Search results for "COMBUSTION"
showing 10 items of 232 documents
The effects of biomass co-gasification and co-firing on the development of combustion dynamics
2018
Abstract Effects of wheat straw co-firing with gas (propane flame) and co-gasification/co-combustion with wood pellets on the development of thermo-chemical conversion of biomass pellets and on heat energy production were experimentally studied and analyzed with the aim to improve the gasification/combustion characteristics and the applicability of wheat straw as an alternative energy source for cleaner heat energy production. The results suggest that the wheat straw co-firing with propane provides an enhanced thermal decomposition of pellets with more complete combustion of volatiles increasing thus the heat output at thermo-chemical conversion of wheat straw and the produced heat energy p…
Distribution of biomass and site location of combustion and gasification power plants in western Sicily
2012
The substitution of conventional fossil fuels with biomass for energy production results both in the reduction of greenhouse gases emissions and in the replacement of non-renewable energy sources. The use of biomass for energy production responds to the growing pressure of government policies towards the achievement of better environmental sustainability of power generation processes. This is particularly true for the agricultural areas of Sicily, where the realization of new economic dynamics can lead to development of a local economic system. However, at present, generating energy from biomass is rather expensive due to both technological limits related to low conversion efficiencies, and…
Electrodynamic Control of the Combustion Characteristics and Heat Energy Production
2015
ABSTRACTElectric field effects (EFE) on combustion characteristics, heat energy production, and composition of polluting emissions have been investigated experimentally for different types of fuels (natural gas, biomass) providing experimental study of the EFE in a district heating boiler and complex modeling experiments in a small-scale pilot device. The DC field-induced variations of the produced heat energy, efficiency of heat energy production, flame characteristics, and the composition of polluting emissions have been studied for a positively biased axially inserted electrode and negatively biased (grounded) heat surfaces by varying the applied DC voltage, net current, and consumed ele…
Calibration of a knock prediction model for the combustion of gasoline-LPG mixtures in spark ignition engines
2015
Gaseous fuels, such as liquefied petroleum gas (LPG) and natural gas (NG), thanks to their good mixing capabilities, allow complete and cleaner combustion than gasoline in spark ignition (SI) engines, resulting in lower pollutant emissions and particulate matter. In a previous work the authors showed that the simultaneous combustion of gasoline and LPG improves an SI engine efficiency with respect to pure gasoline operation with any significant power loss. The addition of LPG to the gasoline-air mixture produces an increase in knock resistance that allows running the engine at full load with overall stoichiometric mixture and better spark advance. In order to predict both performance and ef…
Characterization of Biodiesel from Vegetable Oil Using Comprehensive Two-Dimensional Gas Chromatography
2012
Biodiesel from vegetable oils has been analyzed and its suitability for internal combustion engines has been assessed. The Standard biofuel’s characteristics have been investigated. Gas chromatography (GC) tests were carried out to characterize the fatty acid behavior. It was found that the mass percentage of saturated fatty acids did not change substantially with time, while unsaturated fatty acids increased with time for both B100 and B30. An increase in density for B100 and B30 with time was noted. Biodiesel density was within the standardization. The calorific values of biodiesel and its blend increased with time. Higher heating value for B100 increased from 41 to 43 MJ/kg while B30 inc…
Environmental analysis of chlorinated aromatic thioethers, sulphoxides and sulphones
1993
Abstract Chlorinated aromatic thioethers discussed here are polychlorinated dibenzothiophenes, thianthrenes and diphenylsulphides. Relatively little is known about their occurrence, behaviour and fate in the environment. Polychlorinated dibenzothiophenes and diphenylsulphides have recently been found to be formed in waste combustion and analysed in pulp mill effluents. Chlorinated sulphoxides and sulphones are usually metabolites or oxidation products of different chlorinated aromatic compounds. Different gas chromatographic-mass spectrometric techniques are used in the analysis of the chlorinated thioethers. The sulphoxides and sulphones, because of their higher polarity, can be isolated f…
Synthesis of high surface area perovskite catalysts by non-conventional routes
1997
Abstract The use of rare earth-containing perovskite oxides as total oxidation catalysts faces to the difficulty of obtaining high surface area materials and the need of calcination at high temperatures for its synthesis. In this work, perovskite NdCoO3 catalysts with relatively high surface areas were synthesized at soft calcination conditions by two non-conventional routes: heteronuclear organic complexes and amorphous precursors obtained by freeze-drying of nitrates solutions. Depending on the method used, different degrees of homogeneity in the bulk distribution of the component cations, oxygen non-stoichiometry as well as surface Co/Nd atomic ratios are obtained. In this way, the synth…
Determination of selected polyaromatic hydrocarbons by gas chromatography–mass spectrometry for the analysis of wood to establish the cause of sinkin…
2014
Abstract The aim of this paper was to establish the cause of sinking of an old wooden vessel by polycyclic aromatic hydrocarbon (PAH) analyses because wood combustion is a source of PAHs. In particular, the molecular PAH patterns generated by each source are like fingerprints and it is possible to determine the processes that generate PAHs by studying their distribution in wood samples. The relative abundance of high molecular weight PAHs, together with the PAH compound ratios and with total index (proposed by us) has demonstrated that samples owe their PAHs in wood archaeological material to a predominant single mode of origin, i.e. combustion processes, therefore we can say that the sinki…