Search results for "Curing"
showing 10 items of 102 documents
Solid State NMR Spectroscopy Investigation of the Molecular Structure of Epoxy Based Materials Cured in Different Conditions
2012
In this work two epoxy resin model systems, whose monomers are typically used in structural composites, were thermally cured in different cure conditions in order to obtain different cross-linking densities. Their molecular structures were investigated through solid state NMR spectroscopy in order to correlate them to the cure process conditions used and the results were discussed in the light of the dynamical mechanical thermal analysis (DMTA) performed.
Laboratory Tests for Assessing the Reliability and Durability of Innovative Cold-Glued 3D Glass Building Subcomponents
2020
The paper shows the results of analyses of the behavior of an innovative subcomponent made of two glass shells and a plastic thermal belt interfaced with a resin-based adhesive, in order to define the plastic material–adhesive combination able to guarantee compliance with the requirements related to mechanical strength, thermoacoustic insulation, dimensional stability, material compatibility, and durability. Two different types of ultraviolet (UV)-curing adhesive were used to establish the best plastic–adhesive combination. A study of the mechanical behavior and the reliability over time of the bonded assembly was conducted by performing accelerated weathering tests and tensile tests on 30 …
Coffee grounds as filler for pectin: Green composites with competitive performances dependent on the UV irradiation.
2017
Novel composite bioplastics were successfully prepared by filling pectin matrix with treated coffee grounds. The amount of coffee dispersed into the pectin was changed within a wide filler range. The morphology of the pectin/coffee hybrid films was studied by microscopic techniques in order to investigate their mesoscopic structure as well as the sizes distribution of the particles dispersed into the matrix. The micrographs showed that the coffee grounds are uniformly dispersed within the polymeric matrix. The morphological characteristics of the biocomposite films were correlated to their properties, such as wettability, water uptake, thermal behavior and mechanical performances. Dynamic m…
The influence of the rubber carboxyl functionality on the processability and properties of solid rubber modified epoxy mixtures
2005
A high molecular weight, carboxyl functionalised solid rubber was added to an epoxy resin-aromatic amino system developed for autoclave curing of honeycomb core composite structures. The achievement of an optimal balance of viscous flow and viscoelasticity of the resin, by controlling the nature and extent of cross-linking of the functionalised rubber, was proposed as a route to void-free honeycomb skins. The aim of the present investigation is to understand how the concentration of carboxylic groups of the rubber, prereacted with one of the epoxy monomers, affects the matrix resin flow properties. The concentration of carboxyl groups was changed by reacting them with a monofunctional epoxy…
Effect of chlorhexidine on the durability of a new universal adhesive system
2018
Background The effect of chlorhexidine on bond durability of universal adhesives is not clear. The aim of this study was to evaluate the effect of chlorhexidine on 6-month water storage bond strength of adhesive systems. Material and Methods 72 freshly sound human extracted molars were selected. In each tooth both buccal and lingual sides were prepared by bur to reach superficial dentin and randomly divided into 6 groups and 12 sub-groups and bonded with Scotchbond Universal (SBU) or Scotchbond Multi-purpose (SBMP) with/without chlorhexidine (CHX) usage. Group 1: SBU, group2: SBU+CHX, group3: Etch+SBU, group4: Etch+CHX+SBU, group5: Etch+SBMP, group6: Etch+CHX+SBMP. After composite curing, w…
Reduction of Polymerization Shrinkage Stress and Marginal Microleakage Using Soft-Start Polymerization
2003
Purpose: This study evaluated the influence of a soft-start light-curing exposure on polymerization shrinkage stress and marginal integrity of adhesive restorations. Materials and Methods: Six resin-based composites (Pertac II, Tetric Ceram, Definite, Surefil, Solitaire, and Visio-Molar) were adhesively bonded to a cylindrical cavity (n = 9 per material/light) in a photoelastic material. Visible light-curing was applied using either the standard polymerization mode (800 mW/cm2 exposure duration 40 s) of the curing light (Elipar TriLight, 3M ESPE) or the exponential mode from the same device (ramp-curing: 150 mW/cm2 to 800 mW/cm2 within the first 15 s of a total curing time of 40 s). Polymer…
Morphology, flexural, and thermal properties of sepiolite modified epoxy resins with different curing agents
2006
A bisphenol A-based epoxy resin was modified with 5 wt% organically modified sepiolite (Pangel B40) and thermally cured using two different curing agents: an aliphatic diamine (Jeffamine D230, D230) and a cycloaliphatic diamine (3DCM). The morphology of the cured materials was established by scanning and transmission electron microscopy analysis. The thermal stability, thermo-mechanical properties, and flexural behaviour of the sepiolite-modified matrices were evaluated and compared with the corresponding neat matrix. The initial thermal decomposition temperature did not change with the addition of sepiolite. The flexural modulus of the epoxy matrix slightly increases by the incorporation o…
Nonporous, Strong, Stretchable, and Transparent Electrospun Aromatic Polyurea Nanocomposites as Potential Anticorrosion Coating Films
2021
This study, for the first time, focused on the fabrication of nonporous polyurea thin films (~200 microns) using the electrospinning method as a novel approach for coating applications. Multi-walled carbon nanotubes (MWCNTs) and hydrophilic-fumed nanosilica (HFNS) were added separately into electrospun polyurea films as nano-reinforcing fillers for the enhancement of properties. Neat polyurea films demonstrated a tensile strength of 14 MPa with an elongation of 360%. At a loading of 0.2% of MWCNTs, the highest tensile strength of 21 MPa and elongation of 402% were obtained, while the water contact angle remained almost unchanged (89°). Surface morphology analysis indicated that the producti…
Ionizing radiation induced curing of epoxy resin for advanced composites matrices
2005
Abstract The radiation curing of an epoxy monomer in the presence of an iodonium salt, as photo initiator, is studied. Systems with different concentrations of photo initiators have been polymerized via both gamma rays and e-beam, at various dose rates. The aim of this work is to investigate how the photo initiator concentration and the irradiation dose rate affect the temperature of the systems during curing and how the different thermal histories influence the dynamic mechanical thermal properties of the obtained materials.
Pulse radiolysis and theoretical investigation on the initial mechanism of the e-beam polymerization of epoxy resins. The results obtained on (phenox…
2007
Abstract The radical cation of (phenoxymethyl)oxirane ( PGE ⋅ + ) is generated by pulse radiolysis in dichloromethane solution and by direct action of radiation on the title compound. In the pure system its UV–vis spectrum is characterized by two bands at 340 and 430 nm, such that the electronic structure corresponds to a dipole bearing the positive charge on the phenoxy side. At the same time, the phenoxy-oxirane bridge is weakened. Then, the radical cation fragments into a phenoxonium ion and an oxyranylmethyl radical ( k PGE - fragm = 1.16 × 10 7 s - 1 ) . The latter immediately rearranges to an allyloxyl radical by ring opening. It is then conceived that the action of onium salts, as ra…