Search results for "Computer Vision"
showing 10 items of 2353 documents
Reduction of the spherical aberration effect in high-numerical-aperture optical scanning instruments.
2006
In modern high-numerical-aperture (NA) optical scanning instruments, such as scanning microscopes, optical data storage systems, or laser trapping technology, the beam emerging from the high-NA objective focuses deeply through an interface between two media of different refractive index. Such a refractive index mismatch introduces an important amount of spherical aberration, which increases dynamically when scanning at increasing depths. This effect strongly degrades the instrument performance. Although in the past few years many different techniques have been reported to reduce the spherical aberration effect, no optimum solution has been found. Here we concentrate on a technique whose mai…
Performance Enhancement of Alkaline Water Electrolyzer Using Nanostructured Electrodes Synthetized by Template Electrosynthesis
2018
The increase of power generation by renewable sources is causing problems in the management of the electricity grid. In order to favor the transition from the current energy production towards renewable energy sources, it is necessary to plan strategy to develop suitable energy storage systems. Certainly, the electrochemical hydrogen production can be considered as one of the most promising storage technologies. In this work, an innovative alkaline electrolyzer is presented from its design based on the use of nanostructured electrodes up to its implementation suggested by the results of tests simulating real operation. The nanostructured electrodes were fabricated by template electrosynthes…
Electroplated bismuth absorbers for planar NTD-Ge sensor arrays applied to hard x-ray detection in astrophysics
2018
Single sensors or small arrays of manually assembled neutron transmutation doped germanium (NTD-Ge) based microcalorimeters have been widely used as high energy-resolution detectors from infrared to hard X-rays. Several planar technological processes were developed in the last years aimed at the fabrication of NTD-Ge arrays, specifically designed to produce soft X-ray detectors. One of these processes consists in the fabrication of the absorbers. In order to absorb efficiently hard X-ray photons, the absorber has to be properly designed and a suitable material has to be employed. Bismuth offers interesting properties in terms of absorbing capability, of low heat capacity (needed to obtain h…
Fabrication and Characterisation of Perovskite Thin Films for Photovoltaic Application
2018
This paper presents an alternative way to obtain perovskite thin films for photovoltaic application. This technique results more competitive, scalable, low-cost, reproducible and is different from other most common methods of fabrication.
Routing Design in Wireless Sensor Networks and a Solution for Healthcare Environments
2011
This work presents the software implementation of a tissue engineering image analysis tool through the study of several biomaterials by means of different microscopy techniques (optical, scanning electron, and atomic force microscopy). With this tool, different quantitative information has been extracted from the microscopy image analysis of these biomaterials, as the number of objects, their mean size and the area they cover. Morphological characteristics, as the roundness or the porosity have been also obtained. All these quantitative information has permitted an statistical analysis over the obtained results.
Wood fiber orientation assessment based on punctual laser beam excitation: A preliminary study
2016
International audience; The EU imposes standards for the use of wood in structural applications. Local singularities such as knots affect the wood mechanical properties. They can be revealed by looking at the wood fiber orientation. For this reason, many methods were proposed to estimate the orientation of wood fiber using optical means, X-rays, or scattering measurement techniques. In this paper, an approach to assess the wood fiber orientation based on thermal ellipsometry is developed. The wood part is punctually heated with a Nd-YAG Laser and the thermal response is acquired by an infrared camera. The thermal response is elliptical due to the propagation of the heat through and along th…
Accurate color predictability based on a spectral retardance model of a twisted-nematic liquid-crystal display
2011
Abstract In this work we present the application of a simple physical model to accurately predict the broadband spectral transmittance and colorimetric properties of a twisted-nematic liquid crystal display (TNLCD). We spectroscopically calibrate the retardance parameters to evaluate the spectrum of the light transmitted by a TNLCD sandwiched between two linear polarizers. When the TNLCD is illuminated with a broadband light source, the full spectrum can be predicted as a function of the addressed gray level for any arbitrary orientation of the polarizers. Thus, the color of the transmitted light can be also be estimated with very good accuracy. As an example, a polarizers' configuration is…
Optical studies of laser-induced gray-tracking in KTP
1999
We have studied gray-tracking induced by a pulsed and polarized 532-nm laser beam in flux grown KTiOPO/sub 4/ (KTP) crystals. Transmission spectra measured under polarized light give different results: gray-tracking leads to an increase in the initial anisotropy of the linear optical properties of KTP, and the polar axis is the most sensitive to this process. The dynamics of relaxation of gray-tracking is anisotropic and depends on the wavelength under analysis. We show a possible induced modification of the crystal surface and also the existence of an intensity above which gray-tracking reaches the saturation point. We then measure the temperature above which gray-tracking no longer exists.
Flexible Magnetoresistive Sensors for Guiding Cardiac Catheters
2018
Cardiac catheterization is a procedure, in which a long thin tube that is called a “catheter” is inserted into the heart for diagnosis or treatment. Due to the excessive use of x-ray doses and contrast agents for orientation detection during the surgery, there is a need to find a better alternative. This paper presents magnetic tunnel junction sensors on flexible Si attached to the catheter tip for orientation detection during minimally invasive surgeries. Due to the small size of catheters, extreme minimization in terms of size, weight, thickness and power consumption is needed for any device implemented on it. The fabricated flexible magnetic tunnel junctions fulfill those requirements wi…
Geometric characterization and simulation of planar layered elastomeric fibrous biomaterials
2015
An important class of biomaterials is composed of layered networks of elastomeric fibers. While there is a growing interest in modeling and simulation of the mechanical response of these biomaterials, a theoretical foundation for such simulations has yet to be firmly established. The present work addresses this issue in two ways. First, using methods of geometric probability we develop theoretical estimates for the linear and areal fiber intersection densities for two-dimensional fibrous networks. These are expressed in terms of the fiber density and orientation distribution function, both of which are relatively easy to measure properties. Secondly, we develop a random walk algorithm for g…