Search results for "CFD"

Thermofluid-dynamic assessment of the EU-DEMO divertor single-circuit cooling option

2023

Until 2019, the thermo-hydraulic development of the EU-DEMO divertor was based on the “double-circuit” concept, in which two independent cooling circuits served by two different Primary Heat Transfer Systems were used to cool the Plasma-Facing Components (PFC) and the Cassette Body (CB). During the Divertor Final Design Review Meeting, held in May 2020, the possibility to adopt a single cooling circuit to serve both components was suggested. This new cooling circuit was originally conceived with the aim of simplifying remote maintenance, with potential benefits for some aspects of safety and balance of plant design and integration. During the years from 2020 to 2022, in the fram…

Integral approach to the safety design of the EU-DEMO Helium-Cooled Pebble Beds with reference to the associated relevant systems

2020

Beam test results of IHEP-NDL Low Gain Avalanche Detectors(LGAD)

2020

A High-Granularity Timing Detector (HGTD) is proposed based on the Low-Gain Avalanche Detector (LGAD) for the ATLAS experiment to satisfy the time resolution requirement for the up-coming High Luminosity at LHC (HL-LHC). We report on beam test results for two proto-types LGADs (BV60 and BV170) developed for the HGTD. Such modules were manufactured by the Institute of High Energy Physics (IHEP) of Chinese Academy of Sciences (CAS) collaborated with Novel Device Laboratory (NDL) of the Beijing Normal University. The beam tests were performed with 5 GeV electron beam at DESY. The timing performance of the LGADs was compared to a trigger counter consisting of a quartz bar coupled to a SiPM read…

Coupled hydraulic and electronic regulation of cross-flow turbines in hydraulic plants

2017

The potential benefit of coupling hydraulic and electronic regulation to maximize the energy production of a cross-flow turbine in hydraulic plants is analyzed and computed with reference to a specific case. Design criteria of the cross-flow turbine inside hydraulic plants are first summarized, along with the use of hydraulic regulation in the case of constant water head and variable discharge. Optimal turbine impeller rotational speed is derived, and traditional as well as innovative systems for electrical regulation are presented. A case study is analyzed to evaluate the potential energy production according to the expected monthly mean flow distribution and two possible choices: CFT1 wit…

A preliminary method for the numerical prediction of the behavior of air bubbles in the design of Air Cavity Ships

2016

Air-cavity ships (ACS) are advanced marine vehicles that use air injection under hull to improve the vessel’s hydrodynamic characteristics. Although the concept of drag reduction by supplying gas under the ship’s bottom was proposed in the 19th century by Froude and Laval, at this time there are not many systematic studies on this subject. This paper is a preliminary work with the purpose of being a basic tool for the design of the ACS with computational fluid dynamic methods. The study aims to conduct a series of computational tests to compare the numerical models of bubble with experimental data. The first step of this study was to investigate the behavior of free bubble in water, conside…

Transient Modelling of Thermal Conditions in Test Buildings Including Radiation

2015

Abstract To increase the energy efficiency of buildings in Latvia's climate a comparative study with five experimental test buildings have been set up in Riga, Latvia. Different thermo physical quantities such as temperature, humidity, air velocity, etc. were monitored to better understand different behaviour of the building envelope. This gives an excellent validation possibility for the CFD model that in future could predict conditions in buildings with different envelopes. Previously a stationary model and transient model were considered without taking into consideration the thermal radiation. This study continues the previous work that was done and proposes a transient model which takes…

Sailing dinghy hydrodynamic resistance by experimental and numerical assessments

2020

Abstract Hull forms of high-performance sailing dinghies are very interesting for yacht designers. After a long period in which the attention has been focused on one-design boats, in recent years a few exciting restricted classes such as International Moth, International 14′, 18’ Skiff and Class A catamaran become recognized in several countries and led to interesting advances in high-performance yacht design. “1001VELAcup R3” class is two people racing dinghy designed according to a box rule with limitation on LOA and Bmax and total sail area. The boats must be designed and built by students of European Universities and race yearly in Italy. This paper focuses on two best-ranked boats “LED…

Slotted Blades Savonius Wind Turbine Analysis by CFD

2013

In this paper a new bucket configuration for a Savonius wind generator is proposed. Numerical analyses are performed to estimate the performances of the proposed configuration by means of the commercial code COMSOL Multiphysics® with respect to Savonius wind turbine with overlap only. Parametric analyses are performed, for a fixed overlap ratio, by varying the slot position; the results show that for slot positioned near the blade root, the Savonius rotor improves performances at low tip speed ratio, evidencing a better starting torque. This circumstance is confirmed by static analyses performed on the slotted blades in order to investigate the starting characteristic of the proposed Savoni…

Coupled Hydraulic and Electronic Regulation for Banki Turbines

2016

Abstract The potential benefit of coupling hydraulic and electronic regulation to maximize the energy production of a Bank turbine in hydraulic plants is analyzed and computed with reference to a specific case. Design criteria of the Banki turbine inside hydraulic plants are first summarized, along with the use of hydraulic regulation in the case of constant water head and variable discharge at the end of aqueducts feeding water distribution systems. Optimal turbine impeller rotational speed is derived and traditional, as well as innovative systems for electricity production according to controlled rotational speed of the generator are presented. The study case at the purification plant nam…

CFD simulation of channels for direct and reverse electrodialysis

2012

Flows within very thin channels, typically filled with spacers, can be often encountered in many processes such as electrodialysis (ED) and reverse electrodialysis (RED). Although the ED and the RED processes have been studied for a long time, the optimization of the fluid dynamics within the channels is still an open problem. In the present work, realized within the EU-FP7 funded REAPower project, computational fluid dynamics simulations were carried out in order to predict the fluid flow field inside a single ED/RED channel. Some different configurations were tested which includes: an empty channel, a channel provided with a spacer, and a channel filled with a purposely manufactured fiber…