Search results for "CN"
showing 10 items of 9699 documents
Biorefinery process for hydrothermal liquefaction of microalgae powered by a concentrating solar plant: A conceptual study
2017
Abstract A conceptual analysis of coupling a concentrating solar power plant with a biorefinery process consisting in the hydrothermal liquefaction (HTL) of microalgae to biocrude was performed. The configuration of the CSP-HTL plant was designed to allow continuous operation considering 10 kT of microalgae processed each year using, for the first time, a ternary nitrate mixture as heat transfer fluid and storage medium in the temperature range of 340–410 °C. With adopted models, the capital and operating costs of the solar plant marginally affect the minimum fuel selling prize (MFSP) of biocrude that decreases with the size of the solar field and of the thermal storage system provided that…
Long-term performance and life cycle assessment of energy piles in three different climatic conditions
2020
Abstract The main purpose behind the use of energy piles is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings in an efficient and environment-friendly manner. However, the long-term performance of energy piles in different climatic conditions, along with their actual environmental impacts, has not been fully assessed. In this paper, the results of a finite element model taking into consideration the heating and cooling demands of a reference building, and the intermittent operation of a ground source heat pump, are revealed to examine the long-term performance of energy piles. Furthermore, a life cycle assessment model is implemented to com…
Analysis of some renewable energy uses and demand side measures for hotels on small Mediterranean islands: A case study
2018
Abstract Tourist activity strongly influences the energy consumption and the overall load profile of communities with isolated energy systems. One example is hotel sectors on small islands that are not connected to mainland energy distribution grids. The use of solar energy systems could be a smart option for reducing energy consumption and tackling seasonal fluctuation. The operation of a weak and isolated electric grid requires attention to the management of power profiles in very short time frames. Energy storage (thermal or electric), as well as building automation control technologies, can be utilised for these aims. In this context, the present paper illustrates a study conducted at a…
A solar assisted seasonal borehole thermal energy system for a non-residential building in the Mediterranean area
2019
Abstract Solar heating and cooling systems are reliable and feasible solutions among renewable energy technologies. Indeed, solar thermal devices help reduce primary energy consumption and can reduce electricity demand, thus representing one of the best options for satisfying heating and/or cooling energy supply. The Borehole Thermal Energy Storage (BTES) represents one of the best promising option among the various storage technologies, because the size of the storage can be easily extended by drilling additional boreholes and simply connecting the pipes to the existing boreholes; the overall energy efficiency of this system is about 40–60%. In this paper, the authors present an applicatio…
Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes
2019
Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…
Impact Analysis Using Life Cycle Assessment of Asphalt Production from Primary Data
2020
Road construction and maintenance have a great impact on the environment, owing to the huge volumes of resources involved. Consequently, current production procedures and technologies must be properly investigated, for identifying and quantifying the life cycle environmental impacts produced. In this paper, primary data, i.e., site-specific data directly collected or measured on a reference plant, are analyzed for calculating the impact of the production of a hot mix asphalt. The analysis is performed in a from &ldquo
Combined gasification-oxidation system for waste treatment with supercritical water: Lca and performance analysis
2020
In this study the environmental performance of a first-of-its-kind integrated process based on supercritical water gasification and oxidation (SCW-GcO), was evaluated using life cycle assessment (LCA). The process was applied to the treatment of carbon black and used oil as model wastes. Mass and energy balances were performed using Aspen Plus, and the environmental assessment was carried out through SimaPro. A “from cradle to grave” approach was chosen for the analysis, considering impact categories such as climate change, ozone depletion, human toxicity, particulate matter, land use, resource depletion, and other relevant indicators. The environmental profile of the SCW-GcO process was co…
From lab to industry: Scaling up green geopolymeric mortars manufacturing towards circular economy
2021
Abstract Construction is nowadays considered an extremely energy intensive industry and one of the main sources of environmental pollution in the world. Therefore, the research and the development of novel energy-saving manufacturing processes and sustainable construction materials is more than ever urgent and challenging. This paper aims at identifying the industrial process for the production of novel geopolymers to be used as a greener substitute for cement, especially the Portland one, widely used for structural applications to significantly reduce the environmental impact of the construction industry. Here, the materials sustainability and the manufacturing process are improved by valo…
Energy and economic analysis of air-to-air heat pumps as an alternative to domestic gas boiler heating systems in the South of Italy
2019
Abstract According to the electricity tariff recently issued by the Italian government for the domestic heating systems fed with heat pumps (HP), an energy and economic analysis was carried out with the aim of investigating the effectiveness of the air-to-air heat pump systems (HPS) as an alternative to the traditional heating using domestic gas boilers systems (GBS). For the purpose of this study, the apartments of three residential buildings were examined. The hourly heating loads were calculated with the ASHRAE radiant time series and the coefficient of performance (COP) of the HPs was evaluated for each operating condition. The costs for the heating system installation and electricity a…
Five-years-long effects of the Italian policies for photovoltaics on the energy demand coverage of grid-connected PV systems installed in urban conte…
2016
Abstract The paper examines the responsiveness of the electricity demand coverage in urban contexts to the changes in the Italian policies for PV systems. The morphological configuration of building roofs according to the number of covered flats, annual data of PV generation and electricity consumptions were considered in the transition from the feed-in tariff (FIT) mechanism to the tax credits scheme currently in force. With the aim of assessing the changes over time in three representative cities, the fluctuations both in the premiums for the produced electricity and the tax credits applied to the PV system costs were observed from July 2010 to February 2016. Furthermore, the main time-va…