Search results for "CONSTRUCTION"
showing 10 items of 2670 documents
Hydrothermal liquefaction of waste biomass in stirred reactors: One step forward to the integral valorization of municipal sludge
2020
Abstract Hydrothermal liquefaction (HTL) of municipal sludge (MS) was performed at 350 °C for 30 min (subcritical water) and at 400 °C for 0 min (supercritical water) at fixed kinetic severity (LogR0 = 8.9) in static and stirred batch reactors to study the effect of the flow regime on the energy recovery (ER) of the process and on the quality of the products. With adopted experimental procedures it was possible to reduce to less than 10% the yield of lost organic compounds, termed volatiles (VT), and to collect and quantify a liquid hydrocarbon fraction (HC) separated from the biocrude (BC). The highest value of the HC yield, 25% w/w, was obtained in supercritical conditions. The C content …
Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption
2015
Nowadays admixtures and especially superplasticizers are unavoidable components of the concrete formulation. The high fluidizing efficiency of the comb-like superplasticizers must not overshadow their high costs. This study aims to determine the PCE structure parameters which influence their adsorption in order to enhance their resistance to sulfate competitive adsorption and thus minimize their dosage. The PCE adsorption has been studied on calcite and ettringite which are both surfaces representative of early hydrating cement. The effect of the POE side chain length and density and also of the PCE anionic function i.e. carboxylate, dicarboxylate or phosphate on the adsorption has been ana…
Progress in polymeric material for hydrogen storage application in middle conditions
2014
Hydrogen sorption using a manganese oxide anchored to PEEK (Poly(ether-ether-keton)) matrix was studied. The functionalization process and the obtained results on hydrogen storage capability of the synthesized polymer are reported. The functionalised polymer was characterised by Scanning Electron Microscopy, Transmission Electron Microscopy, X-ray diffraction and Volumetric Hydrogen sorption measurements. Different synthesis conditions in terms of precursor concentration and reaction time were used and the direct correlation between manganese oxide percentage and hydrogen storage capability was confirmed. In this way different powders were synthesised. It is assumed that the sample with 78 …
Rubberised bitumen manufacturing assisted by rheological measurements
2015
This paper investigates the effect of processing temperature and time on the rheological proper- ties of recycled tyre rubber-modified bitumens (RTR-MBs) produced using two different base binders and an ambient ground crumb rubber modifier (CRM). The production of the RTR- MBs was accomplished by means of a standard Brookfield rotational viscometer together with a modified impeller, dual helical impeller, to allow mixing as well as real-time viscosity measurements of the produced RTR-MBs. The rheological properties of the final RTR-MBs were determined by means of standard dynamic mechanical analysis oscillatory and multiple stress creep recovery testing using a dynamic shear rheometer. The …
Bio-based rigid high-density polyurethane foams as a structural thermal break material
2020
Abstract Sustainable development of building industry implies increasing usage of green materials. With this aim and for the intended application as a structural thermal break material, rigid high-density polyurethane foams have been manufactured using polyols derived from renewable resources - tall oil fatty acids. Thermal conductivity, compressive strength and stiffness of the foams of density ranging from ca. 100 to 680 kg/m3 have been determined. Comparison of the bio-based foams with reference foams derived from petrochemical resources demonstrated similar performance characteristics thus suggesting that bio-based foams can also serve as structural thermal break materials. Analytical m…
Surface and Intercalation Chemistry of Polycarboxylate Copolymers in Cementitious Systems.
2009
International audience; The Ca–Al-layered double hydroxide, the so-called AFm phase, is a product of cement hydration. It is shown that the interaction of this phase with anionic polycarboxylate ether (PCE)-based dispersant polymers is not a simple adsorption but a more complex intercalation phenomenon leading to the transient sequestration of the PCE within the AFm crystallites. As a result, part of the PCE is immobilized, forming a layered organo-mineral composite, and does not play its role of a dispersing agent. This article presents, along general considerations on the links between cement chemistry and rheology, a detailed investigation of the formation, structure, and stability of a …
A Fractional-Order Model of Biopolyester Containing Naturally Occurring Compounds for Soil Stabilization
2019
Currently, the use of polymers and biopolymers as soil-stabilizer additives for control of the soil degradation, deterioration, and desertification and for improving the arid and semiarid soils has been expanded significantly in the agricultural sector. This research was conducted to determine the effect of naturally occurring compounds, such as quercetin (Q) and sodium montmorillonite (NaMMt) at different weight ratios, in biopolyester, such as polylactic acid (PLA), aiming to formulate ecosustainable materials to control the soil degradation and to protect the environment. As known, the use of sophisticated analytical tools to describe the material rheology and melting properties is nowad…
Fluidizing efficiency of comb-like superplasticizers: The effect of the anionic function, the side chain length and the grafting degree
2015
Superplasticizers and especially polycarboxylate grafted polyethylene oxide (PCE) demonstrated their efficiency to fluidify concrete. The aim of this work is to investigate the evolution of the fluidity as a function of adsorption in a sulfated solution with a wide variety of comb-like superplasticizers and at incomplete adsorption rate. Polymers with various side chain lengths, grafting ratios and also with modified anionic functions (carboxylate, dicarboxylate and phosphate) were synthesized. Inert calcite suspensions were used to mimic early age cementitious materials avoiding the cement hydration. Models of polymer conformation and yield stress prediction have been tested. But the most …
Flexural Behavior of Glass Beams with T and I Shape Cross Sections
2017
AbstractGlass beams having T or I cross sections can be obtained as glass panels or laminated glass (LG) panels assembled with polymer adhesives of different types, such as semirigid (silicones, mo...
Towards storage-stable high-content recycled tyre rubber modified bitumen
2018
The addition of crumb rubber particles as bitumen modifier can be currently considered as a well-established alternative to conventional polymers for bitumen modification. However, Recycle Tyre Rubber (RTR) modified binders still present drawbacks such as poor mix workability and hot storage stability. Within this study the authors try unlocking the full potential of devulcanised tyre rubber-heavy oils blend, named Liquid Rubber (LR), by exploring the possibility of tailoring recycled polymer modified bitumen with unconventional high-content of RTR and designed to overcome the above mentioned technological problems of RTR modified bitumen while keeping its advantages. Results show that LR-b…