Search results for "ComputerSystemsOrganization_COMPUTER-COMMUNICATIONNETWORKS"
showing 10 items of 449 documents
Hybrid Observer for Indoor Localization with Random Time-of-Arrival Measurments
2018
In this work an indoor position estimation algorithm will be proposed. The position will be measured by means of a sensor network composed by fixed beacons placed on the indoor environment and a mobile beacon mounted on the object to be tracked. The mobile beacon communicates with all the fixed beacons by means of ultra wide-band signals, and the distance between them is computed by means of time of flight techniques. Moreover, inertial measurements will be used when the position measurements are not available. Two main problems will be considered in the proposed architecture: the fact that the beacons work with a lower update rate than the IMU, and that the mobile beacon can comunicate wit…
Scheduling solution for the IEEE 802.16 base station
2008
The IEEE 802.16 standard defines a wireless broadband access network technology called WiMAX. It introduces several advantages, one of which is the support for QoS at the MAC level. To ensure meeting the QoS requirements, the 802.16 base station must run some algorithm to allocate slots between connections. This algorithm is not defined in the 802.16 specification but rather is open for alternative implementations. We propose a simple, yet efficient, solution that is capable of allocating slots based on the QoS requirements, bandwidth request sizes, and the 802.16 network parameters. To test the proposed solution, we have implemented the 802.16 MAC and PHY layers in the NS-2 simulator. Seve…
Handover performance in the IEEE 802.16 mobile networks
2012
The IEEE 802.16 standard provides a full mobility support for stations moving across cell borders. In addition, the WiMAX Forum Network Working Group defines a set of procedures to support handovers in the mobile access network. One of the main characteristics of mobility support is fully controlled and optimized handover (HO), in which a mobile station (MS) migrates from the air interface of one base station (BS) to another one. It is vital to keep the BS transition phase as short as possible to decrease delays and data loss, which is especially crucial for real-time applications, such as VoIP. In this paper we analyze ASN-anchored mobility performance and provide advisable handover relate…
Optimal MAC PDU Size in IEEE 802.16
2008
In the IEEE 802.16 the number of errors and the MAC PDU size have an impact on the performance of the network. We present a way to estimate the optimal PDU size and we run a number of simulation scenarios to study these parameters and how they impact on the performance of application protocols. The simulation results reveal that the channel bit error rate has a major impact on the optimal PDU size in the IEEE 802.16 networks. Also, the ARQ block rearrangement influences the performance.
Performance Evaluation of the IEEE 802.16 ARQ Mechanism
2007
The IEEE 802.16 technology defines the ARQ mechanism that enables a connection to resend data at the MAC level if an error is detected. In this paper, we analyze the key features and parameters of the ARQ mechanism. In particular, we consider a choice for the ARQ feedback type, a scheduling of the ARQ feedbacks and retransmissions, the ARQ block rearrangement, ARQ transmission window and ARQ block size. We run a number of simulation scenarios to study these parameters and how they impact a performance of application protocols. The simulation results reveal that the ARQ mechanism plays an important role in transmitting data over wireless channels in the IEEE 802.16 networks.
Performance comparison of HARQ and ARQ mechanisms in IEEE 802.16 networks
2008
The IEEE 802.16 technology defines several link level mechanisms to retransmit erroneous data. In this paper we compare the performance of the ARQ and HARQ mechanisms in the IEEE 802.16 networks. Our simulations results show that in general HARQ provides a better performance. However, ARQ can compete successfully with it due to a smaller signaling overhead. Furthermore, since ARQ does not require a dedicated uplink signaling channel for the acknowledgments messages, it results in better resources utilization in the uplink direction.
Analysis of the IEEE 802.11e EDCA Under Statistical Traffic
2006
Many models have been proposed to analyze the performance of the IEEE 802.11 distributed coordination function (DCF) and the IEEE 802.11e enhanced distributed coordination function (EDCA) under saturation condition. To analyze DCF under statistical traffic, Foh and Zukerman introduce a model that uses Markovian Framework to compute the throughput and delay performance. In this paper, we analyze the protocol service time of EDCA mechanism and introduce a model to analyze EDCA under statistical traffic using Markovian Framework. Using this model, we analyze the throughput and delay performance of EDCA mechanism under statistical traffic.
Link Adaptation Thresholds for the IEEE 802.16 Base Station
2008
The IEEE 802.16 technology defines a number of modulation and coding schemes that the base station can use to achieve the best tradeoff between the spectrum efficiency and the resulting application level throughput. However, the 802.16 specification does not define any particular link level adaptation algorithm, neither does it specify the SNR thresholds to switch between modulation and coding schemes. In this paper we consider a link adaptation model and conduct a number of simulation runs to find transition thresholds for ARQ and HARQ retransmission mechanisms. All the simulations are done with the 802.16 extension for the NS-2 simulator.
A performance analysis of block ACK scheme for IEEE 802.11e networks
2010
The demand for the IEEE 802.11 wireless local-area networks (WLANs) has been drastically increasing along with many emerging applications and services over WLAN. However, the IEEE 802.11 medium access control (MAC) is known to be limited in terms of its throughput performance due to the high MAC overhead, such as interframe spaces (IFS) or per-frame based acknowledgement (ACK) frame transmissions. The IEEE 802.11e MAC introduces the block ACK scheme for improving the system efficiency of the WLAN. Using the block ACK scheme can reduce the ACK transmission overhead by integrating multiple ACKs for a number of data frames into a bitmap that is contained in a block ACK frame, thus increasing t…
Increasing the VoIP Capacity through MAP Overhead Reduction in the IEEE 802.16 OFDMa Systems
2010
One of the main issues with supporting VoIP service over 802.16 networks is the signalling overhead caused by the downlink MAP messages due to frequent transmissions and small packets. To decrease the MAP overhead, the 802.16 standard proposes some mechanisms, such as the compressed MAP and sub-MAPs. In this paper, we show by means of extensive dynamic simulations that sub-MAPs can reduce dramatically the signalling overhead associated with VoIP traffic and significantly improve overall VoIP capacity. At the same time, since sub-MAPs are more sensitive to packet drops, they tend to increase the number of HARQ retransmissions in downlink and transmission delays in the uplink direction.