Search results for "Composites"
showing 10 items of 1905 documents
Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s
2021
Recently, significant events took place that added immensely to the sociotechnical pressure for developing sustainable composite recycling solutions, namely (1) a ban on composite landfilling in Germany in 2009, (2) the first major wave of composite wind turbines reaching their End-of-Life (EoL) and being decommissioned in 2019–2020, (3) the acceleration of aircraft decommissioning due to the COVID-19 pandemic, and (4) the increase of composites in mass production cars, thanks to the development of high volume technologies based on thermoplastic composites. Such sociotechnical pressure will only grow in the upcoming decade of 2020s as other countries are to follow Germany by limiting and ba…
Lignin from steam‐exploded wood as binder in wood composites
2010
A study demonstrating the approach of zero‐waste technologies, a component of the Zero Emissions concept, and using lignin extracted from steam‐exploded wood as adhesive in hot‐pressed fibre boards and plywood to substitute phenol‐formaldehyde resins is reported. Properties of sample boards containing different amount of lignin adhesive are compared between themselves and with the EU standards for fibre boards. A strong correlation of density and form stability under humid conditions with the lignin content is found. Results of testing mechanical properties of the boards suggest that effect of lignin on mechanical strength depends on the size of particles and hot‐pressing temperature. Steam…
XRD microstructural analysis of mullites obtained from kaolinite–alumina mixtures
2000
Abstract A microstructural study of mullite obtained by the reaction sintering of kaolinite–α–alumina mixtures in the range 1150–1700°C has been performed by using X-ray line profile analyses together with scanning and transmission electron microscopy equipped with microanalysis by energy dispersion (SEM-EDS, TEM-AEM). Two kinds of morphology corresponding to primary (elongated grains) and secondary (equiaxed grains) mullite have been observed. A bimodal crystallite size distribution has been detected through XRD microstructural analysis from 1300°C. The results obtained by this method are compared with SEM/TEM data.
Conformational polymorphs of 1,1,2,2-tetrachloroethane: pressure vs. temperature.
2011
Directional Cl···Cl type I and II interactions govern the low-density aggregation of 1,1,2,2-tetrachloroethane molecules in synclinal conformation in the crystalline state at low temperature, whereas the dense molecular packing in high-pressure is achieved for the antiperiplanar conformers and electrostatically less favored Cl···Cl contacts. The mechanism of transformation between loose and dense associations involves the collapse of Cl···Cl contacts and conformational conversion.
Introducing an amine functionality at the block junction of amphiphilic block copolymers by anionic polymerization strategies
2011
A series of block copolymers bearing a single amino in-chain functionality was synthesized via anionic polymerization of styrene and ethylene oxide. By means of both a conventional and a continuous setup, living polystyrene was quantitatively end functionalized with an oxirane (DBAG) prior to the polymerization of the poly(ethylene oxide) segment. The in-chain amine was conjugated with a fluorescent dye.
Crucial dependence of excimer laser toughness of “wet” silica on excess oxygen
2011
Creation of point defects by ArF (6.4 eV) and F2 laser (7.9 eV) irradiation in synthetic “wet” silica glass thermally loaded with interstitial O2 molecules was studied by optical absorption, electron paramagnetic resonance and infrared absorption. The presence of excess oxygen caused a significant increase of laser-induced ultraviolet (UV) absorption, which was 4 times (7.9 eV-irradiation) and > 20 times stronger (ArF irradiation) as compared to O2-free samples. The spectral shape of photoinduced absorption nearly completely coincided with the spectral shape of oxygen dangling bonds (NBOHC) in 3 to 6.5 eV regions. The contribution of Si dangling bonds (E' centers) was less than few % and wa…
An experimental study of dynamic behaviour of graphite polycarbonatediol polyurethane composites for protective coatings
2013
Segmented polycarbonatediol polyurethane (PUPH) has been synthesized and modified with different amounts of graphite conductive filler (from 0 to 50 wt%). Thermal and dynamical thermal analysis of the composites clearly indicates changes in the polyurethane relaxations upon addition of graphite. Broadband dielectric spectroscopy has been used to study the dielectric properties of the (PUPH) and one composite in the frequency range from 10−2 to 107 Hz and in the temperature window of −140 to 170 ◦C. Relaxation processes associated with different molecular motions and conductivity phenomena (Maxwell–Wagner–Sillars and electrode polarization) are discussed and related to the graphite content
The Reinforcement Effect of Strain Gauges Embedded in Low Modulus Materials
2013
The reinforcement effect of electrical resistance strain gauges is well-described in the literature, especially for strain gauges installed on surface. This paper considers the local reinforcement effect of strain gauges embedded within low Young modulus materials. In particular, by using a simple theoretical model, already used for strain gauges installed on the surface, it proposes a simple formula that allows the user to evaluate the local reinforcement effect of a generic strain gauge embedded on plastics, polymer composites, etc. The theoretical analysis has been integrated by numerical and experimental analyses, which confirmed the reliability of the proposed model.
On the effectiveness of Finite Element simulation of orthogonal cutting with particular reference to temperature prediction
2007
Abstract Finite Element simulation of orthogonal cutting is nowadays assuming a large relevance; in fact a very large number of papers may be found out in technical literature on this topic. In recent years, numerical simulation was performed to investigate various phenomena such as chip segmentation, force prediction and tool wear. On the other hand, some drawbacks have to be highlighted; due to the geometrical and computational complexity of the updated-Lagrangian formulation mostly used in FE codes, a cutting time of only a few milliseconds can be effectively simulated. Therefore, steady-state thermal conditions are not reached and the simulation of the thermal phenomenon may be ineffect…
Micro and macro mechanical characterization of friction stir welded Ti–6Al–4V lap joints through experiments and numerical simulation
2013
Abstract Lap joints of Ti–6Al–4V were produced and the effect of the main process parameters was studied through macro and micro investigations highlighting mechanical resistance, microhardness profiles, grain size and phase distributions. A dedicated numerical model was used to link the input process parameters to temperature and strain distributions and to the final microstructure in the welded joint. It is found that the strain produced in the stir zone by proper combination of process parameters plays a fundamental role in the final microstructure and mechanical properties of the joints.