Search results for "Curing"
showing 10 items of 102 documents
Effect of silane coupling treatment on the adhesion between polyamide and epoxy based composites reinforced with carbon fibers
2020
The increasing efforts aimed to design structures with reduced weight and better mechanical performances has led in recent years to a growing use of fiber reinforced polymer materials in several fields such as marine. However, these materials can be composed of chemically very different elements and, hence, may be difficult to joint. This research aims to improve the adhesion between a thermoplastic matrix of polyamide reinforced with short carbon fibers (PA12-CR) and a carbon fiber reinforced epoxy matrix (CFRP). Two different silane coupling agents, (3-Aminopropyl)trimethoxysilane (AM) and (3-Glycidyloxypropyl)trimethoxysilane (EP), were applied, through the spray deposition method, on th…
Carbon Fiber Composites Cured by γ-Radiation-Induced Polymerization of an Epoxy Resin Matrix
2008
The use of ionizing radiation in order to initiate polymerization of suitable monomers has found increased interest in the last two decades due to its several advantages. In this work, carbon fiber composites through gamma radiation polymerization of epoxy matrices have been produced for aerospace and advanced automotive applications. Composite samples were produced by irradiation at room temperature using different radiation doses and, as reference, thermal curing of the same epoxy resin formulations was also carried out. Furthermore, some irradiated samples were subjected to postirradiation thermal curing to complete the polymerization reactions. The properties of the cured materials were…
Bulk filling of Class II cavities with a dual-cure composite: Effect of curing mode and enamel etching on marginal adaptation.
2014
Objectives: This study attempted to find a simple adhesive restorative technique for class I and II cavities on posterior teeth. Study Design: The tested materials were a self-etching adhesive (Parabond, Coltene/Whaledent) and a dual-cure composite (Paracore, Coltene/Whaledent) used in bulk to restore the cavities. Class II MO cavities were performed and assigned to 4 groups depending on the orthophosphoric acid (H3PO4) conditioning of enamel and polymerization method used (chemical or dual). Specimens were subjected to quantitative marginal analysis before and after thermo-mechanical loading. Results: Higher percentages of marginal adaptation at the total margin length, both before and aft…
The effect of preheating of composite resin on its color stability after immersion in tea and coffee solutions: An in-vitro study
2019
Background One of the concerns in using composite resins is color change. The aim of this study was to investigate the effect of preheating on color stability of composite resins when immersed in coffee and tea. Material and Methods This experimental study included 60 composite disks. The samples were divided into 2 groups, one group prepared at room temperature and the other prepared at 68 °C. After curing, the samples were placed in 37 °C distilled water for 24 hours. The color of the samples was measured (t0) using spectrophotometer according to CIE-L*a*b* system. The samples of each group were then divided into 3 subgroups and respectively immersed in distillated water, coffee and tea f…
Curing of an epoxy resin modified with nanoclay monitored by dielectric spectroscopy and rheological measurements
2006
Dielectric and rheological measurements have been performed in “real-time” to follow curing reaction on blends of a diglycidyl ether of bisphenol-A epoxy resin with 4,4-methylene bis(2,6-diethylaniline) hardener and different amounts of organically modified nanoclay (Nanofil 919) as modifier. The effect of the modifier and its amount on the curing reaction, as well as that of the curing temperature has been studied. Changes in molecular mobility in the reaction mixture have been investigated by dielectric relaxation spectroscopy. Evolutions of ionic conductivity and main relaxation have been analyzed and vitrification times have been obtained and compared with those obtained by rheological …
Raman and nuclear magnetic resonance investigation of alkali metal vapor interaction with alkene-based anti-relaxation coating.
2016
The use of anti-relaxation coatings in alkali vapor cells yields substantial performance improvements by reducing the probability of spin relaxation in wall collisions by several orders of magnitude. Some of the most effective anti-relaxation coating materials are alpha-olefins, which (as in the case of more traditional paraffin coatings) must undergo a curing period after cell manufacturing in order to achieve the desired behavior. Until now, however, it has been unclear what physicochemical processes occur during cell curing, and how they may affect relevant cell properties. We present the results of nondestructive Raman-spectroscopy and magnetic-resonance investigations of the influence …
Water diffusion and swelling stresses in ionizing radiation cured epoxy matrices
2017
Abstract In this work a DGEBF epoxy monomer was cured by electron beam radiation in the presence of an iodonium salt and the obtained system was hydrothermally aged as such and also after a thermal treatment, in order to obtain two systems having different uniformity in the cross-linking degree. On both systems, the transient stress field arising from swelling was measured and monitored by an optical Photoelastic technique and the results were commented with reference to a thermally cured epoxy system containing the same monomer and already discussed in a previous work. Beam samples with identical dimensions, obtained from the irradiated systems, have been aged at 80 °C in water, and charac…
The effect of a liquid CTBN rubber modifier on the thermo-kinetic parameters of an epoxy resin during a pultrusion process
2003
Abstract Rheo-kinetic behaviour of an epoxy resin, coupled with an anhydride hardener, with different CTBN liquid rubber concentration (0–15 phr), used in fibre reinforced plastics, was analysed comparing experimental data with theoretical models. The modelling of technological pultrusion process for thermoset matrix composites, developed through a numerical code realised with MATLAB, is reported, too. The model includes conduction and cure heat, degree of cure and viscosity evolution during the curing within the die. Considerable differences in process condition, using different rubber amount, are obtained. The numerical modelling of process conditions shows that the CTBN rubber presence i…
Degree of conversion and microhardness of resin cements photoactivated through glass ceramic
2021
Background To assess whether glass-ceramic shade, thickness and translucency affect degree of conversion (DC) and Knoop microhardness (KHN) of resin cements photoactivated using light-emitting diode (LED) or quartz-tungsten-halogen (QTH) units. Material and Methods Glass-ceramic blocks were cut (2, 3 and 4mm) and sintered. For DC FT Raman spectroscopy (n=3), film specimens of cements (RelyX ARC, U200, Veneer, C&B) were obtained. For KHN test (n=3), cements were inserted in cylindrical matrix and covered by polyester strip. Specimens were photoactivated (30s) using LED or QTH according to each group: direct photoactivation (DP), interposing ceramic specimens or no photoactivation (NP). Data …
Effect of curing time on the performances of hybrid/mixed joints
2013
Abstract The aim of this work is the study of a mixed method used for the joining of aluminum alloys with glass reinforced polymer’s substrates (in the next GFRP). In particular, the technique of self-piercing riveting (in the next SPR) was applied on a co-cured joint in order to evaluate the influence of the time of inserting the rivet on the mechanical behavior of the mixed joints. Three different joints were realized: adhesive by co-curing technique, mechanical by self piercing riveting (in the next SPR) and a mixed one in which the joining techniques (i.e. adhesive and mechanical) were combined. In particular, to determine the optimum time to insert the rivet, three different times from…