Search results for "COMPOSITE"
showing 10 items of 4584 documents
Development of Composites with a Self-Healing Function
2015
This research aimed to realize experimentally the facilevascular self-healing system in epoxy glass fibre reinforced composite. Using flexiblepolytetrafluoroethylene tubes as removable preforms, the channels were embeddedinto both neat epoxy resin and unidirectional glass-fibre reinforced epoxy laminate.Room temperature curable epoxy resin with a surfactant and an amine-basedhardener were the components of the binary healing agent. The specimens oftapered double cantilever beam geometry were subjected to Mode I fracture tests.Fracture of specimens released the healing agent from channels and triggeredself-healing process of the crack. Tested neat epoxy resin specimensdemonstrated recovery o…
The Synthesis, Characterization and Sintering of Nickel and Cobalt Ferrite Nanopowders
2012
The NiFe2O4 and CoFe2O4 ferrites were synthesized by two methods – chemical sol-gel self-combustion method and the high frequency plasma chemical synthesis and magnetic properties, crystallite size, specific surface area of synthesized products are characterized. Nanopowders synthesized in the high frequency plasma are with specific surface area in the range of (28 – 30) m2/g (the average particle size (38 – 40) nm, crystallite size ~40 nm). The ferrite nanopowders obtained by sol-gel self-combustion method have the specific surface area of (37 – 43) m2/g (average particle size (26 – 31) nm, crystallite size (10 – 20) nm). All synthesized nanopowders were sintered via pressure-less sinterin…
Softening of Silica Filled Styrene-Butadiene Rubber under Uniaxial Cyclic Loading
2016
Stress-strain behaviour of silica filled styrene-butadiene rubber showed strong hysteresis and cyclic softening, while these effects were almost negligible for the neat rubber. Significant Mullins effect occurs between the first and second loading cycles, whereupon samples reach their steady state after four repeated cycles. The degree of softening increases with volume content of silica characterizing the softening effect as a breakdown of the filler-formed microstructure defined by both, specific interactions in the filler associations and between the filler and rubber matrix. Contribution of different damage mechanisms to the total energy losses on different stages of extension was estim…
Surface Morphology of Single and Multi-Layer Silicon Nitride Dielectric Nano-Coatings on Silicon Dioxide and Polycrystalline Silicon
2019
Silicon nitride (Si3N4) in a form of single and multi-layer nanofilms is proposed to be used as a dielectric layer in nanocapacitors for operation in harsh environmental conditions. Characterization of surface morphology, roughness and chemical bonds of the Si3N4 coatings has an important role in production process as the surface morphology affects the contact surface with other components of the produced device. Si3N4 was synthesized by using low pressure chemical vapour deposition method and depositing single and multi-layer (3 – 5 layers) nanofilms on SiO2 and polycrystalline silicon (PolySi). The total thickness of the synthesized nanofilms was 20 – 60 nm. Surface morphology was investi…
Volume Changes in Filled Rubber Under Uniaxial Cyclic Loading
2011
Styrene-butadiene rubber, neat and filled with different silica content was investigated under uniaxial cyclic loading under a constant crosshead speed, with increasing deformation amplitude in subsequent loading cycles. Rubber was investigated in order to evaluate the reversibility of structure rearrangements, occurring in rubber when subjected to cyclic loading. Volume uniformly increases with growing strain and shows hysteresis at unloading. After complete unloading, no residual strain changes are observed. These data are in good conformity with the data of density measurements, which were made on specimens before and after the tests. By correlating data, obtained from volume changes and…
Augmentation of weld penetration by flux assisted TIG welding and its distinct variants for oxygen free copper
2021
Abstract A comparative study to investigate the influences of single component fluxes on the depth-to-width ratio (DWR) of oxygen free copper was carried out with novel variants of tungsten inert gas (TIG) welding namely Activated TIG (A-TIG), Flux Bounded TIG (FB-TIG) and Flux Zoned TIG (FB-TIG) processes. The experiments to identify the fluxes delivering the higher DWRs in A-TIG welding among thirteen distinct fluxes were followed by the trials with FB-TIG and FZ-TIG employing those identified DWR fluxes. The fluxes which outperformed with all the techniques were MoO3 & MgO. Reversed Marangoni and arc constriction mechanisms were perceived to be opt for such an increase in DWR. Metallurgi…
Study of phase transition in Bi3TiNbO9-BaBi2Nb2O9 ceramics
2016
Abstract The subject of the paper is lead free bismuth layer structure oxides (1-x)Bi3TiNbO9-xBaBi2Nb2O9 (x=0; 1; 2; 3 mol). The influence of Bi3TiNbO9/BaBi2Nb2O9 ratio on dielectric and structural properties was studied in a wide range of temperatures. Change in the ratio causes a decrease in the maximum value of dielectric permittivity and shifts the temperature of ε’max to low values, leading to linear decreasing of average grain size and linear increasing of ceramics density. These results indicate an augment of the packing degree and the participation of pores are significantly decreased with the increase of BaBi2Nb2O9 compound intake. Moreover, for 0.7Bi3TiNbO9-0.3BaBi2Nb2O9 ceramics …
Structural characterization and optical constants of p-toluene sulfonic acid doped polyaniline and its composites of chitosan and reduced graphene-ox…
2020
Para-Toluene sulfonic acid doped polyaniline (PANI), PANI/chitosan composites, PANI/reduced graphene-oxide composites and a ternary composite comprising of PANI, chitosan and reduced graphene-oxide have synthesised via oxidative polymerisation of aniline by Ammonium peroxydisulfate (APS). FTIR, XRD, FESEM and UV-VIS techniques were performed for the confirmation of the successful synthesis. The fundamental optical parameters such as, complex refractive index, complex dielectric constants and optical conductivity of the PANI and the composites were investigated in the UV-VIS-NIR range. The results show a clear dependence on the constituent component such as sulphur as well as the absorbance …
Vascularized composite allotransplantation - a Council of Europe position paper
2017
After more than 120 hand-upper extremity and 37 face transplant procedures performed worldwide, vascularized composite allotransplantation (VCA) now falls under the scope of organ transplant legislation in Europe and the United States. While in the USA, VCA has been considered as standard care since 2014, VCA in Europe is still performed through clinical research trials, except in United Kingdom. However, after two decades of favourable experience with upper extremity transplantation (UET), professionals in Europe are proposing hand allotransplantation as “controlled standard” care, as opposed to face transplantation (FT), which is still a challenging activity. The European Committee on Org…
Damage accumulation and life prediction in carbon fibre composite pressure vessels
2009
Composites and nanostructures