Search results for "Chromate"

2017

Abstract Chromic acid anodizing is important for the corrosion protection of aerospace aluminium alloys. Previous study has demonstrated that SO 4 2 − impurity in the chromic acid affects the film growth on aluminium at a voltage of 100 V. The present work further investigates aluminium and extends the study to industrial anodizing conditions (Bengough-Stuart (B-S) process) and to the AA 2024-T3 alloy. It is shown that SO 4 2 − concentrations between ~ 38–300 ppm reduce the film growth rate for aluminium anodized at 100 V in comparison with an electrolyte than contains ≤ 1.5 ppm SO 4 2 − , whereas ~ 1500–3000 ppm SO 4 2 have an opposite effect and lead to an unstable pore diameter. Under th…

Study of the Chemical Conversion of Aluminum Alloys by Coupling CFDE and EQCM

2004

The ability of the channel flow double electrode (CFDE) technique and electrochemical quartz crystal microbalance (EQCM) for studying in situ chromate phosphate conversion coating on 5182 aluminum alloys was explored. It was first demonstrated that aqueous Cr(VI) can be analyzed quantitatively with the CFDE technique by reduction into Cr(III) on a graphite electrode. Samples used for EQCM were quartz plated by physical vapor deposition using a 5182 alloy target, allowing thin layers of aluminum alloys with a similar chemical composition to be obtained. EQCM was adapted in order to account for the hydrodynamic conditions in an industrial process, by placing the quartz in a flow cell. In orde…

Phase behaviour of Ag2CrO4 under compression: Structural, vibrational, and optical properties

2013

We have performed an experimental study of the crystal structure, lattice dynamics, and optical properties of silver chromate (Ag2CrO4) at ambient temperature and high pressures. In particular, the crystal structure, Raman-active phonons, and electronic band gap have been accurately determined. When the initial orthorhombic Pnma Ag2CrO4 structure (phase I) is compressed up to 4.5 GPa, a previously undetected phase (phase II) has been observed with a 0.95% volume collapse. The structure of phase II can be indexed to a similar orthorhombic cell as phase I, and the transition can be considered to be an isostructural transition. This collapse is mainly due to the drastic contraction of the a ax…

Structural Analysis and Photocurrent Spectroscopy of CCCs on 99.99% Aluminum

2003

A characterization of chromate conversion coatings (CCCs) formed in the presence and in the absence of accelerator (ferroferricyanide redox couple) has been performed by various techniques (transmission electron microscopy, TEM, glow discharge optical emission spectrometry, GDOES, X-ray absorption near-end structure, XANES, and photon correlation spectroscopy). The results of a detailed investigation on morphological, compositional, and solid-state properties of freshly converted aluminum samples at different immersion times (30 s-90 min) are reported. The TEM and GDOES data suggest the presence of iron-cyanide species only in the external layer of CCC of nearly constant thickness. The XANE…

Improvement of the electrochemical behaviour of Zn-electroplated steel using regenerated Cr(III) passivation baths

2014

[EN] Conversion coatings based on trivalent chromium are more sensitive to the presence of zinc and iron impurities than the chromate formulations. This fact contributes to a decrease in the quality of passivation and to the generation of a significant amount of hazardous liquid waste. Recently, a new eco-innovative process based on Emulsion Pertraction Technology (EPT) is being implemented at industrial scale for selectively removing Zn and Fe from spent passivation baths in order to enhance the lifetime of the Cr (III) baths. In this study, the effect of Zn and Fe removal on the electrochemical behaviour of Zn-electroplated steel samples was evaluated by means of polarisation curves and e…

Two-Dimensional Assembling of (2,2‘-Bipyrimidine)bis(oxalato)chromate(III) Units through Alkaline Cations

1999

Self-assembling of the tris-chelated [Cr(bpm)(ox)2]- complex with Na+ in aqueous solution leads to the remarkable bimetallic honeycomb layered compound of formula [NaICrIII(bpm)(ox)2]·5H2O (2) (bpm...

Immunologic findings in workers formerly exposed to 2,3,7,8-tetrachlorodibenzo-p-dioxin and its congeners

1998

One hundred ninety-two workers in a German pesticide factory who were exposed to polychlorinated dibenzodioxins and -furans (PCDD/PCDF) were investigated for former and present diseases and laboratory changes of the immune system. Moreover, in a subgroup of 29 highly exposed and 28 control persons, proliferation studies were performed. In addition to assays such as blood count, immunoglobulins, serum electrophoresis, monoclonal bands, surface markers, autoantibodies, and lymphocyte proliferation, two new methods, the rise of tetanus antibody concentration after vaccination and the in vitro resistance of lymphocytes to chromate, were used to diagnose the morphologic and functional state of t…

Magnetic and magneto-optical properties of nickel hexacyanoferrate/chromate thin films

2017

One of the most important challenges of modern science and technology is the quest for novel and tuneable materials, the properties of which can be widely controlled by chemical modifications or external stimuli. Simultaneously, an interest in the development of magnetic thin films also gains significant attention. In the current paper we bring together both these challenges and present a study of a new type of low-dimensional nickel hexacyanoferrate/chromate system. Thin films were obtained by the "layer by layer" deposition technique, where the ratio of Fe/Cr was controlled by the dipping sequence. The scope of this work is a comprehensive analysis of structural, spectroscopic and magneti…

High-pressure transition to the post-barite phase in BaCrO4hashemite

2012

A recent high-pressure study on barium chromate BaCrO${}_{4}$ reported a phase transition but the structure of the high-pressure phase structure could not be identified. This high-pressure phase was suggested to have a monoclinic structure different from other high-pressure forms of $AB$O${}_{4}$-type compounds. In this work, we have carried out x-ray diffraction measurements up to 46 GPa using He as the quasihydrostatic pressure medium and density-functional theory calculations. Our studies allow us to identify the high-pressure phase as the $P$2${}_{1}$2${}_{1}$2${}_{1}$ post-barite-type phase, recently reported for BaSO${}_{4}$. The equations of state of both, the low- and the high-press…

The generalized H-point standard-additions method to determine analytes present in two different chemical forms in unknown matrix samples. Part II. C…

2000

The generalized H-point standard-additions method (GHPSAM) is used in order to obtain the total Cr(VI) and chromate concentration in water samples whose matrices are completely unknown. Moreover, a new methodology, which is a modification of the GHPSAM, is proposed for the simultaneous determination of the two major chemical forms of Cr(VI) present in the sample. The method is based on the location of spectral intervals where the behaviour of the interferent absorbance can be considered as linear. From these intervals, the analyte concentration free from bias error can be estimated. Spiked samples of dig and harbour water measured in the UV–visible spectral region have been tested to check …