Search results for "Brittleness"

Fabric control on strain and rupture of heterogeneous shale samples by using a non-conventional mechanical test

2004

Abstract This work was a part of the preliminary stage of the ANDRA project on a deep-seated research laboratory for the feasibility study of long-term radioactive waste storage in the Callovo–Oxfordian argillites of the Eastern part of the Paris Basin. These rocks are bedded, their density is about 2.4, and they contain an average of 30% carbonates and 25% quartz. Thick (5 mm) sections from cores were put through a non-conventional device called CGI testcell (CGI: Centre de Geologie de l'Ingenieur, i.e. Engineering Geology Centre). The aim of this versatile device is to achieve plane deformation tests under compressive uniaxial loading together with controlled temperature and humidity cond…

The transition from single layer to foliation boudinage: A dynamic modelling approach

2012

Abstract Foliation boudinage is a deflection of foliation in the vicinity of a central discontinuity in foliated rocks, mostly filled with vein material. It shows evidence for brittle deformation and void-opening during ductile flow. We used a two-dimensional visco-elastic spring model based on a discrete element approach to study the dynamic development of foliation boudinage and the behaviour of anisotropic visco-elastic material deformed under pure shear conditions. The anisotropies are set by defining rheological heterogeneities in the models with (1) a single layer in a weaker matrix; (2) multi-layers with different elastic properties and (3) random-distributed “micas”, rows of horizon…

Fracture mechanics of snow avalanches.

2001

Dense snow avalanches are analyzed by modeling the snow slab as an elastic and brittle plate, attached by static friction to the underlying ground. The grade of heterogeneity in the local fracture (slip) thresholds, and the ratio of the average substrate slip threshold to the average slab fracture threshold, are the decisive parameters for avalanche dynamics. For a strong pack of snow there appears a stable precursor of local slips when the frictional contacts are weakened (equivalent to rising temperature), which eventually trigger a catastrophic crack growth that suddenly releases the entire slab. In the opposite limit of very high slip thresholds, the slab simply melts when the temperatu…

Effect of Water on the Mechanical Behaviour of Extruded Flat Bread

1997

Abstract The effect of water on the mechanical properties of extruded breads was studied, at room temperature. As the moisture content was increased from 6 to 9% moisture, the resistance to fracture (compression tests) or rupture (tensile tests) was improved. Above this moisture range, plasticisation by water was the dominant phenomenon. The brittle to ductile transition was observed to occur within a moisture content range from 9 to 13·7% (w/w). The influence of water on the crispness of extruded bread, evaluated with sensory evaluation, is also described.

Fracture and Fatigue of Travelling Plates

2013

In this chapter, problems of fracture and stability of a moving plate, travelling in a system of rollers at a constant velocity, are studied. It is known that in the manufacturing process, there may occur many kinds of defects in the paper web, such as edge cracks and blister and fiber cuts. Our aim is to tackle this problem and analyse theoretically how the defects change the behaviour. We will use the model of a thin elastic plate made of brittle material. A plate with initial cracks is studied, subjected to constant tension and cyclic tension. As a result, we will show how to find safe parameter ranges of transport velocities and in-plane tensions when fracture, stability and constraints…

Fracture of a Brittle Membrane

1997

Some Optimization Problems

2013

In this chapter, the problems of safety analysis and optimization of a moving elastic plate travelling between two rollers at a constant axial velocity are considered. We will use a model of a thin elastic plate subjected to bending and in-plane tension (distributed membrane forces). We will study transverse buckling (divergence) of the plate and its brittle and fatigue fracture caused by fatigue crack growth under cyclic in-plane tension (loading). Our aim is to find the safe ranges of velocities of an axially moving plate analytically under the constraints of longevity and stability. In the end of this chapter, the expressions for critical buckling velocity and the number of cycles before…

Bioresorbable β-TCP-FeAg nanocomposites for load bearing bone implants: High pressure processing, properties and cell compatibility.

2017

In this paper, the processing and properties of iron-toughened bioresorbable β-tricalcium phosphate (β-TCP) nanocomposites are reported. β-TCP is chemically similar to bone mineral and thus a good candidate material for bioresorbable bone healing devices; however intrinsic brittleness and low bending strength make it unsuitable for use in load-bearing sites. Near fully dense β-TCP-matrix nanocomposites containing 30vol% Fe, with and without addition of silver, were produced employing high energy attrition milling of powders followed by high pressure consolidation/cold sintering at 2.5GPa. In order to increase pure iron's corrosion rate, 10 to 30vol% silver were added to the metal phase. The…

Preparation of synthetic sandstones with variable cementation for studying the physical properties of granular rocks

1997

In this article, we report a new set of procedures to fabricate synthetic analogues of granular rocks. These procedures permit accurate control of the most important structural parameters (i.e., grain size, porosity, cement content). We were thus able to prepare two varieties of synthetic sandstones in which only the cement content significantly varied. Our procedures were also particularly successful in producing materials that were very similar to natural rocks. To demonstrate this similarity, we compared the microstructure, the mechanical properties (i.e., strength, elastic moduli) and the mechanical behaviour (i.e., brittle or ductile) of the synthetic materials to those of various natu…

Non-exponential relaxation in disordered materials: Phenomenological correlations and spectrally selective experiments

1998

Abstract In most glass-forming materials external perturbations are relaxed in a non-exponential fashion. It is shown that the degree of non-exponentiality is phenomenologically correlated with the departure from simple thermally activated behavior as measured by the fragility index m. In model glass formers such as the Ge-As-Se ternary alloy, and to some degree for amorphous materials in general, the correlations with these properties are observed also for other characteristic features. These include the specific heat step and the aging kinetics in the glass transformation range. While phenomenological correlations have proven very useful for rationalizing the properties of many glass form…