Search results for "DISPERSION"
showing 10 items of 1101 documents
Citrate–nitrate auto-combustion synthesis of perovskite-type nanopowders: A systematic approach
2009
Abstract Citrate–nitrate auto-combustion synthesis is used to prepare an iron, a cobalt and a cerium-perovskite. The influence of different synthesis conditions on the combustion process, phase composition, textural and morphological properties is studied in detail by X-ray diffraction, nitrogen adsorption and scanning electron microscopy. Results show that the combustion intensity increases from iron, to cerium, to cobalt-perovskite. Conversely, the combustion intensity decreases and thus the safety and the gain of the combustion process increase by using high fuel/oxidant ratios, low pH values or combustion reactors with high heat dispersion capacity. High fuel/oxidant ratios increase par…
Spray-Drying, Solvent-Casting and Freeze-Drying Techniques: a Comparative Study on their Suitability for the Enhancement of Drug Dissolution Rates.
2019
Purpose Solid dispersions (SDs) represent the most common formulation technique used to increase the dissolution rate of a drug. In this work, the three most common methods used to prepare SDs, namely spray-drying, solvent-casting and freezedrying, have been compared in order to investigate their effect on increasing drug dissolution rate. Methods Three formulation strategies were used to prepare a polymer mixture of polyvinyl-alcohol (PVA) and maltodextrin (MDX) as SDs loaded with the following three model drugs, all of which possess a poor solubility: Olanzapine, Dexamethasone, and Triamcinolone acetonide. The SDs obtained were analysed and compared in terms of drug particle size, drug-lo…
Gold Nanoparticles on 3D-Printed Filters : From Waste to Catalysts
2019
Three-dimensionally printed solid but highly porous polyamide-12 (PA12) plate-like filters were used as selective adsorbents for capturing tetrachloroaurate from acidic solutions and leachates to prepare PA12–Au composite catalysts. The polyamide-adsorbed tetrachloroaurate can be readily reduced to gold nanoparticles by using sodium borohydride, ascorbic acid, hydrogen peroxide, UV light, or by heating. All reduction methods led to polyamide-anchored nanoparticles with an even size distribution and high dispersion. The particle sizes were somewhat dependent on the reduction method, but the average diameters were typically about 20 nm. Particle sizes were determined by using a combination of…
A green method to prepare nanosilica modified graphene oxide to inhibit nanoparticles re-aggregation during melt processing
2017
Abstract A graphene oxide-silica nanohybrid (GOS), self-assembled into a lasagna -like structure, was prepared in water and used as a filler for the melt preparation of polyamide 6 (PA6)-based nanocomposites. For sake of comparison, PA6-based materials were prepared under the same processing conditions by adding GO only or a physical mixture of GO and silica (GO+S). All the materials were characterized from a morphological, spectroscopic, thermal, dynamic-mechanical (DMA) and mechanical point of view. For all the nanocomposites, the interphase was studied either by analyzing loss factor plots coming from DMA measurements and by implementing a novel approach, i.e. combining solvent extractio…
Aqueous Dilution of Noble NPs Bulk Dispersions: Modeling Instability due to Dissolution by AF4 and Stablishing Considerations for Plasmonic Assays
2020
Among different nanomaterials, gold and silver nanoparticles (AuNPs and AgNPs) have become useful tools for a wide variety of applications in general, and particularly for plasmonic assays. Particle size and stability analysis are key elements for their practical applications since the NPs properties depend on these parameters. Hence, in the present work, asymmetrical flow field flow fractionation (AF4) coupled to UV-Vis and dynamic light scattering (DLS) detectors in series, has been evaluated for stability studies of citrate-capped AuNPs and AgNPs aqueous dispersions. First, experimental parameters, such as mobile phase or cross-flow rate were optimized. Sodium azide to pH 7 for AuNPs and…
Curvature radius measurement by optical profiler and determination of the residual stress in thin films
2019
Abstract The Stoney formula, based on the measurement of the substrate curvature, is often used for the determination of the thin films' residual stress. In this study, titanium nitride coatings were deposited by DC reactive magnetron sputtering on silicon substrates. An optical profiler was used to determine the curvature of the surface before and after coating. Two radii were then obtained, along the principal perpendicular directions of the surface curvature. A simple and efficient method to determine the experimental error on the stress calculation was developed taking into account the film thickness dispersion and the radii dispersion. Using constant deposition parameters, some samples…
Molecular structure and multi-body potential of mean force in silica-polystyrene nanocomposites
2018
We perform a systematic application of the hybrid particle-field molecular dynamics technique [Milano et al, J. Chem. Phys. 2009, 130, 214106] to study interfacial properties and potential of mean force (PMF) for separating nanoparticles (NPs) in a melt. Specifically, we consider Silica NPs bare or grafted with Polystyrene chains, aiming to shed light on the interactions among free and grafted chains affecting the dispersion of NPs in the nanocomposite. The proposed hybrid models show good performances in catching the local structure of the chains, and in particular their density profiles, documenting the existence of the "wet-brush-to-dry-brush" transition. By using these models, the PMF b…
Dispersion-optimized multicladding silicon nitride waveguides for nonlinear frequency generation from ultraviolet to mid-infrared
2016
Nonlinear frequency conversion spanning from the ultraviolet to the mid-infrared (beyond 2.4 μm) is experimentally demonstrated in multicladding silicon nitride (𝑆𝑖𝑋𝑁𝑌) waveguides. By adjusting the waveguide cross-section the chromatic dispersion is flattened, which enhances both the efficiency and the bandwidth of the nonlinear conversion. How accurately the dispersion is tailored is assessed through chromatic dispersion measurements and an experiment/simulation comparison of the dispersive waves' wavelength locations. Undesirable fluctuations of both the refractive index and the dimensions of the waveguide during the fabrication process result in a dispersion unpredictability of at l…
CNT and Graphene Growth: Growing, Quality Control, Thermal Expansion and Chiral Dispersion
2017
The chapter presents and discusses the production of graphene sheets of carbon nanotubes (CNT) of various types. The Iijima arc discharge method, following the purification methods, is described identifying advantages and disadvantages. Several types of non-regularities such as the Stone–Wales defect and corner effect, which locally increases reactivity, are described from the structural point of view. The laser ablation method is presented as one of the most prominent methods in the production of CNTs. The catalytic chemical vapour deposition (CVD) method is a very effective tool for the controlled production of different carbon shells. The sporadic and simulated growth of CNTs depends on …
Dielectric properties of PMN+2%Li 2 O at low frequencies
2012
The reported study is focused on effects of the admixture of lithium (2% Li2O) on the low-frequency dielectric response in lead magnesium niobate ceramics over the 100 -300 K range of temperature. The obtained results reveal an essential thermal broadening of the e′(ν) spectra specific to relaxor ferroelectrics. Dispersion Δe′ = e′1Hz-e′1kHz and values of e′′(ν) in lead magnesium niobate ceramics containing Li are well described by the Cole-Cole equation at temperatures below the e′(T) maximum. Based on the analysis of the experimental data admixture of lithium is suggested to promote formation of domains in lead magnesium niobate ceramics (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)