Search results for "COMPOSITE"

Mechanical properties of recycled polyethylene ecocomposites filled with natural organic fillers

2006

The use of natural organic fillers in addition to postconsumer recycled polymers is getting a growing interest during the last years; this is due to many advantages they can provide in terms of cost, aesthetic properties, environmental impact. In this work, several types of wood flour (differing each other with regard to production source and particle size) were added to a recycled polyethylene coming from films for greenhouses and the effects of filler type, content, and size were investigated. Investigation was then focused on the improvement of mechanical properties, through the addition of polar copolymers (ethylene-co-acrylic acid, ethylene-vinyl acetate) and a maleic anhydride-grafted…

Kenaf-filled biodegradable composites: rheological and mechanical behaviour

2012

Biodegradable polymer composites, typically based on biodegradable polymer matrices and natural-organic fillers, are gaining rising interest and importance over the last few years. Several natural-organic fillers can be used but the most widespread so far is wood, in the form of fibres or flour. Alternative cellulosic fillers can ensure advantages in terms of resource utilization and properties of the final composite. In this work, Mater-Bi® based biodegradable composites were prepared with two kinds of wood flour, and directly compared with alternative composites containing kenaf fibres. The use of kenaf fibres allowed improved elastic modulus, tensile strength and interaction with the pol…

Dielectric properties of a filled epoxy resin: Effect of thermal treatments

1982

Dielectric measurements have been performed at several frequencies on samples of a cycloaliphatic epoxy resin filled with aluminum hydroxide. The samples were thermally treated at three different temperatures for times up to 2,000 hours. At low aging temperatures and times an improvement of the characteristics is observed due perhaps to an assessment of the bulk of the polymer and more precisely to a change in the free volume. At high temperatures and times a thermo-oxidation involving layers deeper and deeper becomes the predominant mechanism responsible of the decrease in the properties with respect to the virgin material.

Main dielectric relaxation of poly(methyl acrylate)–polystyrene interpenetrating polymer networks

2005

Abstract Two series of poly(methyl acrylate)–polystyrene sequential interpenetrating polymer networks were prepared by free radical polymerization using ethyleneglycol dimethacrylate as cross-linking agent. In one of them the cross-linking density was very low and the IPNs presented phase separation. The main dielectric relaxation appears in the IPNs in the same position in the frequency axis and almost with the same shape as in the pure PMA network. Nevertheless the ratio of the relaxation strength to the weight fraction of PMA in the IPN decreases slightly with the increase of polystyrene content. The other series of IPNs were highly cross-linked, in these IPNs a dielectric relaxation sti…

Synthesis and large scale fractionation of non-linear polymers: brushes and hyperbranched polymers

2002

Polymer brushes with poly(methyl methacrylate) (PMMA) backbone and polystyrene side chains were synthesized by radical polymerization of ω-methacryloyl-polystyrene macromonomers. Hyperbranched PMMA was obtained by means of self-condensing group transfer copolymerization of methyl methacrylate with an initiator-monomer containing a polymerizable methacryloyl moiety and an initiating silylketeneacetal function. Both non-linear products were fractionated using the method of continuous polymer fractionation, consisting in a particular type of continuous countercurrent extraction. The combination of methyl ethyl ketone (solvent) with acetone (AC) (precipitant) turned out to be suitable for the f…

The role of intermolecular forces in contact electrification on polymer surfaces and triboelectric nanogenerators

2019

This research was supported by the European Regional Development Fund within the project ‘‘Hybrid energy harvesting systems’’ 1.1.1.1./16/A/013.

2019

Abstract The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability and thermal degradation kinetics of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites filled with small amounts of MCM-41. The PMMA/MCM-41 composites were prepared through in situ polymerisation and melt mixing methods, with MCM-41 loadings of 0.1, 0.3, and 0.5 wt.%. The presence of MCM-41 increased the thermal stability of PMMA/MCM-41 composites prepared by melt mixing, but in the case of the in situ polymerised samples, the MCM-41 accelerate…

Rapid small-angle and wide-angle x-ray studies of crystallization behavior in polymers

1976

Small-angle and wide-angle x-ray scattering measurements, using a position-sensitive detector, were made during melt-crystallization of linear polyethylenes and PEO–PS–PEO triblock copolymer. The scattering measurements indicated that the triblock copolymer grew by the enlargement of regions in which lamellae are regularly stacked. During primary crystallization at higher temperatures similar behavior is observed in two linear polyethylenes. At lower temperatures, changes in the shape of small-angle scattering curves during the primary stage of crystallization indicate that amorphous gaps within the lamellar stacking become filled in. During secondary crystallization at higher temperatures …

The structure of high-performance polymer blends by small-angle neutron scattering

1997

Abstract Amorphous blends from a deuterated polyaryletherketone and a polyetherimide have been prepared and investigated by small-angle neutron scattering (SANS). The blends are combinatorial mixtures: the scattering quantity Φ1Φ2/S(q) is independant of the composition of the blends.

Fractional viscoelastic characterization of laminated glass beams under time-varying loading

2021

Abstract Laminated glass is a composite made of elastic glass layers sandwiching thin viscoelastic polymeric interlayers. There are several types of polymers, traditionally modelled as linear viscoelastic materials using a Prony’s series of units in the Maxwell-Wiechert arrangement. We show that one single element with fractional viscoelastic properties (two constitutive parameters that depend on environmental temperature), is sufficient to provide an accurate description of the polymer response under arbitrary time-varying actions. This is a great advantage over the classical viscoelastic characterization, which requires at least 10–15 terms in the Prony’s series, each one characterized by…