Search results for "Cubic zirconia"
showing 10 items of 107 documents
Zirconia Removable Telescopic Dentures Retained on Teeth or Implants for Maxilla Rehabilitation. Three-Year Observation of Three Cases
2010
Abstract This report addresses maxillary restoration with removable telescopic crown-retained palatal free dentures. One patient with 7 natural teeth (PERIO), a second patient with 6 dental implants (IMPL), and a third patient with 2 natural teeth and 4 dental implants (IMPL-PERIO) were treated. Zirconia copings for natural teeth and individual zirconia implant abutments were fabricated in CAD/CAM and used as primary crowns. Electroformed gold copings were used as secondary telescopes. All maxilla supraconstructions were fabricated with zirconia and CAD/CAM. Patients were monitored during a 3-year period; all teeth and implants survived, and no biological or mechanical complications occurre…
Influence of a Cu–zirconia interface structure on CO2 adsorption and activation
2021
CO2 adsorption and activation on a catalyst are key elementary steps for CO2 conversion to various valuable products. In the present computational study, we screened different Cu–ZrO2 interface structures and analyzed the influence of the interface structure on CO2 binding strength using density functional theory calculations. Our results demonstrate that a Cu nanorod favors one position on both tetragonal and monoclinic ZrO2 surfaces, where the bottom Cu atoms are placed close to the lattice oxygens. In agreement with previous calculations, we find that CO2 prefers a bent bidentate configuration at the Cu–ZrO2 interface and the molecule is clearly activated being negatively charged. Strain…
Globally Optimized Equilibrium Shapes of Zirconia-Supported Rh and Pt Nanoclusters: Insights into Site Assembly and Reactivity
2019
Metal–support interfaces form an active site for many important catalytic reactions. The modeling of these interfacial sites calls for approximations to set up a structure model, which in turn may ...
Osseointegration of one-piece zirconia implants compared with a titanium implant of identical design: a histomorphometric study in the dog
2010
Objective: The aim of this study was to evaluate osseointegration of one-piece zirconia vs. titanium implants depending on their insertion depth by histomorphometry. Material and methods: Four one-piece implants of identical geometry were inserted on each side of six mongrel dogs: (1) an uncoated zirconia implant, (2) a zirconia implant coated with a calcium-liberating titanium oxide coating, (3) a titanium implant and (4) an experimental implant made of a synthetic material (polyetheretherketone). In a split-mouth manner they were inserted in submerged and non-submerged gingival healing modes. After 4 months, dissected blocks were stained with toluidine blue in order to histologically asse…
Zirconia Based Nanomaterials for Oxygen Sensors – Generation, Characterisation and Optical Properties
2007
Microwave driven hydrothermal synthesis and hydrothermal synthesis were used to obtain ZrO2 nanopowders. Their production with varying phase composition, the characterisation and selected optical properties concerning their potential use as luminescence oxygen sensors are reported. It was found that the powders obtained by the microwave driven hydrothermal method and annealed at 750 0C in air show experiment repeatability within an accuracy of 6 %.
THz nanocrystal acoustic vibrations from ZrO2 3D supercrystals
2013
International audience; We report sharp low-frequency Raman spectral features of supercrystals synthesized via the "benzyl alcohol route" and consisting of either yttrium-stabilized or pure zirconia (ZrO2) nanocrystals. In situ formed benzoate species control the nanocrystal growth and act as organic glue leading to the assembly of the nanocrystals in highly ordered 3D supercrystals. We attribute some Raman peaks to THz acoustic vibrations of individual nanocrystals which are only weakly coupled due to the strong acoustic mismatch between the capping ligands and the nanocrystals. Peak positions are consistent with nanocrystal sizes estimated from transmission electron microscopy and X-ray p…
Mechanical behavior of single-layer ceramized zirconia abutments for dental implant prosthetic rehabilitation
2013
Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) and single-layer ceramized zirconia abutments with both internal and external connections that have been developed to enhanced aesthetic restorations. Material and Methods: Sixteen zirconia implant abutments (ZiReal Post®, Biomet 3i, USA) with internal and external connections have been analyzed. Half of the specimens were coated with a 0.5mm-thick layer of a low-fusing fluroapatite ceramic. Mechanical tests were carried out under static (constant cross-head speed of 1mm/min until fracture) and dynamic (between 100 and 400N at a frequency of 1Hz) loading conditions. The failure location was i…
Study of stress effects in the oxidation of Zircaloy-4
2001
Abstract The oxidation of zirconium alloy Zy-4 is due to an anionic diffusion of oxygen leading to the formation of an oxide layer of zirconia. According to the Pilling and Bedworth ratio of the Zr/ZrO 2 system, the oxide scale is under compressive stresses. This stress state may play an important role during the corrosion process, from the phases as well as from the kinetics point of view. In order to better understand the eventual relationship between oxide phases, oxidation kinetics and stresses, an experimental apparatus was developed in our laboratory. It allows the application of external tensile stresses, in situ oxidation of the sample in controlled environment and X-ray diffraction…
Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors
2013
Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10–15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition,…
V-containing ZrO 2 inorganic yellow nano-pigments prepared by hydrothermal approach
2017
Abstract Recent results on the preparation, characterization and color properties of the V-containing ZrO 2 inorganic yellow nano-pigment are reported. A series of monoclinic V-ZrO 2 solid solution nanocrystals (V x Zr 1-x O 2 , being x = 0, 0.1, 0.02, 0.03, 0.04, 0.05, 0.065, 0.08 and 0.1) were prepared straightforward by hydrothermal processing of mixtures of zirconyl nitrate and ammonium metavanadate in water. Interestingly, the crystalline precipitated obtained by hydrothermal processing at 140 °C for 3 d was almost entirely V-containing ZrO 2 nanocrystals with the structure of monoclinic zirconia for the whole range of compositions. Lattice parameters changes along the series of prepar…