Search results for "Computer Science Applications"
showing 10 items of 3993 documents
How Electrical Heterogeneity Parameters of Ion-Exchange Membrane Surface Affect the Mass Transfer and Water Splitting Rate in Electrodialysis
2020
Electrodialysis (ED) has been demonstrated as an effective membrane method for desalination, concentration, and separation. Electroconvection (EC) is a phenomenon which can essentially increase the mass transfer rate and reduce the undesirable water splitting effect. Efforts by a number of researchers are ongoing to create conditions for developing EC, in particular, through the formation of electrical heterogeneity on the membrane surface. We attempt, for the first time, to optimize the parameters of surface electrical heterogeneity for ion-exchange membranes used in a laboratory ED cell. Thirteen different patterns on the surface of two Neosepta anion-exchange membranes, AMX and AMX-Sb, w…
Residual stresses and FCP prediction in FSW through a continuous FE model
2009
Abstract Residual stresses prediction is definitively a relevant and open issue in welding processes. In the last years, different numerical models are proposed by many researchers to predict the residual stress field in FSW butt joint. However, most of these works are based on properly tuned analytical models and neglect the effect of the mechanical action due to the presence of the tool pin. In the present paper, a continuous 3D FE model, which was previously developed by some of the authors, was used to simulate the FSW process of butt joints with a single block approach, and predict the residual stress field by considering both thermal and mechanical actions. Then, the residual stress e…
Temperature control during Spark Plasma Sintering and application to up-scaling and complex shaping
2013
International audience; The determination and the homogeneity of the sample temperature during consolidation of powders by Spark Plasma Sintering (SPS) are addressed. Densifications were carried out in three different facilities differing by their constructors and their size. A structural transformation activated in a TiAl alloy was used as a marker of the sample temperature and finite element modeling were performed to evaluate the temperature at each point of the set-up. A good agreement between experimental and simulated data is exhibited. Alloys with identical microstructures were sintered and the homogeneity of the microstructure was better in the largest machines or when the sample wa…
WEAR PERFORMANCE OF CERAMIC CUTTING-TOOL MATERIALS WHEN CUTTING STEEL
1991
Abstract Some test cycles have been carried out in continuous cutting conditions, employing cutting parameters (feed, depth of cut and cutting speed) chosen following experimental planes and suitable test fields. The wear tests have been carried out on AISI 1040 steel with cutting speeds from 5m/sec to 11m/sec. The silicon nitride, sintered carbide, cubic boron nitride and alumina reinforced with SiC whiskers inserts, have shown, at each assigned cutting parameter, poor wear resistance when cutting steel. Alumina and alumina in submicron grain, which has been toughened by ZrO2 phase transformation, and the oxide-based alumina, have been the better wear resistance. The mixed based alumina ha…
Composite layer-based analytical models for tool–chip interface temperatures in machining medium carbon steels with multi-layer coated cutting tools
2006
Abstract This investigation is devoted to the thermal problems in dry orthogonal turning of a C45 medium carbon steel with natural contact tools treated with multi-layer coatings with an intermediate Al 2 O 3 layer. New hybrid analytical models for estimating heat partition to the chip and the tool–chip interface temperatures were proposed. Furthermore, the physics-based modelling concept, which applies composite layer approach was developed to estimate the average and maximum steady-state tool–chip interface temperatures in orthogonal turning. The model predictions were compared to appropriate experimental process data using natural tool-work thermocouples and other simulated and measured …
Ab Initio Simulation of Attosecond Transient Absorption Spectroscopy in Two-Dimensional Materials
2018
We extend the first-principles analysis of attosecond transient absorption spectroscopy to two-dimensional materials. As an example of two-dimensional materials, we apply the analysis to monolayer hexagonal boron nitride (h-BN) and compute its transient optical properties under intense few-cycle infrared laser pulses. Nonadiabatic features are observed in the computed transient absorption spectra. To elucidate the microscopic origin of these features, we analyze the electronic structure of h-BN with density functional theory and investigate the dynamics of specific energy bands with a simple two-band model. Finally, we find that laser-induced intraband transitions play a significant role in…
Stability of Halloysite, Imogolite, and Boron Nitride Nanotubes in Solvent Media
2018
Inorganic nanotubes are attracting the interest of many scientists and researchers, due to their excellent application potential in different fields. Among them, halloysite and imogolite, two naturally-occurring aluminosilicate mineral clays, as well as boron nitride nanotubes have gained attention for their proper shapes and features. Above all, it is important to reach highly stable dispersion in water or organic media, in order to exploit the features of this kind of nanoparticles and to expand their applications. This review is focused on the structural and morphological features, performances, and ratios of inorganic nanotubes, considering the main strategies to prepare homogeneous col…
SUBWAVELENGTH OPTICAL DEVICES FOR NANOMETER SCALE APPLICATIONS
2002
Recent progress in near-field optics instrumentation led to a new class of subwavelength optical experiments in which it is intended to use either the optical tunnel effect (OTE) or the lower mode based transmission (LMBT) in order to control the optical transfer between several delocalized detection or injection centers. This paper presents a panel of new theoretical and experimental results computed or observed near various dielectric or metallic patterns, linear, curved, or dashed, integrated in coplanar geometry. In particular, we demonstrate, how an efficient control of light evanescent waves can allow structures of subwavelength cross sections to be addressed.
Residual stresses in friction stir welded parts of complex geometry
2011
Residual stresses play a key role on the mechanics underlying the fatigue crack growth propagation of welded joints. Indeed, compressive residual stresses may induce a beneficial enhancement of the fatigue life under loading condition whereas tensile residual stresses may act to increase the stress distribution at crack tip, resulting in a life-threatening condition of the welded structure. In-process distortion and final geometry of welded joints are also affected by residual stresses. In this paper, the longitudinal residual stress distributions in friction stir welding (FSW) joints were investigated for butt and skin–stringer geometries, including lap and T configurations. To measure res…
Advanced approach to the local structure reconstruction and theory validation on the example of the W L 3 -edge extended x-ray absorption fine struct…
2018
The authors gratefully acknowledge the assistance of the ELETTRA XAFS beamline staff members during the EXAFS experiment No 20150303. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.