Search results for "CITIES"

showing 10 items of 447 documents

Hydrolysis rates, methane production and nitrogen solubilisation of grey waste components during anaerobic degradation.

2005

Abstract Municipal grey waste (i.e. the remaining fraction in municipal waste management systems in which putrescibles (biowaste) and other recyclables (paper, metals, glass) are source-segregated) was manually sorted into six main fractions on the basis of composition and also separated by sieving (100 mm mesh size) into two fractions, oversized and undersized, respectively. In practice, in waste management plant the oversized fraction is (or will be) used to produce refuse-derived fuel and the undersized landfilled after biological stabilisation. The methane yields and nitrogen solubilisation of the grey waste and the different fractions (all studied samples were first milled to 5 mm part…

Environmental EngineeringMunicipal solid wasteManufactured MaterialsNitrogenBioengineeringFraction (chemistry)GarbageMethanechemistry.chemical_compoundBacteria AnaerobicCitiesWaste Management and DisposalPollutantWaste ProductsWaste managementRenewable Energy Sustainability and the EnvironmentHydrolysiscardboardGeneral MedicineBiodegradable wasteBiodegradationTotal dissolved solidsRefuse DisposalKineticsBiodegradation EnvironmentalchemistrySolubilityvisual_artvisual_art.visual_art_mediumMethaneFiltrationBioresource technology
researchProduct

Greening MSW management systems by saving footprint: The contribution of the waste transportation.

2018

Abstract Municipal solid waste (MSW) management constitutes a highly challenging issue to cope with in order of moving towards more sustainable urban policies. Despite new Standards call for recycling and reusing materials contained in the urban waste, several municipalities still use landfilling as a waste disposal method. Other than the environmental pressure exerted by these plants, waste transportation from the collection points to the landfill needs a specific attention to correctly assess the whole burden of the waste management systems. In this paper, the Ecological Footprint (EF) indicator is applied to the actual MSW of the city of Palermo (Sicily). Results show that the effects pr…

Environmental EngineeringMunicipal solid wasteTransportation vehicle020209 energyTransportation02 engineering and technology010501 environmental sciencesManagement Monitoring Policy and LawReuseSolid Waste01 natural sciencesWaste management systemFootprintWaste Management0202 electrical engineering electronic engineering information engineeringEcological footprintEnvironmental sustainabilityCitiesWaste Management and DisposalSicily0105 earth and related environmental sciencesSettore ING-IND/11 - Fisica Tecnica AmbientaleEcological footprintWaste managementMunicipal solid wasteGeneral MedicineRefuse DisposalSustainabilityManagement systemEnvironmental scienceLandfillWaste disposalJournal of environmental management
researchProduct

Efficiency of wastewater treatment facilities: The influence of scale economies.

2018

The water cycle, from catchment to discharge, is a sector that involves an important investment and operation and maintenance costs. In particular, sewage treatment is a challenge for governments because they are having to consider economic, environmental, and social aspects. Within the European Union, implementation of Directive 91/271/EEC is responsible for the location of wastewater treatment facilities in the territory, due to the requirement that all urban areas must have this infrastructure to reduce the environmental impact of treated water in water bodies. Different sizes of municipalities affect the design of each wastewater treatment plant (WWTP) and cause variations in the operat…

Environmental EngineeringNatural resource economics020209 energy02 engineering and technologyEfficiency010501 environmental sciencesManagement Monitoring Policy and LawEnvironmentWastewater01 natural sciencesWaste Disposal FluidWater Purification0202 electrical engineering electronic engineering information engineeringmedia_common.cataloged_instanceEnvironmental impact assessmentEuropean unionCitiesWaste Management and Disposal0105 earth and related environmental sciencesmedia_commonScope (project management)General MedicineDirectiveInvestment (macroeconomics)Economies of scaleSewage treatmentBusinessPopulation equivalentJournal of environmental management
researchProduct

The distribution of phthalate esters in indoor dust of Palermo (Italy).

2013

In this work, phthalic acid esters (PAEs): dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, and di-n-octyl phthalate in indoor dust (used as passive sampler) were investigated. The settled dust samples were collected from thirteen indoor environments from Palermo city. A fast and simple method using Soxhlet and GC–MS analysis has been optimized to identify and quantify the phthalates. Total phthalates concentrations in indoor dusts ranged from 269 to 4,831 mg/kg d.w. (d.w. = dry weight). The data show a linear correlation between total PAEs concentration and a single compound content, with the exclusion of the two …

Environmental EngineeringPhthalic AcidsIndoor dust Phthalates esters GC–MS Contaminants ItalyDiethyl phthalateGas Chromatography-Mass SpectrometrySettore CHIM/12 - Chimica Dell'Ambiente E Dei Beni Culturalichemistry.chemical_compoundGeochemistry and PetrologyEnvironmental Science(all)Benzyl butyl phthalateContaminantsEnvironmental ChemistryGC–MSSettore CHIM/01 - Chimica AnaliticaPhthalates estersCitiesGeneral Environmental ScienceWater Science and TechnologyOriginal PaperAir PollutantsChemistryPhthalateDustEstersGeneral MedicineContaminationPhthalic acidIndoor dustItalyEnvironmental chemistryAir Pollution IndoorLinear correlationGas chromatography–mass spectrometryDimethyl phthalateIndoor dustPhthalates estersGC–MSContaminantsItalyEnvironmental Monitoring
researchProduct

