Search results for "CORROSION"

Relation between grain size and hydrogen diffusion coefficient in an industrial Pd–23% Ag alloy

1999

Abstract The diffusion mechanism of hydrogen in an industrial cold worked Pd–23% Ag alloy is investigated according to its grain size. The microstructural parameters are determined by X-ray diffraction analysis and the diffusion parameters are determined using the galvanostatic electrochemical permeation technique. Two diffusion mechanisms are displayed. For apparent grain size below 40 nm the hydrogen atoms diffuse in the grain boundaries. For grain size above 100 nm, an intergranular diffusion mechanism occurs. For intermediate grain size both mechanisms coexist. Furthermore, the diffusion in the grain boundaries is not faster than the diffusion in the bulk, as generally observed for pure…

Study of the Hydrogen Embrittlement Sensitivity of an X4CrNiMo 16.5.1 Stainless Steel and the Associated Electron Beam Weld

2015

X4CrNiMo 16.5.1 steel (commercial name APX4) is a low carbon martensitic stainless steel known for its remarkable mechanical characteristics and its good resistance to corrosion. The use of APX4 in the manufacture of high pressure gas vessels requires a thorough understanding of its resistance to Hydrogen Embrittlement (HE) as the gas can contain traces of hydrogen, and martensitic steels, and their welds, are generally very sensitive to HE. This paper deals with the first part of this study, involving the characterization of the microstructure and the mechanical properties of each zone of the electron beam weld (melted zone and four different heat affected zones), and the investigation of …

Pulsed laser cleaning of oxidized metallic surfaces in electrochemically controlled liquid confinement

1997

Pulsed laser cleaning of oxidized metallic surfaces is studied. To our knowledge, for the first time, it has been demonstrated that the application of pulsed laser irradiation in a liquid confinement at controlled electrochemical potential enhances the oxide film removal from metal surfaces. Systematic studies on simulated corrosion product films using optical reflectance profile, energy dispersive X-ray spectroscopy, and piezoelectric transducer measurements, have revealed that efficient oxide film removal by laser irradiation is achieved if a basic electrolyte solution is used and a cathodic potential is imposed. The advantages of this novel technique against laser irradiation in air are …

Effect of Hydrogen and Absence of Passive Layer on Corrosive Properties of Aluminum Alloys

2020

This paper reports the results of research on the effect of hydrogen permeation and the absence of passive layers on the variations in the corrosive properties of aluminum alloys. The study demonstrated that such variations contribute to the deterioration of corrosive properties, which in turn contributes to shortening the reliability time associated with the operation of aluminum alloy structures. The analysis involved structural aluminum alloys: EN AW-1050A, EN AW-5754, and EN AW-6060. It was demonstrated that the absorption of hydrogen by the analyzed alloys led to the shift of the electrode potential to the negative side. The built hydrogen corrosion cells demonstrate in each case the f…

Dual Ni/Ni-Co electrodeposited coatings for improved erosion-corrosion behaviour

2019

Abstract Industrial applications of hydrophobic metallic coatings are limited to durability of their surface structures against detrimental effects of the surrounding environments. In the present research, the life-long of the hierarchical structure of hydrophobic nickel coating in an erosive-corrosive solution was investigated. The effect of alloying with cobalt on strengthening the hierarchical structures was also investigated. In this regard, highly hydrophobic Ni/Ni, Ni-Co/Ni-Co, dual Ni/Ni-Co and dual Ni-Co/Ni coatings with rough hierarchical structures were electrodeposited. In situ electrochemical measurements were performed to investigate changes in corrosion resistance and hydropho…

Modelling intergranular and transgranular micro-cracking in polycrystalline materials

2018

Abstract In this work, a grain boundary formulation for intergranular and transgranular micro-cracking in three-dimensional polycrystalline aggregates is presented. The formulation is based on the displacement and stress boundary integral equations of solid mechanics and it has the advantage of expressing the polycrystalline problem in terms of grain boundary variables only. The individual grains within the polycrystalline morphology are modelled as generally anisotropic linear elastic domains with random spatial orientation. Transgranular micro-cracking is assumed to occur along specific cleavage planes, whose orientation in space within the grains depend upon the crystallographic lattice.…

Numerical modelling of the galvanic coupling in aluminium alloys: A discussion on the application of local probe techniques

2010

Abstract A discussion is proposed on the determination of the input values and the experimental validation of finite element modelling of the galvanic coupling in aluminium alloys by local probe techniques such as the Scanning Vibrating Electrode Technique (SVET) and the microcapillary electrochemical cell (microcell). Polarization curves obtained by the microcell were introduced as input conditions in the model based on Laplace or Nernst–Planck equation. SVET measurements were performed to determine the coupling current distribution on an Al/Al4%Cu bimetallic system. Agreement was found between simulated and experimental current distributions depending on the input conditions and the solve…

2018

Abstract When electrochemical techniques are used to probe the surface of corroding magnesium with the aim of obtaining quantitative information on the corrosion process, two peculiarities are generally observed: i) with anodic polarization, the rate of hydrogen evolution increases instead of decreasing and ii) during electrochemical impedance spectroscopy measurements, an inductive contribution is often observed at the low-frequency end of the spectra. The presence of these two phenomena clearly has an impact on the methodology that should be applied to correctly estimate corrosion rates from electrochemical data. The aim of this work is to provide a general mathematical description of the…

Influence of magnesium content on the corrosion resistance of the cut-edges of Zn–Mg-coated steel

2015

Abstract The ability of Zn–Mg coatings (with magnesium content between 5.8 and 15.5 wt.%) to protect steel sheets has been evaluated with local electrochemical techniques (scanning vibrating electrode technique, microcapillary electrochemical cell) and rotating disk electrode, and compared with the corrosion protection afforded by a pure zinc coating. From immersion tests of coated steel cut-edges, it is observed that alloying zinc with magnesium leads to a decrease of the galvanic current between the coating and the steel surface, and to an improvement of the steel corrosion resistance after a drying period, due to the presence of magnesium in the corrosion products.

Influence of the microstructure and laser shock processing (LSP) on the corrosion behaviour of the AA2050-T8 aluminium alloy

2011

International audience; The corrosion behaviour of AA2050-T8 was studied after polishing and after laser shock processing (LSP) treatment using the electrochemical microcell technique and the SVET. After polishing, pitting at constituent particles and intergranular corrosion were observed. By contrast, no intergranular corrosion developed after LSP. Microcell measurements revealed that LSP increases the pitting potential. SVET measurements revealed that local anodic currents are systematically lower on LSP-treated surfaces than on polished ones. The current density on the LSP-treated surface remains constant around 50 μA cm−2 up to 123 min after immersion, while on the polished surface it r…