Search results for "Collider"
showing 10 items of 1690 documents
MELISSA: Laser ion source setup at CERN-MEDICIS facility. Blueprint
2019
The Resonance Ionization Laser Ion Source (RILIS) has become an essential feature of many radioactive ion beam facilities worldwide since it offers an unmatched combination of efficiency and selectivity in the production of ion beams of many different chemical elements. In 2019, the laser ion source setup MELISSA is going to be established at the CERN-MEDICIS facility, based on the experience of the workgroup LARISSA of the University Mainz and CERN ISOLDE RILIS team. The purpose is to enhance the capability of the radioactive ion beam supply for end users by optimizing the yield and the purity of the final product. In this article, the blueprint of the laser ion source, as well as the key …
Searching for hidden sectors in multiparticle production at the LHC
2016
Most signatures of new physics in colliders have been studied so far on the transverse plane with respect to the beam direction. In this work however we study the impact of a hidden sector beyond the Standard Model (SM) on inclusive (pseudo)rapidity correlations and moments of the multiplicity distributions, with special emphasis in the LHC results.
Combining data from high-energy p p -reactions and neutrinoless double-beta decay: Limits on the mass of the right-handed boson
2016
From the recently established lower-limits on the nonobservability of the neutrinoless double-beta decay of 76Ge (GERDA collaboration) and 136Xe (EXO-200 and KamLAND-Zen collaborations), combined with the ATLAS and CMS data, we extract limits for the left-right (LR) mixing angle, of the SU(2)L ×SU(2)R electroweak Hamiltonian. For the theoretical analysis, which is a model dependent, we have adopted a minimal extension of the Standard Model (SM) of Electroweak Interactions belonging to the SU(2)L ×SU(2)R representation. The nuclear-structure input of the analysis consists of a set of matrix elements and phase-space factors, and the experimental lower-limits for the half-lives. The other inpu…
Resonance ionization schemes for high resolution and high efficiency studies of exotic nuclei at the CRIS experiment
2019
© 2019 This paper presents an overview of recent resonance ionization schemes used at the Collinear Resonance Ionization Spectroscopy (CRIS) setup located at ISOLDE, CERN. The developments needed to reach high spectral resolution and efficiency will be discussed. Besides laser ionization efficiency and high resolving power, experiments on rare isotopes also require low-background conditions. Ongoing developments that aim to deal with beam-related sources of background are presented. ispartof: Nuclear Instruments & Methods In Physics Research Section B-Beam Interactions With Materials And Atoms vol:463 pages:398-402 ispartof: location:SWITZERLAND, CERN, Geneva status: published
Production of molecular sideband radioisotope beams at CERN-ISOLDE using a Helicon-type plasma ion source
2013
In order to account for the increasing demand for strong molecular beams for nuclear physics experiments at ISOLDE, a new radioactive ion source concept based on an RE discharge in a magnetized plasma was developed at CERN. Experimental studies at the ISOLDE offline separator show that the optimum conditions for CO+ and CO2+ ion production are given when the ion source is operated with He plasma, in line with expectations based on their electron impact ionization cross-sections. At optimum tuning, ionization efficiencies of 2.5% and 4% were measured for CO+ and Ar+, respectively. The capability of the Helicon ion source prototype for ISOL operation was evaluated during two online runs at th…
First measurement of f′2 (1525) production in Z0 hadronic decays
1996
The inclusive production of the f(2)'(1525) in hadronic Z(0) decays has been studied in data collected by the DELPHI detector at LEP. The Ring Imaging Cherenkov detectors were important tools in the identification of the decay f(2)'(1525) --> K+K-. The average number of f(2)(')(1525) produced per hadronic Z decay, [f(2)'] = 0.020 +/- 0.005 (stat) +/- 0.006 (syst), and the momentum distribution of the f(2)'(1525) have both been measured. The mass and width of the f(2)'(1525) are found to be [M(f2)'] = 1535 +/- 5 (stat) +/- 4 (syst) MeV/c(2). [Gamma(f2)'] = 60 +/- 20 (stat) +/- 19 (syst) MeV/c(2)
The REX-ISOLDE project
1998
Abstract REX-ISOLDE [1] is an experiment at ISOLDE/CERN with a twofold aim: (i) to demonstrate a novel efficient scheme for the acceleration of radioactive ions from the online mass separator ISOLDE to energies around the Coulomb barrier. (ii) to perform first nuclear physics experiments by studying the structure of the neutron-rich (N = 20, N = 28) nuclei by Coulomb excitation and neutron transfer reactions. An overview on the different components of the radioactive beam accelerator is given with special emphasis on the separation possibilities and ion number capabilities of the system.
First laser ions at an off-line mass separator of the ISAC facility at TRIUMF
2004
For efficient and in particular for selective production of radioactive ion beams at on-line mass separator facilities the technique of resonance ionization laser ion sources (RILIS) has become the most powerful tool. In facilities like ISOLDE at CERN they nowadays represent the most commonly used type of ion source for rare short-lived isotopes, delivering highest suppression of isobaric contaminations. For a first off-line demonstration preparing the development and installation of such a laser ion source at the new ISAC facility at TRIUMF in Vancouver (Canada), an all solid state laser system developed at the University of Mainz (Germany), was transferred and tested there at an off-line …
Data acquisition, remote control and equipment monitoring for ISOLDE RILIS
2013
Abstract With a steadily increasing on-line operation time up to a record 3000 h in the year 2012, the Resonance Ionization Laser Ion Source (RILIS) is one of the key components of the ISOLDE on-line isotope user facility at CERN. Ion beam production using the RILIS is essential for many experiments due to the unmatched combination of ionization efficiency and selectivity. To meet the reliability requirements the RILIS is currently operated in shift duty for continuous maintenance of crucial laser parameters such as wavelength, power, beam position and timing, as well as ensuring swift intervention in case of an equipment malfunction. A recent overhaul of the RILIS included the installation…
Towards higher accuracy with the ISOLTRAP mass spectrometer
1996
To now the masses of more than hundred unstable isotopes have been determined with the ISOLTRAP mass spectrometer installed at ISOLDE/CERN. Typically a resolving power of mΔm ≈ 1 × 106 was used and the mass determinations were assigned an accuracy of δmm ≈ 1 × 10−7. We show that with improvements to ISOLTRAP and refinements of the experimental technique an accuracy of δmm ≈ 3 × 10−8 can be obtained.