Search results for "Crete"
showing 10 items of 2495 documents
Reconstruction Problem of Reinforced Concrete Beams under Harmonic Excitations
2007
A damage detection method based on harmonic structural vibrations has been applied to reconstruct realistic damage patterns of reinforced concrete beams. It was shown that the application of a hybrid method (genetic algorithm and Levenberg-Marquardt minimization technique) makes it possible to effectively reconstruct the flexural stiffness drops as small as 10-20% with the maximum error of 4%. The error increases to about 7 to 9% with the presence of 1% measurement noise.
Compressive behavior of short fibrous reinforced concrete members with square cross-section
2011
In the present paper a mechanical model to predict the compressive response of high strength short concrete columns with square cross-section confined by transverse steel is presented. The model allows one to estimate the equivalent confinement pressures exercised by transverse steel during the loading process taking into account of the interaction of the stirrups with the inner core both in the plane of the stirrups and in the space between two successive stirrups. The lateral pressure distributions at hoop levels are obtained by using a simple model of elastic beam on elastic medium simulating the interaction between stirrups and concrete core, including yielding of steel stirrups and dam…
Strength and ductility of R.C. columns strengthened with steel angles and battens
2012
Abstract In this paper the behaviour of R.C. members externally strengthened with steel angles and battens subjected to axial force and bending moment is analysed. A fibre model was utilised to predict the moment–curvature diagrams of the strengthened members on the basis of stress–strain curves of the constituent materials (confined concrete, steel bars and angles) recently derived by the author. The stress–strain curves utilised for compressed concrete were able to take into account the confinement effects induced by longitudinal (bars and steel angles) and transverse (stirrups and battens) steel reinforcements. Constitutive laws in compression for confined concrete and steel bars and ang…
Flexural Response of RC Beams Failing in Shear
2020
In this paper, an analytical model to determine the flexural response of simply supported RC beams under four-point bending tests failing in flexure and shear is presented. The model is able to provide load-deflection curves, including also the shear contributions, which are determined assuming a kinematic rigid plastic model able to consider different strength contributions such as the concrete, the dowel action, and transverse reinforcement with progressive yielding. For each contribution, a physical explanation is provided to link the strength evaluation with a specific kinematic evolution for the determination of the overall response of RC beams under combined shear and flexural loads. …
Behaviour in compression of lightweight fiber reinforced concrete confined with transverse steel reinforcement
2004
Abstract The compressive behavior of lightweight fiber reinforced concrete confined with transverse reinforcement consisting of steel stirrups or spirals was analyzed. Pumice stone and expanded clay aggregates were utilized to decrease the weight of the composite; hooked steel fibers were also added. The investigation was carried out by testing cylindrical and prismatic specimens of different sizes in compression using an open-loop displacement control machine, recording the full load–deformation curves. The influence of the dimensions and shape on the bearing capacity and on the ductility of the specimens confined with transverse steel reinforcements was analyzed. The results show the poss…
Flexural response of FRC corbels
2009
Abstract A strut-and-tie macro-model is proposed to determine the flexural response of fiber reinforced concrete (FRC) corbels, reinforced with longitudinal bars and subjected to vertical load. The effects of the corbel geometry, the percentage of steel fibers, and grades of concrete and steel bars are also included. The model, which is specific for FRC corbels with hooked steel fibers, allows the determination of load levels, and corresponding displacements, associated with the first cracking, yielding of the main steel bars and crushing of the concrete strut. The sequential occurrence of these phenomena is established, depending on the amounts of steel fibers and reinforcing steel. The si…
Steel fiber-reinforced concrete corbels:experimental behavior and shear strength prediction
2007
Corbels are structural members often used in reinforced concrete structures to transfer vertical and horizontal forces to principal members. This paper presents experimental research regarding the flexural behavior of corbels in plain and fibrous concrete and in the presence of steel bars. The study considers the influence of the type of concrete grade (normal- and high-strength concretes), of the fiber percentage and of the arrangement and percentage of the steel bars on the flexural behavior of the corbels. The results in terms of load-deflection curves and crack patterns show the effectiveness in using fibrous reinforced concrete corbels as well as in the presence of stirrups ensuring ad…
Fibrous reinforced concrete beams in flexure: Experimental investigation, analytical modelling and design considerations
2008
Abstract The flexural behavior of plain and fibrous reinforced concrete (FRC) beams under monotonic and cyclic actions was analysed. Twelve beams were reinforced with top and bottom longitudinal deformed steel bars and transverse steel stirrups. Concrete, having 30 MPa cylindrical strength, was reinforced with hooked steel fibres at a volume percentage of 1%. Beams, 600 mm in length and with a square side cross-section of 150 mm, were tested in flexure using a three point bending test, adopting three different cover thicknesses of 5, 15 and 25 mm, respectively. The results obtained show that the addition of fibers increases the bearing capacity of the beams and ensures more ductile behaviou…
Flexural behaviour of concrete corbels containing steel fibers or wrapped with FRP sheets
2005
In the present paper an analytical and experimental investigation referring to the flexural behaviour of reinforced concrete corbels subjected to vertical forces is presented. For fixed shape and dimensions of the corbels the experimental investigation analyses the effects of the following: longitudinal and transverse steel reinforcements; fiber reinforced concrete (FRC) with hooked steel fibers; external wrapping retrofitting technique with a thin layer of carbon fiber sheet (CFRP). The analytical model based on equivalent truss structures, allows one to determine the bearing capacity of corbels, distinguishing the different ultimate states reached. The analytical results are then compared…
Modelling of the fracture toughness anisotropy in fiber reinforced concrete
2015
Steel fiber reinforced concrete is potentially very promising material with unique properties, which currently is widely used in some applications, such as floors and concrete pavements. However, lack of robust and reliable models of fiber reinforced concrete fracture limits its application as structural material. In this work a numerical model is proposed for predicting the crack growth in fiber reinforced concrete. The mixing of the steel fibers with the concrete usually creates nonuniform fibers distribution with more fibers oriented in horizontal direction, than in vertical. Simple numerical models of fiber reinforced concrete require a priori knowledge of the crack growth direction in …