Search results for "Converter"
showing 10 items of 275 documents
A bidirectional converter for the integration of LiFePO4 batteries with RES-based generators. Part II: Laboratory and field tests
2014
This paper presents a device for controlling and connecting combined Renewable Energy Sources (RES)-based generators and electric storage systems to the supply utility grid. The device is a bidirectional converter that can be controlled in order to facilitate the interface between the low voltage grid and small generators combined with Li-ion batteries, contemporary addressing the requirements of the reference technical standards for users connection and providing different ancillary services. The paper describes the laboratory and field test activities carried out by the DEIM of the University of Palermo and ENEA during 2013.
A DC-DC power converter for PV module characterization
2014
In this paper, a standard-compliant electronic load setup for PV module curve detection which features high accuracy, low cost and components count is proposed. The proposed device is based on a DC-DC power converter in open-loop configuration. The proposed system is designed according to regulation constraints in order to achieve high performances in curve detection. Design criteria are discussed. The model is implemented in PSIM environment. Simulation based on data input of a commercial PV Conergy E215P module are carried out under several environmental conditions to show the accuracy of the proposed electronic load. Simulation results are reported.
Identification and robust control of DC/DC converter Hammerstein model
2008
Abstract—This paper deals with model-based robust control of dc/dc power electronic converters. The converter is described by means of a Hammerstein model consisting of the nonlinear static characteristics of the converter and a linear time-invariant (LTI) uncertainmodel whose parameters depend on the actual duty-cycle operating range. This suggests that the controller be designed using robust control techniques. In view of applying robust control, identification of the earlier LTI models is performed by means of simulation experiments, carried out on a converter switching model implemented onMATLAB/SIMULINK environment. Internal model control (IMC) structure is employed for the controller …
Implementation and experimental validation of a real-time PWM algorithm based on B-Spline carriers for three phase voltage source inverters
2009
This paper presents the implementation and experimental results of an algebraic real-time sinusoidal pulse width modulation algorithm (SPWM) based on B-Spline carriers. B-spline functions are used as carrier signals with the aim to to reduce harmonic content of the three phase inverter output voltage. The presented algorithm eliminates the problem of B-spline recursive evaluation with convolution integrals or convolution sums in digital counterpart. The pulse pattern synthesis is made with the help pre-calculated duty cycle expressions. In this way there is no real need to synthesize the carrier signal so the hardware and the whole inverter control system becomes cheaper, more reliable and …
A Geometrical Simple Approach for Power Silicon Devices Fault Detection and Fault-Tolerant Operation of a Voltage Source Inverter
2012
Fault-tolerant converters have been widely investigated for years and nowadays an extensive technical literature on this field exists. This paper presents a novel fault detection algorithm based on a simple geometrical approach. In the algorithm analysis both the case of faults in single device and the lose of an entire inverter leg have been considered. False positive detections are avoided by considering a proper number of current samples. The proposed fault detection algorithm is characterized by simplicity, low computational and implementation effort with a consequent enough fast execution, easy control integration with the possibility to use it both in hardware in the loop systems and …
A suitable control technique for fault-tolerant converters in Distributed Generation
2011
The penetration of Distributed Generation (DG) in power systems is deeply changing the existing distribution networks which is becoming a very sophisticated and complex systems incorporating both active (generators) and passive systems (distribution systems, converters and loads). The necessary simplification can be obtained dealing with small networks, namely Micro-Grids, reproducing, in a smaller scale, the structure and the problems of large networks including production, transmission and distribution of the electrical energy. In order to achieve an adequate level of reliability, fault-tolerant operations of micro-grids become very important. This result can be achieved only using power …
A circuit model of a 5kW fuel cell
2013
In the last few years, industrial research has been focused on renewable energy sources. Owing to combined heat-power generation option, fuel cells have attracted much interest for a wide variety of research areas. Household appliances are still the most promising applications. Fuel cell modeling is still a critical topic to focus on, affecting each stage of power system design. This paper describes an empirical method to model a proton exchange membrane fuel cell. The modeling approach is applied to a 5kW Nuvera PowerFlow fuel cell. A circuit model is proposed for further applications. PSPICE implementation is described and the parameters tuning procedure is discussed. Simulation and exper…
Hammerstein Model-Based Robust Control of DC/DC Converters
2007
This paper deals with model-based robust control of DC/DC power electronic converters. The converter is modelled by means of its static characteristic and a few continuous-time linear and time-invariant (LTI) models corresponding to contiguous ranges of duty-cycle. The model appears as a Hammerstein model in which the values of the parameters of the LTI part depend on the actual duty-cycle operating range. This suggests to describe the converter as an uncertain system to be controlled using robust control techniques. Frequency domain approach is used for describing the nominal model and the uncertainty. In view of applying robust control, identification of the LTI models is performed by mea…
A New Device for the Control and the Connection to the Grid of Combined RES-based Generators and Electric Storage Systems
2013
In this paper a new device for the control and the connection to the supply utility grid of combined RES-based generators and electric storage systems is presented. The device is a bidirectional converter that can be controlled so as to facilitate the interface between the low voltage grid and photovoltaic or wind generators combined with batteries, contemporary addressing the requirements of the reference technical standards for users connection and providing different ancillary services. In the paper the functioning of the device and its circuit diagram are described, the single parts are shown and the potentiality of its control system are commented. © 2013 IEEE.
A General Mathematical Model for non-Redundant Fault-Tolerant Inverters
2011
Industrial systems able to release trusted services is an integrated concept that resumes the attributes of availability, reliability, safety, integrity, and maintainability. In power electronics this can be aimed via the introduction of fault tolerant architectures. While In the past technical literature the mathematical modeling problem for non-redundant converters was fronted studying separately the cases of fault leg by leg, in this paper a general model able to include the three possible cases of leg faults with a unique set of equation is introduced and discussed. The same model allows to evaluate the DC Link transient and steady state evolution and also allows to develop with much ea…