Search results for "Compres"

showing 10 items of 1107 documents

Calibration of a knock prediction model for the combustion of a gasoline-natural gas mixture

2009

Gaseous fuels, such as Liquefied Petroleum Gas (LPG) and Natural Gas (NG), thank to their good mixing capabilities, allow complete and cleaner combustion than normal gasoline, resulting in lower pollutant emissions and particulate matter. Moreover natural gas, which is mainly constituted by methane, whose molecule has the highest hydrogen/carbon ratio, leads also to lower ozone depleting emissions. The authors in a previous work (1) experienced the simultaneous combustion of gasoline and natural gas in a bi-fuel S.I. engine, exploiting so the high knock resistance of methane to run the engine with an ‘overall stoichiometric’ mixture (thus lowering fuel consumption and emissions) and better …

Waste managementChemistrybusiness.industryHomogeneous charge compression ignitionknock prediction double-fuel S.I. engineSettore ING-IND/08 - Macchine A FluidoInternal combustion engineFuel gasNatural gasEngine efficiencyCompression ratioOctane ratingGasolinebusiness
researchProduct

Integrated plasmonic waveguides: A mode solver based on density of states formulation

2009

International audience; We express the density of states (DOS) near guided resonances of plasmonic waveguides by using multiple-scattering theory. In direct analogy with the case of localized electronic defect states in condensed matter, we demonstrate that optical DOS variations follow a lorentzian profile near guided modes resonances. The lorentzian shape gives quantitative information on the guided modes (effective index, propagation length, and polarization state). We numerically investigate both leaky and bound (lossy) modes supported by dielectric-loaded surface-plasmon-polariton waveguides.

Wave propagationPhysics::Optics02 engineering and technologyLossy compression01 natural sciences0103 physical sciences[SPI.NANO]Engineering Sciences [physics]/Micro and nanotechnologies/Microelectronics010306 general physicsQuantum wellPhysics[PHYS.PHYS.PHYS-OPTICS]Physics [physics]/Physics [physics]/Optics [physics.optics]Mesoscopic physics[ PHYS.PHYS.PHYS-OPTICS ] Physics [physics]/Physics [physics]/Optics [physics.optics]Condensed matter physicsSolver021001 nanoscience & nanotechnologyCondensed Matter PhysicsPolarization (waves)3. Good healthElectronic Optical and Magnetic MaterialsComputational physics[SPI.OPTI]Engineering Sciences [physics]/Optics / PhotonicQuasiparticleDensity of states[ SPI.NANO ] Engineering Sciences [physics]/Micro and nanotechnologies/Microelectronics[ SPI.OPTI ] Engineering Sciences [physics]/Optics / Photonic0210 nano-technology
researchProduct

A Brief Review of the Effects of Pressure on Wolframite-Type Oxides

2018

In this article, we review the advances that have been made on the understanding of the high-pressure (HP) structural, vibrational, and electronic properties of wolframite-type oxides since the first works in the early 1990s. Mainly tungstates, which are the best known wolframites, but also tantalates and niobates, with an isomorphic ambient-pressure wolframite structure, have been included in this review. Apart from estimating the bulk moduli of all known wolframites, the cation–oxygen bond distances and their change with pressure have been correlated with their compressibility. The composition variations of all wolframites have been employed to understand their different structural phase …

WolframitePhase transitioncrystal structureMaterials sciencePhononGeneral Chemical Engineeringband structurephonons02 engineering and technologyengineering.materialType (model theory)01 natural scienceswolframiteInorganic Chemistrysymbols.namesake0103 physical scienceslcsh:QD901-999General Materials Science010306 general physicsElectronic band structureCiència dels materials021001 nanoscience & nanotechnologyCondensed Matter Physicsphase transitionshigh pressureChemical physicsHigh pressureengineeringCompressibilitysymbolsCristallslcsh:Crystallography0210 nano-technologyRaman spectroscopyCrystals
researchProduct

Understanding the Impact of Trampling on Rodent Bones

2022

Experiments based on the premise of uniformitarism are an effective tool to establish patterns of taphonomic processes acting either before, or after, burial. One process that has been extensively investigated experimentally is the impact of trampling to large mammal bones. Since trampling marks caused by sedimentary friction strongly mimic cut marks made by humans using stone tools during butchery, distinguishing the origin of such modifications is especially relevant to the study of human evolution. In contrast, damage resulting from trampling on small mammal fossil bones has received less attention, despite the fact that it may solve interesting problems relating to site formation proces…

Wonderwerk CaveBone compression[SHS.ARCHEO]Humanities and Social Sciences/Archaeology and PrehistoryMicrofaunaEarth and Planetary Sciences (miscellaneous)Experimental taphonomyPaleontologíaEarth-Surface Processes
researchProduct

Mathematical modelling of alternating electromagnetic and hydrodynamic fields, induced by bar type conductors in a cylinder

2009

The heating of buildings by ecologically clean and compact local devices is an interesting and actual problem. One of the modern areas of applications developed during last ten years is an effective usage of electrical energy by alternating current to produce heat energy. This work presents the mathematical model of one of such devices. It is a finite cylinder with viscous incompressible liquid and with metal electrodes of the form of bars placed parallel to the cylinder axis in the liquid. These conductors are connected to the alternating current. First published online: 14 Oct 2010

