Search results for "Control."
showing 10 items of 13063 documents
Flow Control of Fluid in Pipelines Using PID Controller
2019
In this paper, a PID controller is utilized in order to control the flow rate of the heavy oil in pipelines by controlling the vibration in a motor pump. A torsional actuator is placed on the motor pump in order to control the vibration on a motor and consequently controlling the flow rates in pipelines. The necessary conditions for the asymptotic stability of the proposed controller are validated by implementing the Lyapunov stability theorem. The theoretical concepts are validated utilizing numerical simulations and analysis, which proves the effectiveness of the PID controller in the control of flow rates in pipelines.
A Humanoid Social Robot Based Approach for Indoor Environment Quality Monitoring and Well-Being Improvement
2020
The indoor environmental quality (IEQ) monitoring inside buildings where people spend most of their time is essential for ensuring their well-being. Traditional approaches based on Building Automation and Control Systems consider buildings equipped with many different sensors. Unfortunately, the sensors are not always placed for taking the measurements at the right positions. Besides, users could feel a negative perception due to continuous supervision. The present work proposes an approach based on a social humanoid robot that monitors indoor environmental quality. It friendly interacts with occupants providing appropriate suggestions. Particularly, the social robot has been endowed with c…
Power losses in power-split CVTs: A fast black-box approximate method
2018
Abstract This paper addresses the mechanical losses of planetary transmissions, with particular attention to power-split CVTs in their hybrid electric versions. It provides unified layout-independent analytical relationships, which can be used for both analysis, design and control purposes, and a simplified approach; the latter overcomes the necessity to segment the operating range of the power-split CVT in order to keep its loss model physically consistent. An example of application to a real hybrid electric PS-CVT is performed to show the simplicity, accuracy and generality of the proposed method.
A Geometrical Approach for Vision Based Attitude and Altitude Estimation for UAVs in Dark Environments
2012
International audience; This paper presents a single camera and laser system dedicated to the realtime estimation of attitude and altitude for unmanned aerial vehicles (UAV) under low illumination conditions to dark environments. The fisheye camera allows to cover a large field of view (FOV). The approach, close to structured light systems, uses the geometrical information obtained by the projection of a laser circle onto the ground plane and perceived by the camera. We propose some experiments based on simulated data and real sequences. The results show good agreement with the ground truth values from the commercial sensors in terms of its accuracy and correctness. The results also prove i…
Using an Adaptive High-Gain Extended Kalman Filter With a Car Efficiency Model
2010
The authors apply the Adaptive High-Gain Extended Kalman Filter (AEKF) to the problem of estimating engine efficiency with data gathered from normal driving. The AEKF is an extension of the traditional Kalman Filter that allows the filter to be reactive to perturbations without sacrificing noise filtering. An observability normal form of the engine efficiency model is developed for the AEKF. The continuous-discrete AEKF is presented along with strategies for dealing with asynchronous data. Empiric test results are presented and contrasted with EKF-derived results.Copyright © 2010 by ASME
Method for 3D fibre reconstruction on a microrobotic platform
2015
Automated handling of a natural fibrous object requires a method for acquiring the three-dimensional geometry of the object, because its dimensions cannot be known beforehand. This paper presents a method for calculating the three-dimensional reconstruction of a paper fibre on a microrobotic platform that contains two microscope cameras. The method is based on detecting curvature changes in the fibre centreline, and using them as the corresponding points between the different views of the images. We test the developed method with four fibre samples and compare the results with the references measured with an X-ray microtomography device. We rotate the samples through 16 different orientatio…
Direct Torque Control of a Small Wind Turbine with a Sliding-Mode Speed Controller
2016
In this paper. the method of direct torque control in the presence of a sliding-mode speed controller is proposed for a small wind turbine being used in water heating applications. This concept and control system design can be expanded to grid connected or off-grid applications. Direct torque control of electrical machines has shown several advantages including very fast dynamics torque control over field-oriented control. Moreover. the torque and flux controllers in the direct torque control algorithms are based on hvsteretic controllers which are nonlinear. In the presence of a sliding-mode speed control. a nonlinear control system can be constructed which is matched for AC/DC conversion …
Virtual sensing of load forces in hydraulic actuators using second- and higher-order sliding modes
2019
Abstract External load forces are challenging for sensing or estimating in the hydraulic actuators. Once it is due to inconvenient instrumentation of the force sensors, especially on an open-end mechanical interface. The other way, the complex nonlinear system behavior aggravates reconstructing the system states in a robust and real-time suitable manner. This paper proposes a sensorless estimation of external load forces in standard hydraulic actuators by using a well-established equivalent output injection of the second-order sliding mode and also higher-order sliding mode differentiator. Only the basic inertial and frictional parameters are assumed to be known from an initial identificati…
A port-Hamiltonian Fluid-Structure Interaction Model for the Vocal folds ⁎ ⁎This work was supported by CONICYT-PFCHA/2017-21170472, and AC3E CONICYT-…
2018
Abstract Fluid-structure interaction models are of special interest for studying the energy transfer between the moving fluid and the mechanical structure in contact. The vocal folds are an example of a fluid-structure system, where the mechanical structure is usually modeled as a mass-spring-damper system. In particular, the estimation of the collision forces of the vocal folds is of high interest in the diagnosis of phonotraumatic voice pathologies. In this context, the port-Hamiltonian modeling framework focuses on the energy flux in the model and the interacting forces. In this paper, we develop a port-Hamiltonian fluid-structure interaction model based on the interconnection methodolog…
K-nearest neighbor driving active contours to delineate biological tumor volumes
2019
Abstract An algorithm for tumor delineation in positron emission tomography (PET) is presented. Segmentation is achieved by a local active contour algorithm, integrated and optimized with the k-nearest neighbor (KNN) classification method, which takes advantage of the stratified k-fold cross-validation strategy. The proposed approach is evaluated considering the delineation of cancers located in different body districts (i.e. brain, head and neck, and lung), and considering different PET radioactive tracers. Data are pre-processed in order to be expressed in terms of standardized uptake value, the most widely used PET quantification index. The algorithm uses an initial, operator selected re…