Search results for "Calcium Hydroxide"
showing 10 items of 31 documents
Effect of commercial mineral-based additives on composting and compost quality.
2009
Abstract The effectiveness of two commercial additives meant to improve the composting process was studied in a laboratory-scale experiment. Improver A (sulphates and oxides of iron, magnesium, manganese, and zinc mixed with clay) and B (mixture of calcium hydroxide, peroxide, and oxide) were added to source-separated biowaste:peat mixture (1:1, v/v) in proportions recommended by the producers. The composting process ( T , emissions of CO 2 , NH 3 , and CH 4 ) and the quality of the compost (pH, conductivity, C/N ratio, water-soluble NH 4 –N and NO 3 –N, water- and NaOH-soluble low-weight carboxylic acids, nutrients, heavy metals and phytotoxicity to Lepidium sarivum ) were monitored during…
Biological and physico-chemical properties of new root canal sealers
2018
Background The purpose of the present study was to compare the biological and the physico-chemical properties of bioceramic-based root canal sealers, calcium hydroxide-based, MTA-based and epoxy resin-based root canal sealers. Material and methods Two bioceramic-based sealers, one calcium hydroxide-based sealer, one MTA-based sealer and two epoxy resin-based sealers were tested. Results EasySeal and MTA Fillapex showed severe citotoxic activity, AH Plus and SealapexTM moderate cytotoxicity, BioRoot™ RCS and TotalFill BC Sealer were both cytocompatible. Except for TotalFill BC Sealer, all root canal sealers caused inhibition zones when tested with E. faecalis. The highest inhibition zone was…
A pilot-plant for the selective recovery of magnesium and calcium from waste brines
2021
Abstract The problem of brines disposal has raised great interest towards new strategies for their valorisation through the recovery of minerals or energy. As an example, the spent brine from ion exchange resins regeneration is often discharged into rivers or lakes, thus impacting on the process sustainability. However, such brines can be effectively reconcentrated, after removal of bivalent cations, and reused for the resins regeneration. This work focuses on developing and testing a pilot plant for selective recovery of magnesium and calcium from spent brines exploiting a novel proprietary crystallization unit. This is part of a larger treatment chain for the complete regeneration of the …
Hot air stream reduces cytotoxicity of light-cured calcium hydroxide based cements
2019
Background The light-cured calcium hydroxide based cements have incomplete polymerization and unconverted monomers can cause pulp cell damage. The aim of this study was to evaluate the influence of a warm and hot air stream on the cytotoxicity of light-cured calcium hydroxide based cements. Material and methods The materials Dycal (conventional cement), Biocal, Hidrox-Cal, and Ultra-Blend Plus (light-cured calcium hydroxide cements) were submitted to cytotoxicity analysis after polymerization, without vs. with previous heat treatment with a warm (37°C) and a hot (60°C) air stream. Following polymerization, cements were maintained in culture medium for 24 hours and 7 days, and subjected to t…
Halloysite Nanotubes Loaded with Calcium Hydroxide: Alkaline Fillers for the Deacidification of Waterlogged Archeological Woods
2018
A novel green protocol for the deacidifying consolidation of waterlogged archaeological woods through aqueous dispersions of polyethylene glycol (PEG) 1500 and halloysite nanotubes containing calcium hydroxide has been designed. First, we prepared functionalized halloysite nanotubes filled with Ca(OH)2 in their lumen. The controlled and sustained release of Ca(OH)2 from the halloysite lumen extended its neutralization action over time, allowing the development of a long-term deacidification of the wood samples. A preliminary thermomechanical characterization of clay/polymer nanocomposites allows us to determine the experimental conditions to maximize the consolidation efficiency of the wood…
Early root surface colonization by human periodontal ligament fibroblasts following treatment with different biomaterials
2013
The present in-vitro study examined the effects of different biomaterials on early root surface colonization by human periodontal ligament (PDL) fibroblasts using confocal-laser-scanning-microscopy (CLSM).Fifteen periodontally-diseased teeth were extracted, treated with scaling/root planing and longitudinally cut to obtain 30 root fragments. Fragments were treated either with 24% EDTA following application of enamel matrix derivative (EMD), 24% EDTA or EMD only, nanocrystalline hydroxyapatite (NHA) paste or oily calcium hydroxide suspension (OCHS) for 1 h each. The analogue untreated root specimens served as controls. Root fragments were incubated with human PDL fibroblasts and cellular pro…
Bulk pre-reactional transformations preceding the thermal decomposition of calcium hydroxide into oxide
1990
The present paper is an extended abstract which should be considered as an introduction to the papers already published by us on this new topic. An extended synthesis of these papers was given in the lecture. The original information introduced here is the figure. It is a PH2O vs. T diagram which gives the pre-reactional domain between the stability domains of calcium hydroxide and calcium oxide. Chemical reactions are proposed as an interpretation of the observed pre-reactional transformations.
Effect of pH on compressive strength of some modification of mineral trioxide aggregate
2013
Objectives: Recently, it was shown that NanoMTA improved the setting time and promoted a better hydration process which prevents washout and the dislodgment of this novel biomaterial in comparison with WTMA. This study analyzed the compressive strength of ProRoot WMTA (Dentsply), a NanoWMTA (Kamal Asgar Research Center), and Bioaggregate (Innovative Bioceramix) after its exposure to a range of environmental pH conditions during hydration. Study Design: After mixing the cements under aseptic condition and based on the manufacturers' recommendations, the cements were condensed with moderate force using plugger into 9 × 6 mm split molds. Each type of cement was then randomly divided into three…
Efficacy of the NaviTip FX irrigation needle in removing calcium hydroxide from root canal
2012
Objective: To evaluate the effectiveness of the NaviTip FX, brush-covered irrigation needle, in removing calcium hydroxide from the root canal. Study Design: Thirty single-rooted teeth were randomly divided into three groups: A - irrigation with a hypodermic needle inserted as far as possible without binding and activation with #30 K-type file; B - Irrigation with a hypodermic needle without activation; C - irrigation with NaviTip FX needle. Sodium hypoclorite 1% was used in irrigation. The root canals were examined trough scanning electron microscopy. Calcium hydroxide removal was recorded at 1, 5, and 10mm from the working length (WL) and the data were analysed using one-way ANOVA test (p…
Experimental study of Si–Al substitution in calcium-silicate-hydrate (C-S-H) prepared under equilibrium conditions.
2009
International audience; C-A-S-H of varying Al/Si and Ca/(Al+Si) ratios have been prepared introducing C-S-H (Ca/Si=0.66 and 0.95) at different weight concentrations in a solution coming from the hydration of tricalcium aluminate (Ca3Al2O6) in water. XRD and EDX (TEM) analyses show that using this typical synthesise procedure, pure C-A-S-H is obtained only for calcium hydroxide concentrations below 4.5 mmol L−1. Otherwise, calcium carboaluminate or strätlingite is also present beside C-A-S-H. The tobermorite-like structure is maintained for C-A-S-H. A kinetic study has shown that the formation of C-A-S-H is a fast reaction, typically less than a few hours. The Ca/(Al+Si) ratio of C-A-S-H mat…