Search results for "CO2"
showing 10 items of 402 documents
Mass Transport Analysis of the Enhanced Buffer Capacity of the Bicarbonate-CO2 Buffer in a Phase-Heterogenous System: Physiological and Pharmaceutica…
2018
The bicarbonate buffer capacity is usually considered in a phase-homogeneous system, at equilibrium, with no CO2 transfer between the liquid buffer phase and another phase. However, typically, an in vitro bicarbonate buffer-based system is a phase-heterogeneous system, as it entails continuously sparging (bubbling) the dissolution medium with CO2 in a gas mixture, at constant ratio, to maintain a constant partial pressure of CO2 (g) and CO2(aq) molarity at a prescribed value, with CO2 diffusing freely between the gas and the aqueous phases. The human gastrointestinal tract is also a phase-heterogeneous system, with CO2 diffusing across the mucosal membrane into the mesenteric arterial blood…
An Investigation into the Stability of Graphitic C 3 N 4 as a Photocatalyst for CO 2 Reduction
2018
The increasing CO 2 concentration in the atmosphere exerts a significant influence on global warming and climate change. The capture and utilization of CO 2 by conversion to useful products is an area of active research. In this work, the photodriven reduction of CO 2 was investigated using graphitic carbon nitride (g-C 3 N 4 ) as a potential photocatalyst. The photocatalytic reduction of CO 2 was investigated with g-C 3 N 4 powder immobilized on a glass support in a batch gas-phase photoreactor. The experiments were carried out under UV-vis irradiation at 70 °C and an initial pressure of 2.5 bar. The only gas-phase product detected during the irradiation of the g-C 3 N 4 in the presence of…
CO2 to Liquid Fuels: Photocatalytic Conversion in a Continuous Membrane Reactor
2018
The photocatalytic reduction of CO, into value-added chemicals using sunlight is a promising approach to promote energy-bearing products, mitigating the adverse effects of anthropogenic CO2 emissions. In this work, exfoliated C3N4 was incorporated into Nafion matrix and used in a continuous photocatalytic reactor for converting CO2 into liquid fuels. Comprehensive structural and morphological diffuse reflectance spectroscopy (DRS), FT-IR, ATR-IR, and SEM measurements were performed for C3N4-loaded Nafion membrane and then compared with those of a Nafion membrane without any catalyst. The synergic effect of C3N4 organic catalyst embedded in a Nafion dense matrix and a continuous operating mo…
Structural and CO [sub] 2 capture properties of ethylenediamine-modified HKUST-1 metal-organic framework
2020
The high structural and compositional flexibility of metal–organic frameworks (MOFs) shows their great potential for CO2 capture and utilization in accordance with the environmental guidelines of low-carbon technology developments. HKUST-1 as one of the most intensively studied representatives of MOFs for such purposes excels because of its simplicity of production and high ability to tune its intrinsic properties by various functionalization processes. In the present work, ethylenediamine functionalization was performed for the first time in order to thoroughly investigate the amine sorption sites’ impact on the CO2 capture performance of HKUST-1. The placement of ethylenediamine moieties …
PBI mixed matrix hollow fiber membrane: Influence of ZIF-8 filler over H2/CO2 separation performance at high temperature and pressure
2020
High performance and commercially attractive mixed-matrix membranes were developed for H2/CO2 separation via a scalable hollow fiber spinning process. Thin (~300 nm) and defect-free selective layers were successfully created with a uniform distribution of the nanosized (~60 nm) zeolitic-imidazole framework (ZIF-8) filler within the polymer (polybenzimidazole, PBI) matrix. These membranes were able to operate at high temperature (150 °C) and pressure (up to 30 bar) process conditions required in treatment of pre-combustion and syngas process gas streams. Compared with neat PBI hollow fibers, filler incorporation into the polymer matrix leads to a strong increase in H2 permeance from 65 GPU t…
Electrochemical conversion of CO2 to formic acid using a Sn based electrode: A critical review on the state-of-the-art technologies and their potenti…
2021
Abstract The electrochemical conversion of carbon dioxide is considered one of the most promising strategies to convert waste-CO2 into value-added chemicals. This review focuses on the synthesis of formic acid/formate in aqueous electrolyte using Sn-based cathodes; this material is considered relatively cheap and shows promising results in terms of faradaic efficiency. In order to be suitable at an industrial scale, the process should present simultaneously high current densities, faradaic efficiencies close to 100%, high concentrations of formic acid and long-term stability. Analysing the main results reported in the literature, it was observed that to date further studies are necessary to…
Electrochemical conversion of CO2 to HCOOH at tin cathode in a pressurized undivided filter-press cell
2018
Abstract The electrochemical reduction of carbon dioxide to formic acid was performed for the first time in a pressurized filter-press cell with a continuous recirculation of the electrolytic solution (0.9 L) at a tin cathode. It was shown that the performances of the system are comparable or slightly better than that of a batch system with a smaller volume (0.05 L). The selection of proper values of both current density and CO2 pressure allowed to achieve quite high values of faradaic efficiencies. Long-time electrolyses have shown that the system is stable and that it can allow to generate quite high concentrations of HCOOH (about 0.4 M).
High-pressure synthesis of CO and syngas from CO2 reduction using Ni-N-doped porous carbon electrocatalyst
2022
Abstract Electrochemical conversion of CO2 to CO or syngas (CO/H2 mixture) is considered one of the most promising approaches to valorise waste-CO2. To develop the process on industrial scale, it would be necessary to use selective and inexpensive electrodes and to obtain high productivities with low energy consumption. In this frame, Ni−NC catalysts are considered among the most interesting ones because of their relatively low cost, high faradaic efficiency in CO ( F E C O ), and high stability. However, up to now, quite low productivities were obtained as a result of low current densities achieved in aqueous electrolytes. In this work, we have evaluated the performances of a Ni−NC electro…
Photocatalytic CO2 reduction in gas–solid regime in the presence of H2O by using GaP/TiO2 composite as photocatalyst under simulated solar light
2014
GaP/TiO2 composites exhibited a remarkable photocatalytic activity for CO2 reduction in the presence of water vapor producing methane. By decreasing the GaP:TiO2 mass ratio an increase in the photocatalytic activity of the composite was observed for up to a 1:10 mass ratio. The photocatalytic activity of the composite can be attributed to the band structures of the solids as well as to the efficient charge transfer between GaP and TiO2 heterojunction.
Towards the electrochemical conversion of CO2 to formic acid at an applicative scale: technical and economic analysis of most promising routes
2021
In the last decade, the electrochemical conversion of CO 2 to formic acid, FA, using Sn‐based cathodes, was widely investigated. In this work, the technical feasibility and economic viability of this process were evaluated considering the most promising electrochemical routes reported in the literature. Five case studies, based on the utilisation of GDE technologies or high CO 2 pressures, were analysed. The cost for producing FA by the electrochemical route was compared with that of the conventional chemical route. Several scenarios were envisioned finding the target figures of merit, the potential bottlenecks (including low FA concentration, GDE cost and high energy consumption) of each t…