Search results for "Composite"
showing 10 items of 4584 documents
Sb Effect on Structural, Dielectric, and Ferroelectric Properties of Na0.5K0.5NbO3Ceramics
2015
Lead-free Na0.5K0.5(Nb1-xSbx)O3 (0<x<0.05) ceramics were fabricated by the solid-state reaction method and materials with more than 95% densification were obtained. A microstructure study confirms that the ceramics are well sintered. All compositions show complete perovskite solid solutions. Structural, dielectric and ferroelectric investigations for these specimens were performed. X-ray measurements showed that all compositions have a single perovskite structure with orthorhombic symmetry. Dielectric study revealed that the ceramics obtained are normal ferroelectrics. However some signs of diffuse phase transition were observed. The transition temperatures and the maximum electric permitti…
Uniaxial stress dependence of the dielectric and ferroelectric properties of the Na0.5K0.5NbO3and Na0.5K0.5NbO3 + 0.5 mol%MnO2ceramics
2013
Na0.5K0.5NbO3 and Na0.5K0.5NbO3 + 0.5 mol%MnO2 lead-free ceramics have been produced by solid phase hot pressing sintering process at 1120–1145°C. The results of the X-ray diffraction measurements showed that the obtained samples possessed a perovskite structure. The micrograph of the fractured surface showed a dense ceramic structure, in compliance with 93% relative density determined by the Archimedes method. The dependence of dielectric and ferroelectric properties on the uniaxial compressive stress (0–3000 bar) of the Na0.5K0.5NbO3 and Na0.5K0.5NbO3 + 0.5 mol%MnO2 ceramics was investigated. Significant influence of the external stress on these properties was revealed. It includes a shif…
Influence of Compressive Stress on Dielectric and Ferroelectric Properties of the Na0. 5K0.5NbO3, Na0.5K0.5(Nb0.94Sb0.06)O3and Na0.5K0.5(Nb0.94Sb0.06…
2013
Good quality lead-free ceramics of Na0.5K0.5NbO3, Na0.5K0.5(Nb0.94Sb0.06)O3 and Na0.5K0.5(Nb0.94Sb0.06)O3 +0.5mol%MnO2 have been produced by a solid phase hot pressing sintering process at 1120–1145°C. The dependence of dielectric and ferroelectric properties on the uniaxial pressure (0–3000 bar) of the these samples was investigated, revealing a significant influence of the external stress on their properties. This includes a shift of the phase transition, a diffuseness of the permittivity characteristics, a change of the dielectric dispersion and a decrease of the polarization. We discuss our results based on hardening of the soft-mode and domain switching processes under applying of pres…
The physical mechanisms of relaxation times distribution in inorganic and organic disordered ferroelectrics
2007
Abstract We discuss the physical background for relaxation times distribution in organic and inorganic disordered ferroelectrics. We show that such background is a disorder which is believed to be a reason for relaxor behavior. Due to this disorder the internal electric and elastic fields are of a random nature being characterized by certain distribution function. Having the distribution function f ( E ) of random field E , we can obtain the distribution function of relaxation times F ( τ ) with the help of relation between τ and E . Latter relation can be obtained considering the dynamics of a single electric dipole in a random field created by the ensemble of defects and impurities in a s…
ZrTiO4 materials obtained by spark plasma reaction-sintering
2014
Zirconium titanate (ZrTiO4), have many attractive properties such as high resistivity, high dielectric constant, high permittivity at microwave frequencies and excellent temperature stability for microwave properties. Zirconium titanate dense materials are proposed for many structural applications, but fully reacted and completely dense pieces are difficult to obtain by conventional routes. In this work, fully dense zirconium titanate materials (∼98%) were obtained at lower temperatures (1300-1400 C) and short processing time by non-conventional technique; spark plasma-reaction sintering (SPRS). Homogeneous and stable starting powders mixture with the adequate composition was prepared from …
INFLUENCE OF ZIRCONIUM ON STRUCTURAL, MICROSTRUCTURAL AND FERROELECTRIC PROPERTIES OF BaZr0.20Ti0.80O3 CERAMIC
2009
ABSTRACT Barium zirconium titanate BaZrxTi1-xO3 ceramics have been obtained by conventional method. The X-ray diffraction analysis showed that the BaZr0.20Ti0.80O3 crystallizes in the cubic structure. The lattice parameter a increases with temperature, at temperature ∼308 K a small deviation is observed. The performed EDS study revealed that the samples were perfectly sintered and that the material was chemically homogeneous. It contains a little glassy phase and the grains are well shaped. The zirconium content (20 mol%) in the examined solid solution caused downward shift of the temperature T m . The increase of the achieved permittivity values ϵm was observed as well.
Chiral polyisocyanates, a special class of helical polymers
2001
Abstract Polyisocyanates (nylon 1) offer a lot of fascinating properties due to their dynamic helical conformation, which gives rise to orientational phenomena (large persistence length) or chiral amplification. This paper summarizes new results on polyisocyanates that appeared after the review by Bur and Fetters [Chem Rev 76 (1976) 727]. It starts with an overview of new synthetic methods, and then describes chiral polyisocyanates, their properties and the theoretical concepts developed to understand the experimental findings. Thereafter concentrated solutions (gels and LC phases) as well as photochromic polyisocyanates are discussed in detail. Finally, solid phase composite materials from…
Bending or buckling: Compression-induced phase transition in a semi-flexible polymer brush
2013
Molecular-dynamics simulations are presented for systems of densely grafted semiflexible macromolecules grafted to a planar non-adsorbing substrate, studying the case where the persistence length of the polymers is of the same order as their contour length so that the polymer brush may exhibit nematic order. We focus our attention on the case where the first bond must orient perpendicularly to the substrate (so the structure resembles a "Fakir's bed" for short chains and a "polymer bristle" for longer chains). When such layers are exposed to uniform compression, the pressure vs. distance relationship exhibits two stages: i) for very small compression the chains exhibit "buckling" yet mainta…
Propolis-Based Nanofiber Patches to Repair Corneal Microbial Keratitis
2021
In this research, polyvinyl-alcohol (PVA)/gelatin (GEL)/propolis (Ps) biocompatible nanofiber patches were fabricated via electrospinning technique. The controlled release of Propolis, surface wettability behaviors, antimicrobial activities against the S. aureus and P. aeruginosa, and biocompatibility properties with the mesenchymal stem cells (MSCs) were investigated in detail. By adding 0.5, 1, and 3 wt.% GEL into the 13 wt.% PVA, the morphological and mechanical results suggested that 13 wt.% PVA/0.5 wt.% GEL patch can be an ideal matrix for 3 and 5 wt.% propolis addition. Morphological results revealed that the diameters of the electrospun nanofiber patches were increased with GEL (from…
Der Einfluss von Wechselströmen verschiedener Stärke auf die Antibiotikaproduktion durch Schimmelpilze in Oberflächenkulturen
1952
Low alternating currents between 8 and 50 mA have a stimulating effect on the production of antibiotics by moulds in surface cultures using the medium ofVincent. Small differences of current intensity at low ranges cause no principally different results. The production of all antibiotics formed by the same species of mould is increased under the influence of low alternating currents.