Search results for "Biomedical engineering"
showing 10 items of 2020 documents
Simultaneous atrial and ventricular restitution and fibrillation analyses using a low-cost scalable panoramic whole-heart optical mapping configurati…
2021
Abstract Introduction Optical mapping (OM) is the primary method for imaging electrophysiologically relevant parameters from the outer surface of Langendorff-perfused hearts. However, current panoramic OM systems are financially challenging, require multiple sensors to map wide areas of the surface with overlapping regions and missing areas of interest due to the intrinsic shape of the heart. We proposed different panoramic configurations to dynamically characterize atrial and ventricular function during arrhythmia and, in presence of a coronary occlusion. Methods We devised both a multi-sensor and a single sensor system integrated with the perfusion circuit comprising sensor elements, a co…
PLLA/Fibrin Tubular Scaffold: A New Way for Reliable Endothelial Cell Seeding
2014
In the present work a simple and quick technique for cell seeding into tubular-shaped scaffolds, which allows a homogeneous cell distribution, was tested. The poly-L-lactide (PLLA) scaffolds, prepared via diffusion induced phase separation (DIPS), were filled with fibrin gel in order to obtain a hybrid scaffold for Vascular Tissue Engineering applications. The formation of immobilized fibrin networks on the inner surface of the tubular scaffolds was observed using confocal microscopy and SEM. Morphological analysis of the so-obtained scaffold revealed that the fibrin gel is uniformly distributed on the internal surface of the scaffold, leading to an organized structure. Moreover a penetrati…
Modified Silk with Cell-Adhesive and Non-Thrombogenic Properties as a Tissue Engineering Substrate
2016
IntroductionReplacement of damaged tissue is nowadays an aim of tissue engineering. This technique involves the use of porous or fibrous structures – the so-called scaffolds – that support the colonization with the desired cell type and which are degraded after fulfilling their temporary supporting function. Basic requirements for the prevailing materials used in this field are nontoxicity, low immunogenicity and cell-adhesiveness. Furthermore blood-contacting devices should exhibit low thrombogenicity.The biopolymer silk, mainly consisiting of the protein silk fibroin, matches some of these criteria but bare silk does not facilitate cellular adhesion and growth and unfortunately the materi…
Radiation leakage study for the Valencia applicators
2011
Abstract Introduction and purpose The Valencia applicators which are accessories of the microSelectron-HDR afterloader (Nucletron, Veenendaal, The Netherlands) are designed to treat skin lesions. These cup-shaped applicators are an alternative to superficial/orthovoltage x-ray treatment units. They limit the irradiation to the required area using tungsten-alloy shielding, and are equipped with a tungsten-alloy flattering filter allowing the treatment of skin tumors, the oral cavity, vaginal cuff, etc. The tungsten-alloy thickness to shield radiation is not the same in all parts of the applicators. This fact led us to question whether the leakage radiation differs depending on where it is me…
Modeling the electromechanical impedance technique for the assessment of dental implant stability
2015
We simulated the electromechanical impedance (EMI) technique to assess the stability of dental implants. The technique consists of bonding a piezoelectric transducer to the element to be monitored. When subjected to an electric field, the transducer induces structural excitations which, in turn, affect the transducer's electrical admittance. As the structural vibrations depend on the mechanical impedance of the element, the measurement of the transducer's admittance can be exploited to assess the element's health. In the study presented in this paper, we created a 3D finite element model to mimic a transducer bonded to the abutment of a dental implant placed in a host bone site. We simulate…
Virtual simulation of an osseointegrated trans-humeral prosthesis: A falling scenario
2018
Abstract Introduction Traditional prosthetic solutions expose the amputee to numerous problems that limit his ability to safely perform the normal activities of daily life. In order to eliminate the problems related to the use of the traditional prosthesis with socket, a new technique was developed for fixing the prosthesis to the amputees based on the principle of osseointegration. The aim of this paper is to study and analyze the stress distribution on the interface between a trans-humeral osseointegrated prosthetic implant and the residual bone, identifying the most stressed areas and thus foreseeing possible failure phenomena of the entire prosthetic system and, after, to compare the st…
Quantification of Myocardial Blood Flow Using Magnetic Resonance Imaging with Different accelerated Pulse Sequences
2009
The aim of this study was to compare SRTurboFLASH, SR-TrueFISP, and SR-segEPI pulse sequences using a twofold TSENSE-acceleration with regard to their use in quantification of myocardial blood flow (MBF). Six healthy volunteers were examined at 1.5T by first pass myocardial perfusion MRI at rest using all three TSENSE-accelerated pulse sequences. For absolute quantifi-cation of MBF XSIM software with the MMID4 model has been used. MBF analyses revealed significant MBF differences between SRTurboFLASH and SR-segEPI compared to SR-TrueFISP (p<0.005 and p<0.001, respectively). Differences between SRTurboFLASH and SR-segEPI were not statistically significant. The median MBF values for SR-TurboF…
The importance of correct implants positioning and masticatory load direction on a fixed prosthesis
2018
Background Through the biomechanical study of dental implants, it is possible to understand the dissipation effects of masticatory loads in different situations and prevent the longevity of osseointegration. Aims: To evaluate the microstrains generated around external hexagon implants, using axial and non-axial loads in a fixed four-element prosthesis with straight implants and implants inclined at 17°. Material and Methods Three implants were modeled using CAD software following the manufacturer's measurements. Then, implants were duplicated and divided into two groups: one with straight implants and respective abutments, and the other with angled implants at 17° and respective abutments. …
Strictness vs. flexibility: Simulation-based recognition of strategies and its success in soccer
2021
Abstract Introduction: Recognition and optimization of strategies in sport games is difficult in particular in case of team games, where a number of players are acting “independently” of each other. One way to improve the situation is to cluster the teams into a small number of tactical groups and to analyze the interaction of those groups. The aim of the study is the evaluation of the applicability of SOCCER© simulation in professional soccer by analyzing and simulation of the tactical group interaction. Methods: The players’ positions of tactical groups in soccer can be mapped to formation-patterns and then reflect strategic behaviour and interaction. Based on this information, Monte Carl…