Search results for "Crystallinity"
showing 10 items of 248 documents
Effect of doping and crystallite size on the electrochemical performance of Li4Ti5O12
2016
Abstract Defect spinel phase lithium titanate (Li 4 Ti 5 O 12 ) has been suggested as a promising negative electrode material for next generation lithium ion batteries. Flame spray pyrolysis has been shown to be a viable fast, one-step process for synthesis of nanoparticulate Li 4 Ti 5 O 12 . However, due to the rapid quenching that is integral to the process the crystallite size remain very small and non-uniform. To overcome this shortcoming a vertical flow tube furnace was used to increase the high-temperature residence time. This resulted in an increase in the crystallite size and crystallinity of the product. As a result of this increase the electrochemical performance of the Li 4 Ti 5 …
Nucleation and growth of ZnO on PMMA by low-temperature atomic layer deposition
2015
ZnO films were grown by atomic layer deposition at 35 °C on poly(methyl methacrylate) substrates using diethylzinc and water precursors. The film growth, morphology, and crystallinity were studied using Rutherford backscattering spectrometry, time-of-flight elastic recoil detection analysis, atomic force microscopy, scanning electron microscopy, and x-ray diffraction. The uniform film growth was reached after several hundreds of deposition cycles, preceded by the precursor penetration into the porous bulk and island-type growth. After the full surface coverage, the ZnO films were stoichiometric, and consisted of large grains (diameter 30 nm) with a film surface roughness up to 6 nm (RMS). T…
Controlled Release of Metformin Hydrochloride from Core-Shell Nanofibers with Fish Sarcoplasmic Protein
2019
Ficai, Anton/0000-0002-1777-0525; Karademir, Betul/0000-0003-1762-0284 WOS:000503463400074 PubMed ID: 31658758 Background and Objectives: A coaxial electrospinning technique was used to produce core/shell nanofibers of a polylactic acid (PLA) as a shell and a polyvinyl alcohol (PVA) containing metformin hydrochloride (MH) as a core. Materials and Methods: Fish sarcoplasmic protein (FSP) was extracted from fresh bonito and incorporated into nanofiber at various concentrations to investigate the influence on properties of the coaxial nanofibers. The morphology, chemical structure and thermal properties of the nanofibers were studied. Results: The results show that uniform and bead-free struct…
Influence of morphology in the magnetic properties of layered double hydroxides
2018
We report the controlled synthesis of magnetic CoAl and NiFe layered double hydroxides (LDHs) endowed with well-defined morphology (hexagonal and flower-like shapes) by means of modified homogeneous precipitation. These layered magnets display high crystallinity and micrometric size, thus offering a perfect scenario for the elucidation of the role exerted by distortion of the layers in their magnetic behaviour. The magnetic properties have been investigated by means of DC and AC magnetic susceptibility measurements and isothermal magnetization, demonstrating that the distortion of the nanosheets induces a magnetically more disordered behaviour, with marked spin-glass nature, independently o…
Phenomenological approach to compare the crystallization kinetics of isotactic polypropylene and polyamide-6 under pressure
2001
Reliable experimental data for semicrystalline polymers crystallized under pressure are supplied on the basis of a model experiment in which drastic solidification conditions are applied. The influence of the pressure and cooling rate on some properties, such as the density and microhardness, and on the product morphology, as investigated with wide-angle X-ray scattering (WAXS), is stressed. Results for isotactic polypropylene (iPP) samples display a lower density and a lower microhardness with increasing pressure over a wide range of cooling rates (from 0.01 to 20 °C/s). Polyamide-6 (PA6) samples exhibit the opposite behavior, with the density and microhardness increasing at higher pressur…
Physical and biological properties of electrospun poly( d , l ‐lactide)/nanoclay and poly( d , l ‐lactide)/nanosilica nanofibrous scaffold for bone t…
2021
Electrospun scaffolds exhibiting high physical performances with the ability to support cell attachment and proliferation are attracting more and more scientific interest for tissue engineering applications. The inclusion of inorganic nanoparticles such as nanosilica and nanoclay into electrospun biopolymeric matrices can meet these challenging requirements. The silica and clay incorporation into polymeric nanofibers has been reported to enhance and improve the mechanical properties as well as the osteogenic properties of the scaffolds. In this work, for the first time, the physical and biological properties of polylactic acid (PLA) electrospun mats filled with different concentrations of n…
Injection molding of syndiotactic polystyrene/clay nanocomposites
2006
This study aims at exploring the effect of a commercial organoclay montmorillonite (MMT) on the final properties of syndiotactic polystyrene (sPS) injection-molded samples. To this goal, injection-molded specimens made from neat sPS and commercial MMT modified with various organic compounds were prepared in different molding conditions. Dispersion of clay was attained via melt blending, directly in the injection chamber of the injection-molding machine. The obtained specimens were analyzed by IR spectroscopy, X-ray diffraction, thermogravimetry, and differential thermal analysis, with the aim of elucidating the effect of clay on the microstructures of the samples. Results clearly show that,…
Broadband, site selective and time resolved photoluminescence spectroscopic studies of finely size-modulated Y2O3:Eu3+ phosphors synthesized by a com…
2014
Undoped and Eu3+-doped cubic yttria (Y2O3) nanophosphors of good crystallinity, with selective particle sizes ranging between 6 and 37 nm and showing narrow size distributions, have been synthesized by a complex-based precursor solution method. The systematic size tuning has been evidenced by transmission electron microscopy, X-ray diffraction, and Raman scattering measurements. Furthermore, size-modulated properties of Eu3+ ions have been correlated with the local structure of Eu3+ ion in different sized Y2O3:Eu3+ nanophosphors by means of steady-state and time-resolved site-selective laser spectroscopies. Time-resolved site-selective excitation measurements performed in the 7F0 ¿ 5D0 peak…
Influence of annealing conditions on the photoelectrocatalytic performance of WO3 nanostructures
2020
[EN] Nanostructured WO3 photoanodes have been synthesized by electrochemical anodization under controlled hydrodynamic conditions in acidic media in the presence of 0.05 M H2O2. Subsequently, samples have been subjected to a thermal treatment (annealing) at different temperatures (400 degrees C, 500 degrees C and 600 degrees C) and under different gaseous atmospheres (air, N-2, Ar). The influence of these annealing conditions on the morphology, crystallinity, photoelectrochemical behavior and dopant chemistry of the different photoanodes has been investigated through Electronic Microscopy, Raman Spectroscopy, Photoelectrochemical Impedance Spectroscopy and Mott-Schottky analysis. In general…
Preparation and recrystallization behavior of spray-dried co-amorphous naproxen–indomethacin
2016
To improve the dissolution properties and the physical stability of amorphous active pharmaceutical ingredients, small molecule stabilizing agents may be added to prepare co-amorphous systems. The objective of the study was to investigate if spray-drying allows the preparation of co-amorphous drug-drug systems such as naproxen-indomethacin and to examine the influence of the process conditions on the resulting initial sample crystallinity and the recrystallization behavior of the drug(s). For this purpose, the process parameters inlet temperature and pump feed rate were varied according to a 2(2) factorial design and the obtained samples were analyzed with X-ray powder diffractometry and Fo…