pig femurs. An artificial periimplant bone defect provided access for laser irradiation in the coronal third. Both lasers were operated at 1.0–2.5 W in the cw-mode. The bone block was placed into a 37°C water bath in order to simulate in vivo thermal conductivity and diffusitivity of heat. K-type thermocouples connected to a d…
Thermal increase in the oral mucosa and in the jawbone during Nd:YAG laser applications. Ex vivo study
2012
Objective: Literature reports bactericidal and biostimulant effects for Nd:YAG laser procedures on bone and oral mucosa but the possible overheating can cause damage to anatomical structures. The aim of the study is the evaluation of thermal increase in different levels of oral tissues: mucosa, periosteum and bone during defocused application of Nd:YAG laser at different parameters. Study Design: Superficial thermal evaluation was performed in pig jaws with a thermal camera device; deep thermal evaluation was realized by 4 thermocouples placed at a subperiosteal level and at 1,2 and 4 mm depth in the jaw bone. Laser applications of 1 minute were performed 5 times (with a pause of 1 minute) …
In vitro histological evaluation of the surgical margins made by different laser wavelengths in tongue tissues
2016
Background: Lasers have become standard tools for the surgical treatment of oral lesions. The purpose of this study is to determine the surgical margins and histologically evaluate the tissue thermal effects induced by different types of surgical instruments. Material and Methods: Cuts were made in pork tonguesâ mucosa with different lasers (Er:YAG at 2W with and without air / water spray and at 4W with and without air / water spray; CO2 at 3.5W and 7W in pulsed mode and at 7W in continuous mode; the diode laser at 3.5W and boost 3.5W in pulsed mode; Nd:YAG at 6W, 40Hz and electroscalpel at 5W and conventional scalpel as control. Macroscopic and microscopic morphological changes were evalua…
Temperature changes induced by 809-nm GaAlAs laser at the implant-bone interface during simulated surface decontamination
2003
The aim of the study was to investigate temperature changes at the implant-bone interface during simulated implant surface decontamination with a 809-nm gallium-aluminium-arsenid (GaAlAs) semiconductor laser. Stepped cylinder implants with a diameter of 3.8 mm and a length of 11 mm with two different surfaces (sand-blasted and acid etched, and hydroxyapatite-coated) were inserted into bone blocks cut from freshly resected pig femurs. Access holes of 0.5 mm were drilled into the bone, to allow K-type thermocouples to contact periimplant bone in different parts of the cavity. An artificial periimplant bone defect provided access for laser irradiation in the coronal third. A 600-micrometer opt…
Surface Topographies of Glaucoma Drainage Devices and Their Influence on Human Tenon Fibroblast Adhesion
2010
PURPOSE. This study was performed to investigate the surface topography of different glaucoma drainage devices and to determine the effects of surface roughness on cell adhesion of cultured human tenon fibroblasts.METHODS. The surface topography of four widely used devices (Ahmed FP7 and Ahmed S-2; New World Medical, Inc., Rancho Cucamonga, CA; Baerveldt BG101-350; Advanced Medical Optics, Irvine, CA; and Molteno S1; Molteno Ophthalmic Ltd., Dunedin, New Zealand) was investigated by scanning electron microscopy, and roughness was quantified by white-light confocal microscopy. Cells were grown for 72 hours on the surfaces of implants affixed to standard culture dishes. The cells were labeled…
Efficacy of NaOCl/H2O2irrigation and GaAlAs laser in decontamination of root canals in vitro
2003
Background and Objectives To investigate the bactericidal effect of an 809 nm semiconductor laser alone, and in combination with NaOCl/H2O2 irrigation in root canals in vitro. Study Design/Materials and Methods A total of 72 human single-rooted teeth extracted for periodontal reasons were included. The crowns were removed, the roots shortened to a length of 12 mm, and the canals enlarged up to an apical size of #50 file. The specimens were autoclaved and incubated with a suspension of Streptococcus sanguinis (ATCC 10556). Laser irradiation was performed on a PC-controlled XY translation stage. A 200 micron optic fiber was used. Twelve specimens were irradiated at a power output of 1.5, 3.0,…
In-vitro-Untersuchung von biologischen und technischen Herzklappenprothesen im MRT: Beurteilung möglicher Anziehung und Erhitzung der Implantate
2000
PURPOSE In vitro evaluation of possible deflection and heating of present-day prosthetic heart valves during MR imaging at 1.5 T. METHODS 17 prosthetic heart valves, 12 technical and 5 biological, were investigated using a 1.5 Tesla Siemens Vision system. Deflection was measured at the edge of a 1.5 Tesla superconducting magnet. Each valve was then submerged in a vial of a 1/1 electrolyte solution and temperature was measured before and after imaging with a turbo-spin-echo sequence (TR 5200 ms, TE 138 ms, Flip angle 180 degrees, acquisition time 10.5 minutes, length of echo train 29). MR imaging was performed with phase encoding parallel and perpendicular to the plane of the valves. RESULTS…
Nanocapsules generated out of a polymeric dexamethasone shell suppress the inflammatory response of liver macrophages.
2012
Abstract Dexamethasone (DXM) is a synthetic glucocorticoid with anti-inflammatory properties. Targeted delivery of dexamethasone to inflammatory cells, e.g. macrophages and Kupffer cells represents a promising approach to minimize side effects. The aim of the present study was to induce a targeted transport of novel DXM-based biodegradable nanocapsules to phagocytic cells. Nanocapsules (NCs) consisting of a hydroxyethylated glucose polymer (hydroxyethyl starch, HES) shell with encapsulated DXM and NCs synthesized exclusively in inverse miniemulsion out of DXM were investigated. Non-parenchymal murine liver cells served as target cells. HES-DXM NCs were predominantly incorporated by Kupffer …