Search results for "Composites"
showing 10 items of 1905 documents
Study on the initial stages of water corrosion of fluorozirconate glasses
2004
Abstract The surface corrosion process associated with the hydrolysis of fluorozirconate glass, ZBLAN (53ZrF 4 , 20BaF 2 , 20NaF, 4LaF 2 , 3AlF 3 ) was investigated using X-ray photoelectron spectroscopy (XPS), grazing-incidence small angle X-ray scattering (GISAXS), X-ray reflectivity (XRR) and scanning electron microscopy (SEM). After a short exposure period (25 min) of the glass surface to deionized water the XPS data indicate an increase of the oxygen content accompanied by a decrease of fluorine concentration. The analysis of the chemical bonding structure identified the predominant surface reaction products as zirconium hydroxyfluoride and oxyfluoride species. The second most abundant…
Microstructure of Fe–ZrSiO4 solid solutions prepared from gels
2012
Abstract Microstructural changes associated with chemical and structural evolution from gels to Fe x –ZrSiO 4 solid solutions are reported. Mineralizer-free Fe x –ZrSiO 4 gels in the compositional range 0 ≤ x ≤ 0.15 were prepared by sol–gel liquid-phase route from mixtures of alkoxides of silicon and zirconium, and iron (III) acetylacetonate, and annealed at different temperatures and/or times. The first step on the whole process to the final Fe x –ZrSiO 4 solid solutions was the formation of aggregated of tetragonal Fe-doped ZrO 2 nanocrystals with diameters smaller than 50 nm. At this stage the tetragonal Fe–ZrO 2 were embedded in amorphous silica resulting nanocomposite materials. The …
Synthesis and characterization of V2O5SiO2ZrO2 pigments by sol-gel method
1992
Abstract Polymeric gels in the V2O5 SiO2 ZrO2 system were prepared from tetraethylorthosilicate (TEOS), zirconium(IV)-n-propoxide and vanadium(IV) oxyacetylacetonate, precursors. The effects of prehydrolysis time of TEOS and drying gel method on the stabilization of tetragonal zirconia in the silica amorphous matrix, nucleation and growth of the zircon (ZrSiO4) phase, and stabilization of the blue and green stains of vanadium zircon were studied. Results provide evidence that long time of prehydrolysis and fast drying do not favour zircon crystallization but stabilize the tetragonal zirconia in the amorphous matrix.
Microstructural Evolution from Praseodymium-Containing Zircon Gels to Prx-ZrSiO4 Solid Solutions
2012
Structural evolution and coupled microstructural transformations occurred on annealing mineralizer-free Pr-containing ZrSiO4 gels up to final praseodymium-doped zircon yellow pigments are reported. Gels with nominal compositions Prx-ZrSiO4, 0 ≤ x ≤ 0.125, were prepared from mixtures of zirconium and silicon alkoxides and praseodymium acetylacetonate. Crystallization pathway and microstructural changes of thermally treated dried gels were followed by infrared spectroscopy, X-ray diffraction, field emission scanning and transmission electron microscopies, respectively. Results indicated that the crystallization pathway through the whole process of final Prx-ZrSiO4 solid solutions formation di…
Synthesis and characterization of praseodymium-containing ZrSiO4 solid solutions from gels
2011
Abstract The preparation and characterization of a series of praseodymium–zircon solid solution (Prx–ZrSiO4) materials with increasing nominal amounts of Pr is reported. Pr-doped zircon gels were prepared by gelling mixtures of zirconium n-propoxide, praseodymium acetylacetonate and tetraethylorthosilicate, and annealed over the range of temperature up to the formation of Pr–zircon solid solutions. The reaction sequence was followed by X-ray powder diffraction (XRD), ultraviolet–visible diffuse reflectance (DR) and infrared spectroscopy (IR). The first crystalline phase detected on annealing gels was a tetragonal praseodymium-containing ZrO2 phase (t-Pr–ZrO2). On further annealing, the subs…
A physical-based constitutive model for surface integrity prediction in machining of OFHC copper
2017
International audience; Due to the rising interest in predicting machined surface integrity and sustainability, various models for metal cutting simulation have been developed. However, their accuracy depends deeply on the physical description of the machining process. This study aims to develop an orthogonal cutting model for surface integrity prediction, which includes a physical-based constitutive model of Oxygen Free High Conductivity (OFHC) copper. This constitutive model incorporates the effects of the state of stress and microstructure on the work material behavior, as well as a dislocation density-based model for surface integrity prediction. The coefficients of the constitutive mod…
Prise en eau par composites carbone/époxy et leur effet sur le comportement mécanique : application aux réparations de structures en composite par co…
2013
Le travail présenté dans ce mémoire avait pour objectif d’étudier le processus de la pénétration d'eau dans les composites en carbone/époxyde dans un premier temps, et dans un deuxième temps, d’étudier l’effet de la prise en eau par ces matériaux sur les performances mécaniques des composites et leur joints collés. L'intégration de ces phénomènes physiques dans la modélisation numérique est d'une grande importance dans la prédiction de la durabilité d’une structure en composite subissant un vieillissement hygrothermique. Par conséquent, ce travail consiste non seulement en des observations expérimentales, mais aussi en des simulations numériques. Des corrélations entre les résultats obtenus…
Flash microwave synthesis and sintering of nanosized La0.75Sr0.25Cr0.93Ru0.07o3–δ for fuel cell application.
2009
International audience; Perovskite-oxide nanocrystals of La0.75Sr0.25Cr0.93Ru0.07O3–δ with a mean size around 10 nm were prepared by microwave flash synthesis. This reaction was performed in alcoholic solution using metallic salts, sodium ethoxide and microwave autoclave. The obtained powder was characterised after purification by energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), BET adsorption technique, photon correlation spectroscopy (PCS) and transmission electron microscopy (TEM). The results show that integrated perovskite-type phase and uniform particle size were obtained in the microwave treated samples. At last the synthesised powder was directly used in a sin…
ZnO(core)/TiO2(shell) composites : influence of TiO2 microstructure, N-doping and decoration with Au nanoparticles on photocatalytic and photoelectro…
2017
The aim of the thesis is to study the influence of microstructure of ZnO/TiO2 composites on their properties in photocatalytic degradation of organic pollutants, and in photoassisted water oxidation. To realize such study we chose the design based on ZnO nanorods supported on ITO (Indium Tin Oxide)-coated glass electrode. The ZnO nanorods were then covered with a layer of TiO2 under different conditions. The composition and microstructure of the obtained ZnO(core)/TiO2(shell) composites were modified in the aim to elucidate how these parameters influence their photocatalytic activity. The results of studies lead to elaboration of two most distinctive variants of sol-gel procedure that allow…
Détection d'endommagement dans les composites à l'aide des micro-ondes. Comparaison avec la thermographie infrarouge
2011
International audience; On compare dans cette étude deux méthodes de détection d'endommagement dans les composites : une basée sur la technologie des structures propagatives électromagnétiques dans la gamme des micro-ondes et l'autre basée sur la mesure de champs thermiques dans la gamme des infrarouges. Toutes deux sont appliquées à la détection des ruptures de fibres et du délaminage dans des composites fibres/résine de type verre/époxy et carbone/époxy.