Search results for "Cathode"
showing 10 items of 296 documents
Steering of a Sub-GeV electron beam through planar channeling enhanced by rechanneling
2014
We report the observation of efficient steering of a 855 MeV electron beam at MAMI (MAinzer MIkrotron) facilities by means of planar channeling and volume reflection in a bent silicon crystal. A $30.5\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$ thick plate of (211) oriented Si was bent to cause quasimosaic deformation of the (111) crystallographic planes, which were used for coherent interaction with the electron beam. The experimental results are analogous to those recorded some years ago at energy higher than 100 GeV, which is the only comparable study to date. Monte Carlo simulations demonstrated that rechanneling plays a considerable role in a particle's dynamics and hinders the spoiling…
Six-dimensional measurements of trains of high brightness electron bunches
2015
Trains of ultrashort electron pulses with THz repetition rate, so-called comblike beams, are assuming an ever growing interest in plasma-based acceleration. In particle-driven plasma wakefield acceleration (PWFA), a train of driver bunches with separation of the order of plasma wavelength, i.e., 300 μm, resonantly excites a plasma wake, which accelerates a trailing witness bunch, injected at the accelerating phase. Comblike beams have great potentialities in different fields of applications. In particular, radiation sources, such as free-electron lasers and THz radiation, take advantage from the possibility to tailor electron beams modulated both in time and energy, to customize emission ba…
Preparation and Analysis of Ni–Co Catalyst Use for Electricity Production and COD Reduction in Microbial Fuel Cells
2019
Microbial fuel cells (MFCs) are devices than can contribute to the development of new technologies using renewable energy sources or waste products for energy production. Moreover, MFCs can realize wastewater pre-treatment, e.g., reduction of the chemical oxygen demand (COD). This research covered preparation and analysis of a catalyst and measurements of changes in the concentration of COD in the MFC with a Ni&ndash
DFT modelling of oxygen adsorption on the Ag-doped LaMnO3 (001) surface
2019
This study was partly financed by the State Education Development Agency of the Republic of Latvia via the Latvian State Scholarship (A.A.) and Latvia-Ukraine Project (Grant LV-UA/2018/2 to E.K.). The work of T.I. is performed under the state assignment of IGM SB RAS. Also, this research was partly supported by the Ministry of Education and Science of the Republic of Kazakhstan in the framework of the scientific and technology Program BR05236795 ‘‘Development of Hydrogen Energy Technologies in the Republic of Kazakhstan’’. The authors thank M. Sokolov for technical assistance and valuable suggestions.
Sustainable Biomass-Derived Carbon Electrodes for Potassium and Aluminum Batteries: Conceptualizing the Key Parameters for Improved Performance
2023
The development of sustainable, safe, low-cost, high energy and density power-density energy storage devices is most needed to electrify our modern needs to reach a carbon-neutral society by ~2050. Batteries are the backbones of future sustainable energy sources for both stationary off-grid and mobile plug-in electric vehicle applications. Biomass-derived carbon materials are extensively researched as efficient and sustainable electrode/anode candidates for lithium/sodium-ion chemistries due to their well-developed tailored textures (closed pores and defects) and large microcrystalline interlayer spacing and therefore opens-up their potential applications in sustainable potassium and alumin…
USE OF Ni-Co ALLOY AS CATHODE CATALYST IN SINGLE CHAMBER MICROBIAL FUEL CELL
2017
Technology of microbial fuel cells allowing for the direct production of electricity from biodegradable materials can provide only energy production, but also wastewater treatment. This technology is seen as supporting of the traditional wastewater treatment. One of the problems with microbial fuel cells is a low current density of those energy sources. Nonetheless, it is possible to increase the current density by using the catalyst for electrodes (anode and cathode). The possibility of wastewater treatment using the Ni-Co alloy as catalyst for single chamber microbial fuel cells is presented in this paper. The studies have included measurements of H2O2 reduction on Ni-Co catalyst, power o…
Single chamber microbial fuel cell with Ni-Co cathode
2017
The possibility of wastewater treatment and the parallel energy production using the Ni-Co alloy as cathode catalyst for single chamber microbial fuel cells is presented in this research. The research included a preparation of catalyst and comparison of COD, NH4 + and NO3 - reduction in the reactor without aeration, with aeration and with using a single chamber microbial fuel cell with Ni-Co cathode. The reduction time for COD with the use of microbial fuel cell with the Ni-Co catalyst is similar to the reduction time with aeration. The current density (2.4 A·m-2 ) and amount of energy (0.48 Wh) obtained in MFC is low, but the obtained amount of energy allows elimination of the energy neede…
Effects of Lithium Source and Content on the Properties of Li-Rich Layered Oxide Cathode Materials
2023
Lithium-rich layered oxide (LLO) are considered high-capacity cathode materials for next-generation lithium-ion batteries. In this study, LLO cathode materials were synthesized via the hydroxide coprecipitation method followed by a two-step lithiation process using different lithium contents and lithium sources. The effects of lithium content and lithium source on structure and electrochemical performance were investigated. This study demonstrated the clear impact of Li/TM ratio on electrochemical performance. Lower Li/TM ratio reduced the irreversible capacity loss in the first cycle and provided better cycling stability among all samples. The best results exhibited an initial discharge ca…
Microbial fuel cell with Cu-B cathode and KMnO4 catholyte
2017
The increasing of standard living causes the increases energy consumption and waste or wastewater production. The possibility to combine wastewater treatment and electricity production can accomplish a microbial fuel cell. The possibility of wastewater treatment using the Cu-B catalyst with KMnO4 catholyte for microbial fuel cells is presented in this paper. The measurements covered comparison of changes in the concentration of COD, NH4+ and NO3- in the reactor without aeration, with aeration and with using a microbial fuel cell (with Cu-B cathode and KMnO4 catholyte). The reduction time for COD with the use of microbial fuel cell with the Cu-B catalyst (and KMnO4 catholyte) is similar to t…
Nano-graphite cold cathodes for electric solar wind sail
2015
The nanographite (NG) films consisting of tiny graphite crystallites (nanowalls) are produced by carbon condensation from methane–hydrogen gas mixture activated by a direct current discharge. High aspect ratio and structural features of the NG crystallites provides efficient field electron emission (FE). Applicability and performance of the NG films in an electron gun (E-gun) of a solar wind thruster system with an electric sail (E-sail) is tested. The long-term tests are demonstrated suitability of E-gun assembly with the NG cathodes for the real space missions. The results of the tests are analyzed and physical mechanisms of the cathode aging and practical methods for improvement performa…