Search results for "Composite"
showing 10 items of 4584 documents
Microstructural study of titanium carbonitride elaborated by combustion synthesis
2007
Abstract The self-propagating high-temperature synthesis (S.H.S.) process, which is promising for the fabrication of ceramic materials, was chosen to elaborate titanium carbonitride materials. The influence of parameters such as nitrogen gas pressure and carbon ratio on the microstructure was studied. A single phase product of Ti(C,N) is obtained for a carbon ratio under 15 at.% and a nitrogen pressure of 36 MPa. The increase of the carbon ratio corresponds to a decrease of the maximum temperature reached during the synthesis. Time resolved X-ray diffraction measurements (TRXRD) with the synchrotron radiation were used to determine the reaction mechanisms. We could observe that the synthesi…
Computational simulations on the binding and reactivity of a nitrile inhibitor of the SARS-CoV-2 main protease.
2021
We present a detailed computational analysis of the binding mode and reactivity of the novel oral inhibitor PF-07321332 developed against the SARS-CoV-2 3CL protease. Alchemical free energy calculations suggest that positions P3 and P4 could be susceptible to improvement in order to get a larger binding strength. QM/MM simulations unveil the reaction mechanism for covalent inhibition, showing that the nitrile warhead facilitates the recruitment of a water molecule for the proton transfer step.
Chain-extending of Hydroxytelechelic Polybutadiene: Synthesis and Characterization
2010
Extension of hydroxytelechelic polybutadiene oligomers ( 3200 g/mol) is performed in mild conditions, in order to avoid backbone modifications, using succinic anhydride or methylenedicyclohexyl diisocyanate. The two routes present significative extension of the initial oligomers. Extension through the anhydride route, in the presence of DCC and DMAP, leads to new hydroxytelechelic oligomers ( 8000 g/mol). Extension through the diisocyanate route, catalyzed by DBTL at 65°C leads to hydroxytelechelic oligomers of higher average molecular weight ( 20000 g/mol). New materials are characterized by FTIR/1H-NMR and changes in their Tg according to , are discussed. The influence of reaction time on…
Toward more realistic viscosity measurements of tyre rubber–bitumen blends
2014
AbstractThe measurement of rheological properties of the tyre rubber bitumen blends is often challenging due to presence of suspended tyre rubber’s crumbs. Furthermore, the phase separation during the course of measurements makes the viscosity of these non-homogeneous blends difficult to ascertain. In this study, a new dual helical impeller was designed and manufactured to be used with a rotational viscometer in order to have a real-time control of the viscosity while performing a laboratory mixing of the blends. Layer based manufacturing techniques showed to be a convenient method to produce complex shaped impeller prototypes before manufacturing the more expensive stainless steel assembly…
Optimisation of liquid rubber modified bitumen for road pavements and roofing applications
2020
Abstract Polymer Modified Bitumens (PMBs) are largely used for pavement and roofing membranes applications with Styrene-Butadiene-Styrene Block copolymer (SBS) playing a major role in both markets despite its constantly increasing price due to the rising demand for quality bitumen modifiers. On the other hand, there is an increasing trend of recycling end of life tyres generating Recycled Tyre Rubber (RTR) at affordable price. This investigation aims at engineering a modified bitumen with a combination of Liquid Rubber (LR), a homogeneous blend of 50–70% RTR pre-processed in combination with heavy oils, and a wax denominated Ethylene Bis Stearamide (EBS). In the first phase, the effect of L…
A chemical and electrochemical multivalent memory made from FeNi3-graphene nanocomposites
2014
FeNi3-graphene nanocomposites present in acetonitrile solutions a redox couple with an electrochemical hysteresis of 2.4 V between the oxidation and the reduction maxima. In view of the high energy required for the reverse transitions, they are here proposed as chemical multilevel memories: permanent, after drying, or erasable in electrolytes, respectively. Keywords: FeNi3-graphene nanocomposites, Voltammetry, Coulovoltammetry, Redox couple, Redox hysteresis
(Table 1) Sea surface temperature reconstruction for eastern equatorial Pacific surface sediment samples
2012
Significant uncertainties persist in the reconstruction of past sea surface temperatures in the eastern equatorial Pacific, especially regarding the amplitude of the glacial cooling and the details of the post-glacial warming. Here we present the first regional calibration of alkenone unsaturation in surface sediments versus mean annual sea surface temperatures (maSST). Based on 81 new and 48 previously published data points, it is shown that open ocean samples conform to established global regressions of Uk'37 versus maSST and that there is no systematic bias from seasonality in the production or export of alkenones, or from surface ocean nutrient concentrations or salinity. The flattening…
Mixed finite elements for nonlocal elastic multilayered composite plate refined theories
2020
Abstract A novel mixed finite element formulation for the layerwise analysis of nonlocal multilayered composite plates is presented. The finite elements are formulated starting from the weak form of a set of governing equations for the laminate layers that were deduced via the Reissner Mixed Variational Theorem. The primary variables, namely displacements and out-of-plane stresses, are expressed at layer level as through-the-thickness expansions of suitable selected functions with coefficients approximated by the finite element scheme. The through-the-thickness expansion order is considered as a free parameter. This way, finite elements for different refined higher order plate theories can …
Interaction of oxygen with Mo(100), Mo(110), and Mo(111) surfaces. RHEED and AES analyses of the molybdenum oxide nucleation and growth
1991
Abstract A study of the nucleation and growth of MoO 3 generated by interaction of oxygen with Mo(100), Mo(110), and Mo(111) single crystalline surfaces is investigated at high oxygen pressure (10 4 Pa) and low temperature (620 to 820 K). The results of RHEED and AES analyses prove that under these oxidation conditions, MoO 3 nucleates directly from the metal without intermediate formation of MoO 2 or nonstoichiometric molybdenum oxide such as Mo 4 O 11 . The structure and orientation of MoO 3 nuclei are characterized in relation with the parent molybdenum surface. On the Mo(110) and Mo(111) surfaces, which are faceting, the nucleation and growth of MoO 3 takes place by successive structura…
A preliminary comparison between finite element and meshless simulations of extrusion
2009
In this paper the extrusion process of a cross-shaped profile was investigated. In particular, the study was focused on the distortion of extruding profiles when the workpiece and die axis are not aligned. The process was simulated using the finite element method (FEM) and the natural element method (NEM), both implemented in an updated-Lagrangian formulation, in order to avoid the burden associated with the description of free surfaces in ALE or Eulerian formulations. Furthermore, an experimental equipment was developed in order to obtain reliable data in terms of deformed entity, required process load and calculated pressure. At the end, a comparison between the numerical predictions and …