Search results for "Cementitious"

Utilization of water glass as an activator in the manufacturing of cementitious materials from waste by-products

1987

Abstract In the present paper, the possibility of producing new-type cementless building materials is discussed when water glass as an activating agent is used. The experimental data are presented for a set of raw materials which normally do not show any binding ability. However, if they undergo some physico-chemical treatment and water glass is used, a solid structure of the material is formed. According to the method described here, lots of different mineral waste by-products could be activated, thus gaining binding properties.

Analisi Sperimentale del Comportamento Ciclico di Elementi in Calcestruzzo a Bassa Resistenza Confinati con FRCM

2013

Vengono riportati i principali risultati di una campagna sperimentale finalizzata alla caratterizzazione della risposta sotto carichi assiali ciclici di colonne di calcestruzzo a bassa resistenza con sezione circolare, quadrata e rettangolare, rinforzate con fibre di carbonio immerse in matrice cementizia (CFRCM). Sono state condotte prove di compressione assiale su 30 campioni di altezza 600 mm, 10 a sezione cilindrica di diametro 300 mm, 10 quadrata di lato 200 mm, e 10 rettangolare di lato 200x400 mm. Le prove sono finalizzate a indagare gli effetti del carico ciclico, della forma della sezione, del raggio di curvatura degli spigoli e del numero di strati di tessuto di rinforzo sul legam…

Preventing early age chloride migration into low-carbon concrete

2019

The use of substituting cementitious materials (SCMs) to produce low-carbon concrete is escalating. This contributes to reducing the anthropogenic emission of CO2, and to reduce harmful temperature gradients during cement hydration in massive structures. Mature low-carbon concretes are known to perform well on both strength and durability. However, the maturity process is slow compared to that of standard concrete. Structures made from low-carbon concrete are subject to penetration of agents like chloride at early age, accelerating degrading processes. Chloride penetration is a major problem especially to infrastructure, due to seawater proximity and the use of de-icing agents. Solutions fo…

Engineering Photocatalytic Cements: Understanding TiO2 Surface Chemistry to Control and Modulate Photocatalytic Performances

2010

The present work addresses the aggregation/dispersion properties of two commercial titanias for application as photocatalysts in concrete technology. A microsized m-TiO2 (average particle size 153.7 ± 48.1 nm) and a nanosized n-TiO2 (average particle size 18.4 ± 5.0 nm) have been tested in different ionic media (Na+, K+, Ca2+, Cl−, SO42−, synthetic cement pore solution) at different pHs and in real cement paste specimens. Results highlighted that ion–ion correlations play a fundamental role in TiO2 particles aggregation in the cement environment. A particle aggregation model derived from TiO2 surface chemistry is proposed here and used to justify such aggregation phenomena in real cement pa…

Recent Development on Self-Cleaning Cementitious Coatings

2013

The recent improvements in nano-technologies applied to building coatings are reported, starting from the historical origins of the research on photocatalysis. The description of the main air pollutants and the chemical mechanism of photocatalysis introduce to self-cleaning surfaces and the super-hydrophilic and hydrophobic attitude. Self-cleaning cementitious surfaces, due to nano-structured photocatalysts, mainly titanium dioxide, show environmental benefit in reduction of air pollutants and many experimental evidences are reported together with several applications on building construction. International standards and main spectroscopic techniques aim to evaluate the benefit in terms of …

Hydration of cementitious materials, present and future

2011

This paper is a keynote presentation from the 13th International Congress on the Chemistry of Cement. It discusses the underlying principles of hydration and recent evidence for the mechanisms governing this process in both Portland cements and other cementitious materials. Given the overriding imperative to improve the sustainability of cementitious materials, routes to reducing CO2 emissions are discussed and the impact of supplementary materials on hydration considered. (C) 2011 Elsevier Ltd. All rights reserved.

RECYCLING SPENT COFFEE WASTE FOR INNOVATIVE THERMO-PLASTERS: DEVELOPMENT OF A PROTOTYPE

2022

This paper presents an experimental study aimed at testing the real energy performance of a thermo-plaster prototype made of an ordinary mortar boosted by various percentages of spent coffee ground. That is one of the wastes of the brewing process that are usually disposed of in landfill with great concerns for the possible environmental footprint due to its organic nature and possible harmful components. In this paper, the mortar was manufactured froman ordinary Portland cement and sand, partially substituted by the waste. Specimens characterization is briefly outlined and a careful examination of the thermal properties is carried out. A plastering prototype was manufactured and placed in …

Experimental results of RC columns strengthnened with Fiber Reinforced Cementitious Mortars

2012

The structural behaviour of reinforced concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix was investigated. Specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression to investigate the efficiency of a Polypara-phenylene-benzo-bisthiazole (PBO) Fibre Reinforced Cementitious Mortars (FRCM) system in increasing both carrying capacity and ductility. The experimental results show that confinement with PBO fibre produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardening behaviour up to …

Photocatalytic properties of cement-based plasters and paints, containing mineral pigments

2010

Innovative cement-based pre-mix products, for surface coating of buildings, possessing photocatalytic activity, arouse great interest due to achievable results in terms of reduction of the air pollution and in the maintenance of aesthetics.The photoactivity is induced by the presence of a photocatalyst, titanium dioxide, which can accelerate the oxidation processes of air pollutants, particularly nitrogen oxides (NOx) and volatile organic compounds (VOCs), mainly produced by incomplete combustion of fuel and present in urban environment through the exhaust gases of motor vehicles. The surfaces which are coated with these products acquire a self-cleaning characteristic (maintenance of origin…

Experimental investigation on the effectiveness of basalt-fibre strengthening systems for confining masonry elements

L’impiego di materiali compositi per il rinforzo di colonne in muratura è diventato una pratica ampiamente diffusa nel corso degli ultimi decenni. Questa tecnica, che consiste generalmente nell’applicazione di materiali polimerici fibrorinforzati (Fibre Reinforced Polymer-FRP), ha mostrato buone potenzialità, essendo in grado di garantire notevoli incrementi di resistenza e duttilità dell’elemento rinforzato, grazie ad un’azione di confinamento passivo. Tuttavia, l’impiego di compositi a matrice polimerica presenta alcuni limiti legati soprattutto alle prestazioni delle resine epossidiche, che a causa della loro natura sintetica danno luogo a problemi di compatibilità con il supporto murari…