Methane recovery efficiency in a submerged anaerobic membrane bioreactor (SAnMBR) treating sulphate-rich urban wastewater: Evaluation of methane loss…

2012

The present paper presents a submerged anaerobic membrane bioreactor (SAnMBR) as a sustainable approach for urban wastewater treatment at 33 and 20 C, since greenhouse gas emissions are reduced and energy recovery is enhanced. Compared to other anaerobic systems, such as UASB reactors, the membrane technology allows the use of biogas-assisted mixing which enhances the methane stripping from the liquid phase bulk. The methane saturation index obtained for the whole period (1.00 ± 0.04) evidenced that the equilibrium condition was reached and the methane loss with the effluent was reduced. The methane recovery efficiency obtained at 20 C (53.6%) was slightly lower than at 33 C (57.4%) due to …

Environmental EngineeringPilot ProjectsBioengineeringWaste Disposal FluidMethaneWater PurificationMembrane technologychemistry.chemical_compoundBioreactorsAnaerobiosisCitiesWaste Management and DisposalEffluentTECNOLOGIA DEL MEDIO AMBIENTEBiological Oxygen Demand AnalysisEnergy recoverySulfatesRenewable Energy Sustainability and the EnvironmentUrban wastewaterTemperatureEnvironmental engineeringMethane saturation indexMembranes ArtificialGeneral MedicineSubmerged anaerobic membrane bioreactor (SAnMBR)chemistryWastewaterBiofuelsGreenhouse gasDissolved methaneSewage treatmentSulphate-rich wastewaterMethaneAnaerobic exerciseBioresource Technology
researchProduct

Reliable method for assessing the COD mass balance of a submerged anaerobic membrane bioreactor (SAMBR) treating sulphate-rich municipal wastewater

2012

The anaerobic treatment of sulphate-rich wastewater causes sulphate reducing bacteria (SRB) and methanogenic archaea (MA) to compete for the available substrate. The outcome is lower methane yield coefficient and, therefore, a reduction in the energy recovery potential of the anaerobic treatment. Moreover, in order to assess the overall chemical oxygen demand (COD) balance, it is necessary to determine how much dissolved CH4 is lost in the effluent. The aim of this study is to develop a detailed and reliable method for assessing the COD mass balance and, thereby, to establish a more precise methane yield coefficient for anaerobic systems treating sulphate-rich wastewaters. A submerged anaer…

Environmental EngineeringPilot ProjectsWaste Disposal FluidWater PurificationBioreactorsBiogasBioreactorAnaerobiosisCitiesSulfate-reducing bacteriaEffluentIn Situ Hybridization FluorescenceWater Science and TechnologyBiological Oxygen Demand AnalysisBacteriaSewageSulfatesChemistryChemical oxygen demandEnvironmental engineeringReproducibility of ResultsMembranes ArtificialPulp and paper industryAnaerobic digestionWaste treatmentWastewaterSpainBiofuelsMethaneOxidation-ReductionWater Science and Technology
researchProduct

Impact of rainfall data resolution in time and space on the urban flooding evaluation.

2013

Climate change and modification of the urban environment increase the frequency and the negative effects of flooding, increasing the interest of researchers and practitioners in this topic. Usually, flood frequency analysis in urban areas is indirectly carried out by adopting advanced hydraulic models to simulate long historical rainfall series or design storms. However, their results are affected by a level of uncertainty which has been extensively investigated in recent years. A major source of uncertainty inherent to hydraulic model results is linked to the imperfect knowledge of the rainfall input data both in time and space. Several studies show that hydrological modelling in urban are…

Environmental EngineeringTime FactorsFlood mythSpacetimeMeteorologyGeographyHydrological modellingClimate ChangeRainFlooding (psychology)UncertaintyClimate changeStormModels TheoreticalFloodsItalyAdded valueCitiesGLUEWater Science and TechnologyEnvironmental MonitoringWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

Real-time parameter estimation of Zika outbreaks using model averaging

2017

SUMMARYEarly prediction of the final size of any epidemic and in particular for Zika disease outbreaks can be useful for health authorities in order to plan the response to the outbreak. The Richards model is often been used to estimate epidemiological parameters for arboviral diseases based on the reported cumulative cases in single- and multi-wave outbreaks. However, other non-linear models can also fit the data as well. Typically, one follows the so called post selection estimation procedure, i.e., selects the best fitting model out of the set of candidate models and ignores the model uncertainty in both estimation and inference since these procedures are based on a single model. In this…

