Search results for "CONTACT"
showing 10 items of 1003 documents
Modification of carboxyl groups of poly(ethylene-co-acrylic acid) via facile wet chemistry method: A kinetic study
2010
Abstract In this work, we present the results of a kinetic study of the surface modification of the carboxyl group of poly(ethylene-co-acrylic acid) into acyl chloride. Reaction temperature and time, concentration of the reactants, kind of agitation have been changed in order to understand their effect on the conversion. A study on the penetration of the reaction inside the sample bulk was also performed. The results indicate that, when short reaction times are adopted, the reaction limits to the outer layers of the samples and, in this case, on increasing the temperature, the concentration of the reactants and the stirring allows having a faster kinetic. At longer reaction times, the react…
Determination of the oxygen transmissibility and permeability of hydrogel contact lenses
1999
To test the validity of the method of stacked hydrogel contact lenses to obtain the oxygen permeability and transmissibility coefficients of the lenses, the coefficients of one low hydration (38% water) and two high hydration (55 and 58% water) hydrogel contact lenses stacked one to five on an oxygen electrode were deter- mined. From the oxygen diffusion through the lenses, the current intensity in the stationary state was determined, and from this the "instrument" the oxygen transmis- sibility was obtained. The permeability coefficients of the lenses, corrected for edge effects, were obtained from the slope of the plot of the reciprocal of the transmissibility coefficients versus the lens …
Highly water repellent aerogels based on cellulose stearoyl esters
2011
Herein we combine in a novel way the physical effect of porous structure of a cellulosic aerogel with the chemical effect of long alkyl tails by a well known homogeneous green esterification method, to achieve purely bio-based and highly water repellent cellulosic materials. As an alternative for a traditional fluoro derivatized hydrophobization, here long fatty acid tails are utilized to lower the surface energy. To minimize the process emission, ionic liquid (IL) 1-allyl-3-methylimidazolium chloride is used for the esterification, due to its non-volatility and recyclability. We have shown here that low degree of substitution (DS) of the fatty acid cellulose material enables the spontaneou…
Simultaneous application of vacuum and sweep gas in a polypropylene membrane contactor for the recovery of dissolved methane from water
2021
Abstract Vacuum and nitrogen as sweep gas were used simultaneously (combination mode) to generate the driving force in a microporous polypropylene membrane contactor for the recovery of dissolved methane from water. Experiments were carried out under different liquid flow-rates (5.0–28.0 L h−1), N2 flow-rates (0.5–1.5 L h−1) and vacuum pressures (0–480 mbar). The maximum removal efficiency of methane was >90% at moderate values of gas-to-liquid ratios (G/L) and vacuum of 0.2 and ≤ 200 mbar, respectively. Removal efficiencies obtained in combination mode were usually higher than when using vacuum or sweep gas, separately. To achieve a methane content >35% in the recovered gas, G/L values low…
Recovery of dissolved methane through a flat sheet module with PDMS, PP, and PVDF membranes
2022
Abstract A degassing contactor using a flat sheet membrane module (FM) was operated in sweep gas mode to study the performance of several commercial polymer membranes, both dense (polydimethylsiloxane, PDMS) and microporous (polypropylene, PP, and polyvinylidenefluoride, PVDF), for the recovery of dissolved methane from water. Non-steady state experiments were conducted at different liquid (QL, 3.5–40.5 L h-1) and gas flow rates (QN2, 0.05–15.00 L h-1). In the case of PDMS, PP, and when PVDF was operated at moderate high QL (≥ 21 L h-1), similar methane removal efficiencies (RE) were obtained. In the case of PVDF operated at relatively low QL (3.5 L h-1), a lower RE was observed. A model fo…
Influence of high power ultrasound on physical-chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features
2017
Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. …
Full Sliding “Adhesive-Like” Contact of V-Belts
2002
Abstract Analysis of power transmission in a belt drive consisting of e. g. two pulleys might be treated as a boundary value problem. Tight side tension FT, slack side tension FS and the wrap angle α are the three natural boundary conditions. In the literature, theories are developed where seating and unseating as well as the power transmitting part of the contact are considered. The solutions presented so far don’t fulfil the boundary conditions properly, since a certain tension ratio FT/FS is associated with a certain contact angle and not an a priori specified one. It appears that a new type of full sliding solution must be introduced to handle the boundary condition problem. During part…
Study of new joining technique: flat clinching
2007
In this paper a development of clinching, called flat clinching, is presented. After a press clinching process, the joined sheets have been deformed by a punch with a lower diameter against a flat die. In this way a new configuration is created with a geometry that has no discontinuity on the external surface (bottom). A new procedure has also been tested: the second step is perfomed by pressing the joint between two flat dies. This second case has revealed itself to be very effective.Tensile tests have been done to compare the joints strength among the various joining techniques. Moreover some joints have been cut to analyse the changing of the contact line shape and how its characteristic…
Comparing the dynamic performance of wastewater treatment systems: A metafrontier Malmquist productivity index approach
2015
The assessment of productivity change of wastewater treatment plants (WWTPs) is essential to improve the performance over time of the facilities evaluated. This study assessed and compared the productivity growth of WWTPs operating with non-homogeneous technologies. The metafrontier Malmquist productivity index (MMPI) was computed for a sample of 99 WWTPs encompassing 4 alternative technologies: activated sludge (AS), aerated lagoon (AL), trickling filter (TF) and rotating biological contactor (BD). The results indicated that, on average, WWTPs with AS and BD exhibited better performance over time than WWTPs with AL and TF. The MMPI indicates that, over the period 2007-2009, the productivit…
Ferroptosis Meets Cell–Cell Contacts
2021
Ferroptosis is a regulated form of cell death characterized by iron dependency and increased lipid peroxidation. Initially assumed to be selectively induced in tumour cells, there is increasing evidence that ferroptosis plays an important role in pathophysiology and numerous cell types and tissues. Deregulated ferroptosis has been linked to human diseases, such as neurodegenerative diseases, cardiovascular disorders, and cancer. Along these lines, ferroptosis is a promising pathway to overcoming therapy resistance of cancer cells. It is therefore of utmost importance to understand the cellular signalling pathways and the molecular mechanisms underlying ferroptosis regulation, including cont…