Work (thermodynamics)Bar (music)Electric potential energyelectrically conducting liquidMechanicslaw.inventionPhysics::Fluid DynamicsClassical mechanicslawModeling and SimulationQA1-939CompressibilityCylinderNavier-Stokes equationsAlternating currentNavier–Stokes equationsalternating currentElectrical conductorMathematicsAnalysisMathematicsMathematical Modelling and Analysis
researchProduct

PrVO$_4$ under High Pressure: Effects on Structural, Optical and Electrical Properties

2020

In pursue of a systematic characterization of rare-earth vanadates under compression, in this work we present a multifaceted study of the phase behavior of zircon-type orthovanadate PrVO$_4$ under high pressure conditions, up until 24 GPa. We have found that PrVO$_4$ undergoes a zircon to monazite transition at around 6 GPa, confirming previous results found by Raman experiments. A second transition takes place above 14 GPa, to a BaWO$_4$-I--type structure. The zircon to monazite structural sequence is an irreversible first-order transition, accompanied by a volume collapse of about 9.6%. Monazite phase is thus a metastable polymorph of PrVO$_4$. The monazite-BaWO$_4$-II transition is found…

Work (thermodynamics)Condensed Matter - Materials Science010405 organic chemistryChemistryMaterials Science (cond-mat.mtrl-sci)FOS: Physical sciences010402 general chemistryCompression (physics)01 natural sciences0104 chemical sciencesCharacterization (materials science)Inorganic ChemistryCondensed Matter - Other Condensed MatterHigh pressurePhase (matter)Physical and Theoretical ChemistryComposite materialOther Condensed Matter (cond-mat.other)
researchProduct

Peak dispersion in gradient elution: An insight based on the plate model.

2020

Gradient elution in liquid chromatography reduces the analysis time, improves the efficiency and increases the peak capacity. The study of this chromatographic mode has been based mainly on kinetic dispersion models. The plate model has been applied to a lesser extent, despite being the basis for the concepts of plate height and chromatographic efficiency. In this work, a general equation describing peak dispersion in HPLC gradient elution is derived from the plate model. This equation is studied and validated for three types of gradients: (i) a reference gradient without ramp in which the retention factor varies with time identically throughout the column, (ii) a gradient of stationary pha…

Work (thermodynamics)Differential equation010402 general chemistryKinetic energy01 natural sciencesBiochemistryHigh-performance liquid chromatographyAnalytical ChemistryPressureChromatography High Pressure LiquidChromatographyChemistryElution010401 analytical chemistryOrganic ChemistryGeneral MedicineMechanicsCompression (physics)0104 chemical sciencesKineticsModels ChemicalLinear ModelsSolventsIndicators and ReagentsDispersion (chemistry)Constant (mathematics)Journal of chromatography. A
researchProduct

2017

The volume of ordinary materials decreases in response to a pressure increase exerted by a surrounding gas or liquid, i.e., the material volume compressibility is positive. Recently, poroelastic metamaterial architectures have been suggested theoretically that allow for an unusual negative effective static volume compressibility—which appears to be forbidden for reasons of energy conservation at first sight. The challenge in the three-dimensional (3D) fabrication of these blueprints lies in the necessary many hollow 3D crosses sealed by thin membranes, which we realize in this work by using 3D laser microlithography combined with a serendipitous mechanism. By using optical-microscopy cross-…

Work (thermodynamics)FabricationMaterials scienceCondensed matter physicsPressure controlPoromechanicsGeneral Physics and AstronomyMetamaterial02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesEnergy conservationVolume (thermodynamics)0103 physical sciencesCompressibility010306 general physics0210 nano-technologyPhysical Review X
researchProduct

Effect of plastic deformation on photoluminescence of ZnTe bulk monocrystals

1999

Abstract In this work ZnTe bulk single crystals have been deformed by axial compression with the aim of analyzing the luminescence properties related to intrinsic structural defects like dislocations. Plastic deformation greatly decreases the overall PL response, near-band-edge luminescence as well as deep level-related emissions. Results indicate a close relationship between the so-called Y1 and Y2 bands and the density of generated dislocations. Plastic deformation also produces an emission band at 603 nm whose intensity is proportional to the amount of introduced deformation.

Work (thermodynamics)Materials sciencePhotoluminescenceCondensed matter physicsMineralogyCondensed Matter PhysicsInorganic ChemistryCondensed Matter::Materials ScienceClose relationshipAxial compressionMaterials ChemistryDislocationDeformation (engineering)LuminescenceIntensity (heat transfer)Journal of Crystal Growth
researchProduct

An insight on the thermo-mechanical behaviour of a shale

2016

In recent years, several shale formations have been employed in geo-energy related engineering fields that foresee the presence of high thermal loads or significant temperature variations. Such thermal conditions are related to a need to reach great depths (several hundred of meters), as in the case of CO2 sequestration and Enhanced Geothermal System (EGS) technologies, or to the presence of thermal sources, as in the context of nuclear waste geological disposal. In addition, thermal changes can occur in shale formations through the injection of drilling and fracturing fluids at great depths, where a higher temperature with respect to the one of the injected fluid is encountered as a result…

Yield (engineering)Consolidation (soil)ModulusEnhanced geothermal systemshaleThermalCompressibilitymedicineSwellingmedicine.symptomComposite materialPetrologyOil shaleGeology
researchProduct