Search results for "Chronoamperometry"
showing 10 items of 18 documents
Electrochemical deposition of aniline derivatives for conductometric gas sensors
2019
International audience; Polymer film of poly(2,3,5,6-tetrafluoroaniline) (PTFA) were electroplated on ITO substrate from acidic medium by chronoamperometry. Electrochemical and morphological characterizations were performed and compared to polyaniline properties similarly coated. It seemed that PTFA film had an irreversible redox response with poor conductivity due to the absence of acid-base doping. This film were then incorporated in a patented device called MSDI heterojunction to perform ammonia sensing in humid atmosphere.
Electron transfer mechanism in Shewanella loihica PV-4 biofilms formed at graphite electrode
2012
Abstract Electron transfer mechanisms in Shewanella loihica PV-4 viable biofilms formed at graphite electrodes were investigated in potentiostat-controlled electrochemical cells poised at oxidative potentials (0.2 V vs. Ag/AgCl). Chronoamperometry (CA) showed a repeatable biofilm growth of S. loihica PV-4 on graphite electrode. CA, cyclic voltammetry (CV) and its first derivative shows that both direct electron transfer (DET) mediated electron transfer (MET) mechanism contributes to the overall anodic (oxidation) current. The maximum anodic current density recorded on graphite was 90 μA cm − 2 . Fluorescence emission spectra shows increased concentration of quinone derivatives and riboflavi…
Spatially limited diffusion coupled with ohmic potential drop and/or slow interfacial exchange: a new method to determine the diffusion time constant…
2004
Abstract We have analyzed chronoamperometric curves, I ( t ), after small-amplitude potential steps Δ E (PITT technique) for the model of linear diffusion of a species inside an electroactive film, taking into account ohmic effects in the external media (solution and electrode) as well as a finite rate of the interfacial exchange. For its short-time interval, t ≪ τ d ( τ d is the diffusion time constant, corresponding to unlimited diffusion from the interface), three approximate analytical expressions have been proposed. One of these represents an interpolation formula between the value of the current at the start of the diffusion process, I (0)=Δ E / R ext (after the end of the EDL chargin…
Quantification of electrochromic kinetics by analysis of RGB digital video images
2018
A new, rapid, and practical procedure to obtain quantitative kinetic information of electrochromic materials is proposed. When the transition between two colors on a colored electrode surface is monitorized by digital video, the analysis of pixel color intensity (I) in sequential RGB digital images allows us to precise the half-life time (t1/2) of the color change since a maximum value of the standard deviation of the pixel intensity (σ(I)) is reached. We simulated and analyzed the evolution of standard deviation during an electrochromic transition in different circumstances (kinetic and diffusion control). As an example of application, electrochromic transitions of a thin film model, the P…
Photoelectrocatalysis of paracetamol on Pd–ZnO/ N-doped carbon nanofibers electrode
2021
Abstract The presence of pharmaceuticals in water bodies has become a major concern in recent years. An efficient and innovative way of eliminating these pollutants is through photoelectrocatalytic (PEC) degradation owing to its environmental sustainability and its ability to remove recalcitrant pollutants. In this study, palladium loaded zinc oxide/carbon nanofibers (CZnO–Pd) were employed as a novel photoanode for PEC degradation of paracetamol. The CZnO–Pd composite was prepared through electrospinning and atomic layer deposition (ALD). The obtained materials were characterized. Photoelectrochemical studies were carried out with linear sweep voltammetry and chronoamperometry. The removal…
(Photo)catalyst Characterization Techniques
2019
Abstract This chapter reports on some characterization techniques that are commonly used for catalysts and photocatalysts. Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), UV–visible (UV–Vis), photoluminescence (PL), and electrochemical characterization techniques are presented with experimental details and actual case studies from literature are discussed. The chapter starts with adsorption phenomena on (photo)catalysis and adsorption isotherms are presented. Then BET analysis technique and its applications in (photo)catalysis are explained. Morphological properties (SEM), functional groups, and the interaction of substrate (…
Chronoamperometry of prussian blue films on ITO electrodes: Ohmic drop and film thickness effect
1999
Abstract The chronoamperograms associated with the reduction of prussian blue films deposited onto indium tin oxide (ITO) electrodes to the Everitt’s salt form, are influenced by the ohmic drop effect. These chronoamperometric curves have been simulated by means of a numerical finite difference model which is able to explain their shape and their dependence on the thickness of the film and on the uncompensated resistance. An analytical expression which describes the dependence of current against time at initial times considering the ohmic drop effect has also been proved when applied to these chronoamperometric curves at short times.
Electrochemical performance of activated screen printed carbon electrodes for hydrogen peroxide and phenol derivatives sensing
2019
Screen-printed carbon electrodes (SPCEs) are widely used for the electroanalysis of a plethora of organic and inorganic compounds. These devices offer unique properties to address electroanalytical chemistry challenges and can successfully compete in numerous aspects with conventional carbon-based electrodes. However, heterogeneous kinetics on SPCEs surfaces is comparatively sluggish, which is why the electrochemical activation of inks is sometimes required to improve electron transfer rates and to enhance sensing performance. In this work, SPCEs were subjected to different electrochemical activation methods and the response to H2O2 electroanalysis was used as a testing probe. Changes in to…
An electrochemical quartz crystal microbalance study of lithium insertion into thin films of tungsten trioxide I. Modeling of the ionic insertion mec…
1995
A theoretical description of the mechanism of lithium insertion into amorphous thin films of tungsten trioxide (a-WO3) prepared by thermal vacuum evaporation of WO3 powder is presented. The model developed is based on the experimental results obtained by chronoamperometry and ac impedance spectroscopy associated with electrochemical quartz crystal microbalance (EQCM). The electrode mass change and the current flowing through the electrochemical cell during cathodic polarization are simulta neously recorded. As expected, it can be observed that the insertion process is associated with a gain of mass of the inserted electrode at long times (t > 1 s). On the other hand at short times (t < 1 s)…
Acid versus base peptization of mesoporous nanocrystalline TiO2 films: functional studies in dye sensitized solar cells
2005
We report an analysis of the influence of acid/base conditions employed in the synthesis of TiO2 nanoparticles upon the performance of dye sensitised photoelectrochemical solar cells fabricated from these particles. The functional properties of the TiO2 nanoparticles in these devices are investigated by potential step chronoamperometry, transient laser spectroscopy, and photovoltaic device characterisation. We find that base peptization conditions employed in the sol–gel fabrication of the TiO2 nanoparticles result in a reduction in film electron density under negative applied bias, correlated with slower interfacial recombination losses and a higher device open circuit voltage.