Search results for "Boehmite"
showing 10 items of 17 documents
Batch-to-Melt Conversion Kinetics in Sodium Aluminosilicate Batches Using Different Alumina Raw Materials
2016
The batch-to-melt conversion in batches of sand, soda ash and corundum (C), alumina spinel (A), boehmite (B), or gibbsite (G) as Al2O3 carrier are studied using thermal analysis, X-ray diffraction, and 27Al nuclear magnetic resonance spectroscopy. Laboratory-scaled batches are either heated continuously or quenched from 1600°C in a series of increasing dwell times. The results show that the conversion from the raw materials to the fresh melt proceeds in two kinetic stages. During the first stage (3–5 min), fast conversion of nearly 95% by mass occurs and the conversion coefficient increases in the order G < C ≈ A < B. The second stage is controlled by the slow dissolution of intermediate cr…
Thermal stability of transition alumina nanocrystals with different microstructures
2018
Abstract The preparation of well-crystallized boehmite nanoparticles with different morphologies, encompassing from aciculae or rods of 320, 150 and 70 nm of length to platelets of 50 nm in diameter, allowed a comparative study of their respective thermal evolutions as alumina precursors. Static thermal treatments of boehmite nanocrystals at 600, 1000 and 1200 °C and a dynamic, in situ synchrotron study between 100 and 1000 °C revealed that original boehmite microstructures, i.e. size and shape of the nanoparticles, were kept not only in γ-Al 2 O 3 but also in transitional aluminas up to 1000 °C. Specifically, at that temperature, acicular samples presented θ-Al 2 O 3 structure, while in pl…
The influence of the nature of the surface oxide on the adhesive fracture energy of aluminium-bonded joints as measured by T-peel tests
2008
Abstract Modification of aluminium alloy substrates microstructure and morphology by depositing new oxide layers on top of the metal surface has been investigated, with the aim of improving adhesion. The effect of treating the metal with boiling water or immersing it in a cerate bath has been studied by means of electron microscopy, contact angle measurements and peeling tests. The formation of pseudoboehmite layers or cerium conversion coatings both led to an increase in joint's adhesive fracture energy and more durable adhesive bonds with respect to joints obtained with “mechanically grinded only” substrates. Differences in the performance of the bonded joints has been discussed in terms …
The Relevance of Kneading and Extrusion Parameters in the Manufacture of Active Porous Aluminas from Pseudoboehmites
1987
In order to study the effect-on crushing strength, attrition resistance, specific pore volume, and pore volume distribution of extrudates-of kneading and extrusion parameters in the manufacture of active porous aluminas, a commercial pseudoboehmite (Pural SB from Condea Chemie, Brunsbuttel, FRG) was employed. A minimum kneading torque was required to prepare an extrudable paste, predetermined by extrusion conditions. The torque had an upper limit with respect to certain extrudate properties. The amount of water and the concentration of nitric acid as binder solutions were found to have a decisive bearing on the mechanical properties and the distribution of the pore volume. Crushing strength…
Enhancement of SOD activity in boehmite supported nanoreceptors
2018
The binuclear Cu2+ complex of a pyridinophane polyamine ligand ranking amongst the fastest SOD mimetics so far reported displays a remarkable SOD activity enhancement when grafted to the surface of boehmite (γ-AlO(OH)) nanoparticles (BNPs).
Improvement of boehmite nanoparticles' aqueous dispersability by controlling their size, shape and crystallinity
2014
In this work, results on the control of size, shape, crystallinity and aqueous dispersability of boehmite prepared by a hydrothermal process are reported. The two step synthetic procedure entailed the precipitation of a xerogel by adding NaOH until pH 10 to a solution of aluminum nitrate at 100 °C without or with additives such as tartaric acid and maltitol, and a subsequent hydrothermal treatment at 150 and 200 °C for different periods of time. The final materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and elemental analysis. The stability and other characteristics of the boehmite nanoparticle aqueous dispersions were determined by measuring t…
Naphthalene-containing polyamines supported in nanosized boehmite particles
2007
Boehmite nanoparticles with covalently linked polyamine chains functionalized with naphthalene fluorophores have been prepared and characterized. The characterization of the materials by elemental microanalysis, X-ray powder diffraction, MAS 29Si NMR and electron microscopy unambiguously prove that the covalent anchorage had occurred. Steady-state fluorescence emission studies show that the luminescent properties of the modified nanoparticles are sensitive to changes in concentration of hydrogen ions, metal ions and anionic nucleotides such as ATP. The behaviour of the attached materials in aqueous solution is parallel to the behaviour of the single fluorophoric polyamines. Comparisons are …
Tuning the size and shape of nano-boehmites by a free-additive hydrothermal method
2015
A synthetic procedure allowing the control of boehmite micro and nanoparticles is presented. The proposed hydrothermal synthetic procedure is based on the control of three reaction parameters, the pH and temperature of precipitation of xerogels and the water/xerogel ratio for the hydrothermal process, carried out at 200 °C for 48 h. Results obtained by measurements on transmission electron microscopy (TEM) images indicate that at pH 5 micro or nanorods of controlled length between ca. 300 and 50 nm were obtained depending on the temperature of precipitation of the xerogel (25 or 100 °C) and the water/xerogel ratio used (1/1, 6/1, 15/1). On the contrary, at pH 10, nanoplatelets with major ba…
Grafted squaramide monoamine nanoparticles as simple systems for sulfate recognition in pure water.
2012
New simple systems formed by a chain containing a squaramide function and a quaternised amine group attached to boehmite or silica-coated boehmite nanoparticles are able to discriminate anions in pure water.
Crystalline microstructure of boehmites studied by multi-peak analysis of powder X-ray diffraction patterns
2017
Nanocrystalline boehmite (gamma-aluminium-oxyhydroxide) is a material of industrial importance, the functionality of which follows from its crystalline microstructure. A procedure for preparing boehmite nanoparticles, comprising the formation of a precipitate by the alkalization of an aqueous solution of aluminium nitrate and subsequent hydrothermal aging, was previously elaborated. The application of an additive (maltitol or tartaric acid) to control the sizes and shapes of crystallites in the produced polycrystalline powder of boehmite was developed. The aim of this work is a study of the effect of the hydrothermal treatment time on nanocrystalline characteristics of boehmite, both in abs…