Search results for "Ceramic"

Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension

2010

The presence of stress concentrations at holes and notches is known to reduce the strength of composite materials. Due to complexity of the damage processes at a stress raiser in a composite, different modeling approaches have been developed, ranging from empirical point and average stress criteria to involved damage mechanics or cohesive zone-based models of failure. Finite fracture mechanics approach with a coupled stress and energy failure criterion, recently developed and applied mainly to cracking in homogeneous isotropic materials, allows predicting the appearance and propagation of a crack using material strength and toughness characteristics obtained from independent tests. The pres…

Application of time–stress superposition to nonlinear creep of polyamide 66 filled with nanoparticles of various sizes

2007

The long-term tensile creep of polyamide 66 and its nanocomposites filled with 1 vol.% TiO2 nanoparticles 21 and 300 nm in diameter is studied. It is assumed that the dominant mechanisms of creep deformation are of viscoelastic nature, while the contribution of plastic strains is not essential in the stress (< 0.6 of the ultimate stress) and time (about 100 hours) ranges considered. The creep isochrones obtained show that the materials exhibit a nonlinear viscoelastic behaviour and the degree of nonlinearity is reduced significantly by incorporation of the nanoparticles. The evolution of viscoelastic strains is less pronounced for the nanocomposite filled with smaller nanoparticles. Smooth …

Quasi-Ductile Behaviour of Carbon-Reinforced Carbon

1991

Firstly a brief review of the problem of a “ductilization” of ceramic materials by endless-fiber reinforcement is given. The problems, especially the influence of the frictional stress in the fiber-matrix interface, are pointed out for the unidirectionally reinforced ceramic matrix composite (CMC) system LAS/SiC, which is well documented in the literature.

Influence of Uniaxial Pressure on Dielectric Properties of the PLZT-x/65/35 (x = 11 and 13) Ceramics

2012

Uniaxial pressure (0–1000 bars) effects on the dielectric properties of the PLZT-x/65/35 ceramic samples (x = 11 and 13) samples was investigated. The obtained results reveal that the applied stress largely changes the dielectric properties of these ceramics. Applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity and a change of the frequency dispersion. Besides with increasing the pressure the ϵ-peak shifts to a higher temperature. The results show that applying the uniaxial pressure induces similar effects as increasing the Ti−ion concentration in PZT system. These effects can be connected with the change in domain structure under the action of …

Luminescence of localized states in silicon dioxide glass. A short review

2011

Abstract The target is the description of the properties of localized states in silica glass, which relate to aspects of short-to-intermediate-range order. It has been observed that laser light interaction with localized states of silica glass leads to the creation of luminescence centers. Created luminescence centers, excited with laser light, provide intra-center luminescence of oxygen deficient centers (ODC) comprising a blue band at 2.7 eV and a UV band at 4.4 eV. Structurally, these ODCs are understood to comprise twofold-coordinated silicons that are commonly part of some larger local structure, and their luminescence bands can be suppressed by reaction with chlorine or hydrogen. Besi…

Electrochemical determination of boron in minerals and ceramic materials

2004

Abstract A method for quantitatively determining boron in minerals and ceramic materials is described. It is based on the abrasive attachment of mixtures of ZnO plus sample to PIGEs. After a reductive deposition step, square wave voltammograms recorded for those modified electrodes immersed into 0.10 M NaCl+0.25 M mannitol provide well-defined stripping peaks at −0.85 and −0.15 V vs. AgCl/Ag for the oxidation of Zn and B, respectively. The quotients between the peak areas and the peak currents for the stripping oxidation of B and Zn vary linearly with the molar ratio of B and Zn in the mixture, thus providing an electrochemical method for determining the boron content in solid samples. Resu…

Biomaterials coated by dental pulp cells as substrate for neural stem cell differentiation

2011

[EN] This study is focused on the development of an in vitro hybrid system, consisting in a polymeric biomaterial covered by a dental pulp cellular stroma that acts as a scaffold offering a neurotrophic support for the subsequent survival and differentiation of neural stem Cells. In the first place, the behavior of dental pulp stroma on the polymeric biomaterial based on ethyl acrylate and hydroxy ethyl acrylate copolymer was studied. For this purpose, cells from normal human third molars were grown onto 0.5-mm-diameter biomaterial discs. After cell culture, quantification of neurotrophic factors generated by the stromal cells was performed by means of an ELISA assay. In the second place, s…

STRONTIUM CONCENTRATION DEPENDENCE OF SELECTED STRUCTURAL AND MECHANICAL PROPERTIES OF POLYCRYSTALLINE Ba1−XSrXTiO3

2009

ABSTRACT Microstructure and material constants such as Young modulus E, shear modulus G, Poisson ratioν of polycrystalline ferroelectric materials Ba1-xSrxTiO3 for 0≤x≤0.4 were investigated to determine their dependence on strontium concentration. The performed investigations showed that the material is chemically homogeneous. It was found that the strontium concentration had no significant influence on the grain size. The highest value of Young's modulus is observed for Ba0.6Sr0.4TiO3 sample. The performed investigations of mechanical properties made it possible to evaluate the usability of this material for manufacturing transducers and sensors which could work under load.

Erratum to “Cerium effect on the phase structure, phase stability and redox properties of Ce-doped strontium ferrates”

2008

Study of low-pressure suspension plasma spray nanostructured coating : structural characteristics and application in solid oxide fuel cell

2021

Suspension plasma spraying (SPS) has attracted more and more attention in terms of the preparation of nanostructured / sub-microstructured ceramic coatings. However, conventional SPS techniques are conducted under atmospheric pressure, which inevitably causes some disadvantages. Recently, a novel suspension spraying technology – low-pressure suspension plasma spraying (LPSPS) – was proposed, in which the sus-pension spraying process is conducted under low environmental pressure. Benefit from the significant impact of low pressure on the coating deposition, LPSPS is expected to improve the disadvantage of SPS as well as to obtain distinct coating structures not achievable in conventional SPS…