Search results for "Crystallite"
showing 10 items of 347 documents
Structural characterization of Nigerian coals by X-ray diffraction, Raman and FTIR spectroscopy
2010
Abstract The structural parameters of six Nigerian coals were determined by X-ray diffraction, Raman and FTIR spectroscopy. This study reveals that the coals contain crystalline carbon of turbostratic structure with some amount of highly disordered amorphous carbon. The average lateral sizes ( L a ), stacking heights ( L c ) and interlayer spacing ( d 002 ) of the crystallite structures calculated from the X-ray intensities range from 16.47 to 25.70, 8.12 to 13.25 and 3.48 to 3.58 A, respectively. The L a values derived from the Raman spectra analyses using the classical linear relationship between 1/ L a and the D/G band ratio are higher (27.53–34.67 A) than values obtained from X-ray diff…
An investigation of the spot profiles in transmission electron diffraction from Langmuir-Blodgett films of aliphatic chain compounds
1990
The profiles of the transmission diffraction spots from a Langmuir-Blodgett film of aliphatic chain compound are derived from three plausible models of molecular organisation : a polycrystalline phase with long-range orientational order; a paracrystal possessing a density of point defects which do not interrupt the lattice rows ; and a Nelson and Halperin hexatic smectic phase in the «Debye-Huckel» limit of weakly-interacting dislocations. The three resulting predictions are distinctly different. Experimental results are presented for the room-temperature diffraction patterns from Langmuir-Blodgett films of a lipid, DMPE, and the cadmium soap of a fatty acid, 22-tricosenoic. Only the Nelson…
Crystalline microstructure of sepiolite influenced by grinding
2005
The crystalline microstructure of ground sepiolite has been investigated. A reference sample of sepiolite and products of its comminution by dry grinding were studied through X-ray diffraction pattern analysis, specific surface measurements by nitrogen adsorption and complementary analysis of field emission scanning electron microscope images. A statistical model of polycrystals was applied to describe and determine the crystalline microstructure of the studied specimens. The model parameters characterizing the microstructure were prevalent crystallite shape, volume-weighted crystallite size distribution and second-order crystalline lattice strain distribution, and they were determined for …
Microstructural analysis (Voigt function method) of mullite in whiteware triaxial porcelains
2020
Triaxial porcelains were produced of two whiteware blends containing kaolin B (of “high-crystallinity” kaolinite) or halloysitic kaolin M (also with “low-crystallinity” kaolinite) in two different industrial firing cycles (fast or slow) with final temperatures 1270 °C, 1300 °C, 1320 °C and 1340 °C. The crystalline microstructure of mullite in all porcelain samples was studied by X-ray diffraction through analysing 110 and 001 reflections using the Voigt function method and by optical and electron microscopy. Mean crystallite sizes were determined independently for both 110 and 001 diffraction directions as principal semi-quantitative characteristics for all sixteen specimens. They illustrat…
Enhanced chemosensing of ammonia based on the novel molecular semiconductor-doped insulator (MSDI) heterojunctions
2011
Abstract A series of new molecular semiconductor-doped insulator (MSDI) heterojunctions as conductimetric transducers to NH3 sensing were fabricated based on a novel semiconducting molecular material, an amphiphilic tris(phthalocyaninato) rare earth triple-decker complex, Eu2[Pc(15C5)4]2[Pc(OC10H21)8], quasi-Langmuir–Shafer (QLS) film, as a top-layer, and vacuum-deposited and cast film of CuPc as well as copper tetra-tert-butyl phthalocyanine (CuTTBPc) QLS film as a sub-layer, named as MSDIs 1, 2 and 3, respectively. MSDIs 1–3 and respective sub-layers prepared from three different methods were characterized by X-ray diffraction, electronic absorption spectra and current–voltage (I–V) measu…
Influence of the pH on the ZnO nanoparticle growth in supercritical water: Experimental and simulation approaches
2014
Abstract In order to improve the knowledge on the nucleation and the growth mechanisms of metal oxides nanoparticles produced in supercritical water domain, ZnO was used as a “model” material. A continuous process of hydrothermal synthesis was employed to synthesize ZnO nanopowders ( T = 410 °C and P = 305 bar) from Zn(NO 3 ) 2 and KOH solutions with different values of [KOH]/[Zn(II)] ratio from 0 to 8 in order to investigate the pH effect on the growth of ZnO nanocrystallite in terms of size and morphology. The samples were characterized by X-Ray Diffraction and Transmission Electronic Microscopy. ZnO crystal was considered as a cylindrical crystallite with a diameter D and height H . Es…
The mechanically activated combustion reaction in the Fe–Si system: in situ time-resolved synchrotron investigations
2002
Mechanical high-energy ball milling of Fe+2Si elemental powder mixtures was used to activate self sustaining combustion reaction in the case of iron disilicide synthesis. The reaction path as well as the influence of the microstructural parameters on phase transformation have been investigated in detail. Time-resolved X-ray diffraction (TRXRD) using the fast recording kinetics offered by the synchrotron radiation was coupled to an infrared camera in order to study the internal structure of the combustion wave. The crystallite size and the amount of mechanically induced phases play an important role during the combustion; the reaction path and the end product composition mainly depend on the…
X-ray diffraction microstructure analysis of mullite, quartz and corundum in porcelain insulators
2005
Abstract The X-ray diffraction microstructure analysis has been performed on commercial samples of the silica and alumina porcelain insulators obtained at 1300 °C, with the same time of firing. The study was carried out on mullite, corundum and quartz by applying several integral breadth methods (i.e. the Williamson–Hall analysis, the Langford method and the Halder–Wagner approximation) and the Fourier analysis (Warren–Averbach method). The apparent crystallite sizes determined for the mullite are direction-dependent (anisotropic) and within each group of samples, on average, the greatest values are obtained along the direction [0 0 1]. With regard to the microstructure of the corundum and …
Extractive-Pyrolytic Method for Au/MeO<sub>x</sub> Nanocomposites Production
2014
Au/MeOx(MeOx- SiO2, Al2O3and TiO2) nanocomposites have been produced by the extractive-pyrolytic method. An organic extract – a solution of n-trioctylammonium tetrachlorolaurate ([Oct3NH]AuCl4) in toluene – was used as a gold-containing precursor. The produced samples were analyzed by IR spectroscopy, X-ray diffraction and scanning electron microscopy. The performed studies have shown that the mean size of the metal crystallites vary within wide limits: on Al2O3from 60 nm to 35 nm; on SiO2from 33 nm to 23 nm; on TiO2from 50 nm to 13 nm.
X-ray diffraction line-broadening study on two vibrating, dry-milling procedures in kaolinites
2009
Due to the great technological importance of the microstructure of kaolinite, characterizing its evolution during dry milling of kaolin and analyzing the microstructural information obtained from different methods were the main aims of this work. The microstructural alteration of kaolinite is evaluated by X-ray diffraction and electron microscopy methods, comparing the results obtained and analyzing the correlations between them. The Warren-Averbach and Voigt-function methods of X-ray diffraction microstructural analysis have been applied successfully to the study of the effects of two different, vibrating-cup dry-milling configurations in the microstructure of kaolinite from the reflection…