Search results for "Calorimetry"
showing 10 items of 504 documents
Thermal behavior and spherulitic superstructures of SBC triblock copolymers based on polystyrene (S), polybutadiene (B) and a crystallizable poly(ɛ-c…
1996
The dynamic crystallization and the melting behavior of polystyrene-block-poly(e-caprolactone) (PS-b-PCL, short notation SC), polybutadiene-block-poly(e-caprolactone) (PB-b-PCL, BC) and polystyrene-block-polybutadiene-block-poly(e-caprolactone) (PS-b-PB-b-PCL, SBC) have been studied using differential scanning calorimetry. The copolymers with high molecular weight exhibit microphase separation into microphases consisting of polystyrene, polybutadiene and poly(e-caprolactone) and partial crystallization of the corresponding PCL block. The crystallization occurs at temperatures below the PS glass transition. Depending on the block copolymer composition, crystallization takes place through a c…
Effect of CTBN rubber inclusions on the curing kinetic of DGEBA–DGEBF epoxy resin
2003
Abstract The curing kinetics of an epoxy resin matrix, based on diglycil ether of bisphenol A and F (DGEBA–DGEBF), associated with an anhydride hardener, at different carboxyl-terminated copolymer of butadiene and acrylonitrile liquid rubber (CTBN) concentration (0–10 phr) are studied using a differential scanning calorimetry (DSC) and a stress-controlled rheometer in isothermal and dynamic conditions. The aim of this work is to correlate the presence of the rubber phase with the transition phenomena that occur during the curing process. The CTBN rubber induces a catalytic effect on the polymerization of the pure resin clearly observed by a significant enhancement of the curing rate. Calori…
Accelerated laboratory weathering of polypropylene composites filled with synthetic silicon-based compounds
2019
Abstract Non-functionalized and n-alkyl functionalized polyhedral oligomeric silsesquioxanes (POSS), siloxane-silsesquioxane resins and the sol-gel silicas were for the first time examined as possible UV-stabilizers and/or antioxidants in polypropylene (PP). The obtained composites were subjected to the accelerated laboratory weathering tests. The influence of the weathering conditions on the structure and properties of the PP materials was evaluated on the basis of the results from Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) studies. It was found that weathering resistance of the PP materials was strongly de…
Thermal and Structural Analysis of Natural Fiber Reinforced Starch-Based Biocomposites
2006
This is the second part of a series of articles dealing with characterization of starch based biodegradable composites. Potato, sweet potato, and corn starch varieties were used as matrices of the biocomposites. Natural fibers including jute, sisal, and cabuya were used as discrete reinforcement. Water and glycols were used as plasticizers. Compression molded specimens were prepared and characterized by a variety of techniques. Differential Scanning Calorimetry (DSC) and Thermogravimetry (TGA) were used to characterize the thermal behavior of these composites. Processed specimens did not show the typical endothermic peak observed in DSC scans for native starch powder. No significant differe…
Morphology and properties of blends of polyethylene with a semiflexible liquid crystalline polymer
1995
Blends of three polyethylene (PE) samples (two HDPE grades and LLDPE) with an experimental sample of a semiflexible liquid crystalline polymer (SBH 1 :1 :2 by Eniricerche) have been prepared in a Brabender compounder. The processing-aid effect of the LCP has been demonstrated by the decreased energy required for extruding the blends, as compared to that needed for neat PE. The thermal properties, as studied by differential scanning calorimetry (DSC), have shown that the two components of the blends are immiscible. However, the dispersed SBH phase has been found to act as a nucleating agent for the crystallization of LLDPE, whereas no such effect was observed for HDPE. This has been taken as…
Thermal and dynamic mechanical properties of beeswax-halloysite nanocomposites for consolidating waterlogged archaeological woods
2015
Abstract Thermal and mechanical properties were determined for the halloysite nanotubes (HNT)/beeswax composites at various compositions. The beeswax degradation temperatures and time course, provided by thermogravimetry (TG), evidenced the improvement of the thermal properties operated by HNT. Differential scanning calorimetry (DSC) allowed us to determine the enthalpy of melting as well as the time course of the melting process for beeswax. A slight loss of beeswax crystallinity was observed upon HNT addition. The dynamical mechanical analysis (DMA) provided the loss and the storage modulus for the nanocomposites upon heating and it was shown that the nanoclays create an inorganic framewo…
One-pot synthesis and characterization of aliphatic poly(oxytetramethylene) ionene
2002
Abstract One-pot synthesis of poly(oxytetramethylene) ionene (POI) composed of one dimethylammonium group in each repeating unit is described. POI was prepared by using the cationic polymerization of tetrahydrofuran, followed by the chain extension reaction of living poly(oxytetramethylene) (POTM) chain with N , N -dimethylaminotrimethylsilane. The weight average molecular weight of the ionene with bromide counter-anion (POI–Br) was 48,000 g/mol and the molecular weight of POTM between the ionic sites was ca. 2100. POI–Br showed polyelectrolyte behavior in polar solvent. The elastomeric film of POI–Br was prepared: its tensile strength at break and elongation at break were ca. 11 MPa and ca…
Combining carvacrol and nisin in biodegradable films for antibacterial packaging applications
2021
Abstract In this work, the feasibility of antibacterial biopolymeric films containing carvacrol (CRV) and a nisin commercial formulation (Nis) for potential food packaging applications was investigated. As polymer matrix, a commercial biodegradable polymer formulation of Mater-Bi (MB) was chosen due to its significant food packaging applications. CRV and Nis were chosen due to their well-established antibacterial properties and their potential synergistic effect. MB/CRV, MB/Nis, and MB/CRV/Nis systems were produced by melt mixing and compression molding. The mechanical properties of the films were evaluated by tensile tests. Differential scanning calorimetry was assessed aiming at investiga…
Evaluation of the interaction and drug release from alpha,beta-polyaspartamide derivatives to a biomembrane model
2005
This article reports on a comparative study on the ability of various polymers, containing hydrophilic and/or hydrophobic groups, to interact with a biomembrane model using the differential scanning calorimetry (DSC) technique. Multilamellar vesicles of mixed dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidic acid (DMPA) were chosen as a model of cell membranes. The investigated samples were a water soluble polymer, the alpha,beta-poly(N-2-hydroxyethyl)-DL-aspartamide (PHEA) and its derivatives partially functionalized with polyethylene glycol (PEG2000) to obtain PHEA-PEG2000, with hexadecylamine (C16) to obtain PHEA-C16, and with both compounds to obtain PHEA-PEG2000-C16. Th…
PAA-PAMPS Copolymers as an Efficient Tool to Control CaCO3 Scale Formation
2013
Scale formation, the deposition of certain minerals such as CaCO3, MgCO3, and CaSO4 center dot 2H(2)O in industrial facilities and household devices, leads to reduced efficiency or severe damage. Therefore, incrustation is a major problem in everyday life. In recent years, double hydrophilic block copolymers (DHBCs) have been the focus of interest in academia with regard to their antiscaling potential. In this work, we synthesized well-defined blocklike PAA-PAMPS copolymers consisting of acrylic acid (AA) and 2-acrylamido-2-methyl-propane sulfonate (AMPS) units in a one-step reaction by RAFT polymerization. The derived copolymers had dispersities of 1.3 and below. The copolymers have then b…