EpidemiologyComputer science030231 tropical medicineEPIDEMICSInferenceZika virusDisease OutbreaksSet (abstract data type)03 medical and health sciences0302 clinical medicineZIKA VIRUS MODEL AVERAGING REAL-TIME PREDICTIONS EPIDEMICS COLOMBIAStatisticsHumans030212 general & internal medicineCitiesSelection (genetic algorithm)Weibull distributionEstimationMODEL AVERAGINGTime parameterbiologyZika Virus InfectionIncidenceOutbreakModels Theoreticalbiology.organism_classificationOriginal PapersREAL-TIME PREDICTIONSInfectious DiseasesNonlinear DynamicsZIKA VIRUSCOLOMBIA
researchProduct

Evaluating the citywide Edinburgh 20mph speed limit intervention effects on traffic speed and volume: A pre-post observational evaluation.

2021

Objectives Traffic speed is important to public health as it is a major contributory factor to collision risk and casualty severity. 20mph (32km/h) speed limit interventions are an increasingly common approach to address this transport and health challenge, but a more developed evidence base is needed to understand their effects. This study describes the changes in traffic speed and traffic volume in the City of Edinburgh, pre- and 12 months post-implementation of phased city-wide 20mph speed limits from 2016–2018. Methods The City of Edinburgh Council collected speed and volume data across one full week (24 hours a day) pre- and post-20mph speed limits for 66 streets. The pre- and post-sp…

EpidemiologyGeography Planning and DevelopmentSocial SciencesTransportation/dk/atira/pure/core/keywords/exercise_nutrition_and_health_sciences20mph speed limitsCognitionAccident PreventionRA0421RA0421 Public health. Hygiene. Preventive Medicine/dk/atira/pure/subjectarea/asjc/3300/3313Medicine and Health SciencesPsychologyPublic and Occupational Health/dk/atira/pure/sustainabledevelopmentgoals/industry_innovation_and_infrastructureEvaluationGeographic AreasMultidisciplinaryGeographyHealth PolicyTraumatic Injury Risk FactorsQFOS: Social sciencesRAccidents Traffic/dk/atira/pure/subjectarea/asjc/2700/27393rd-DASSPEED LIMITSResearch AssessmentTransportation InfrastructureSDG 11 - Sustainable Cities and CommunitiesTreatment Outcome/dk/atira/pure/subjectarea/asjc/3300/3322Evaluation Studies as TopicRoad Traffic Collisions/dk/atira/pure/sustainabledevelopmentgoals/good_health_and_well_beingEngineering and TechnologyMedicinePublic HealthSafetyResearch ArticleUrban AreasAutomobile DrivingScienceDecision MakingHuman GeographyResearch and Analysis MethodsCivil EngineeringUrban Geography/dk/atira/pure/sustainabledevelopmentgoals/sustainable_cities_and_communitiesSDG 3 - Good Health and Well-beingHumansUrban InfrastructureCitiespre-post observational evaluationPublic Health Environmental and Occupational HealthCognitive PsychologyBiology and Life Sciences/dk/atira/pure/subjectarea/asjc/3300/3305FOS: Engineering and technologyRoadsUrban StudiesLogistic ModelsScotlandMedical Risk FactorstransportEarth SciencesCognitive Science20mphSDG 9 - Industry Innovation and InfrastructureSPS Exercise Nutrition and Health SciencesNeuroscience
researchProduct

Polystyrene nanoparticles in the presence of (ethylene oxide)13(propylene oxide)30(ethylene oxide)13, N,N-dimethyloctylamine-N-oxide and their mixtur…

2008

Polystyrene nanoparticles were synthesized by emulsion polymerization of styrene. They were functionalized using the conventional surfactant N,N-dimethyloctylamine-N-oxide (ODAO), the tri-block copolymer (ethylene oxide)13(propylene oxide)30(ethylene oxide)13 (L64) and their mixtures. To this purpose, dynamic light scattering and calorimetric experiments were carried out and provided information consistent to each other. The L64 adsorption is Langmuir-type in the copolymer dilute regime and generates complex structures at larger concentrations. In the region where ODAO is in the unimeric state, the adsorption process is cooperative leading to hemi-micelle formation at the polystyrene nanopa…

Ethylene OxideMaterials scienceLightSurface PropertiesOxideGeneral Physics and AstronomyEmulsion polymerizationCalorimetryTRIBLOCK COPOLYMERSStyrenechemistry.chemical_compoundDynamic light scatteringAQUEOUS-SOLUTIONSPolymer chemistryCopolymerScattering RadiationPropylene oxideSURFACTANTSPhysical and Theoretical ChemistryStyreneEthylene oxideLAPONITE CLAYWaterOxidesOctanesHEAT-CAPACITIESSolutionsBLOCK-COPOLYMERSLATEXchemistryChemical engineeringNanoparticlesPolystyrenesMASS-ACTION MODELTHERMODYNAMIC PROPERTIESAdsorptionPolystyrenePhys. Chem. Chem. Phys.
researchProduct