Search results for "DISPLACEMENT"
showing 10 items of 433 documents
Mixed Mode Delamination Analysis by a Thermodynamically Consistent Cohesive Interface Model with Independent Mode I and Mode II Fracture Energies
2015
Abstract In the present paper a new thermodynamically consistent cohesive interface model is proposed; it based on a predefined Helmhotz free energy with a single scalar damage variable and produces two independent fracture energies, in pure mode I and pure mode II debonding conditions. The proposed model can also take in to account the frictional effects with a smooth transition of the mechanical behaviour, from the initial cohesive one of the sound material, to the frictional one of the fully debonded interface. The cohesive-frictional behaviour is based on the mesoscale geometric interpretation of the scalar damage variable, which distinguish sound and debonded fractions of a representat…
Evaluation of the fracture performance of different rubberised bitumens based on the essential work of fracture
2017
The fracture performance of rubberised bitumen in addition to one pre-treated with a Warm Mix Additive (Sasobit®) was investigated using different test methods measuring different damage mechanisms. Two Recycled Tyre Rubber (RTR) modifiers together with two base binders were blended in the laboratory to produce various combinations of Recycled Tyre Rubber Modified Bitumens (RTR-MBs). The first RTR is a standard recycled polymer derived from discarded truck and passenger car tyres by ambient grinding. The second RTR consists of 100% recycled truck tyres derived by cryogenic grinding and pre-treated with special oil and WMA to allow further decrease of asphalt mixture production temperatures.…
Synthesis of self-standing Pd nanowires via galvanic displacement deposition
2009
This work shows that it is possible to obtain self-standing Pd nanowires into anodic alumina membranes by a simple metal displacement deposition. By using a proper arrangement, specifically designed in order to optimize the process, polycrystalline Pd nanowires were deposited from a solution containing Pd(NH3)4(NO3)2 as precursor. Morphological analysis showed the formation of perfectly aligned nanowires with a uniform diameter throughout the entire length. This last parameter was controlled by both the deposition time and the ratio between the anodic area (active metal) and the cathodic area (pore bottom). Keywords: Displacement deposition, Template synthesis, Palladium nanowires, Alumina …
Redesign of the Geometry of Parts Produced from PBT Composite to Improve Their Operational Behavior
2021
Parts produced from PBT-GF30 (70% polybutylene terephthalate +30% fiberglass) are very often used in car construction, due to the properties of this material. The current trend is to make parts with a shape designed to be as complex as possible, to take over many functions in operation. During the research, a part that is a component of the structure of car safety systems, and that must be completely reliable in operation, was analyzed. This piece has a complex shape that involves the intersection of several walls. Thus, the research aimed at establishing the optimal radius of connection between the walls (R), the ratio between the thickness of the intersecting walls (K) and the angle of in…
Surface acceleration during dry laser cleaning of silicon
1999
We report on measurements of the surface acceleration for the application of dry laser cleaning. For that purpose, industrial silicon samples were irradiated by a frequency-doubled Q-switched Nd:YAG laser. The surface displacement was measured by a heterodyne interferometer and recorded by a digital storage oscilloscope. Several hundreds of shots were averaged to give smooth displacement curves which could be derived numerically. The experiments show that the highest accelerations, which are thought to be responsible for the cleaning, occur on the time scale of the laser pulse. Simple theoretical models are in good agreement with the experimental data. The maximal displacement depends only …
Some aspects of formation and tribological properties of silver nanodumbbells.
2013
In this paper, metal nanodumbbells (NDs) formed by laser-induced melting of Ag nanowires (NWs) on an oxidized silicon substrate and their tribological properties are investigated. The mechanism of ND formation is proposed and illustrated with finite element method simulations. Tribological measurements consist in controllable real-time manipulation of NDs inside a scanning electron microscope (SEM) with simultaneous force registration. The geometry of NDs enables to distinguish between different types of motion, i.e. rolling, sliding and rotation. Real contact areas are calculated from the traces left after the displacement of NDs and compared to the contact areas predicted by the contact m…
Light-induced ionic processes in optical oxide glasses
1991
Abstract The density of optical glasses is changed by the influence of light capable of generating color centers in these materials. Such defect generation is not only an electronic process, but an atomic displacement is also necessary. The strong localization of electronic and vibrational excitations in the glass network leads to the high efficiency of sub-threshold defect generation. Secondary ionic processes lead to the changes of basic glass properties (light refractive index, density, mechanical strength, etc.); thus, it is possible to use optical glasses as light detectors for appropriate wavelengths.
Experimental Study Regarding of Bending Behaviour of Stabilizator Link
2016
Abstract This paper presents an experimental study of the behavior of anti-roll power link subjected to bending, power link coming from an Opel Astra G. The power link is made of PA66 GF30 polyamide. For this study, there were used a universal testing machine (Instron 5587) and a real-time strain measurement optical system (Aramis). The results showed are those obtained in the case of a compression force of 1,000 [N] namely: major Strain ε1, minor strain ε2, equivalent von Mises strain, displacement on X axis, displacement on Y axis (compression force direction), displacement on Z axis.
Solid-fluid interaction in a pillar-based phononic crystal
2016
In this paper, we investigate the wave dispersion of two dimensional pillar-based phononic crystal surrounded in liquid medium. An unit cell structure with reduced pillar height (hp/a)=0.5 and reduced radius (rp/a)=0.3 is simulated using Finite Element Method. The geometrical parameter is chosen to demonstrate a local resonance mechanism that allow the confinement of elastic energy at the interface between the solid and the fluid. In order to identify the energy distribution, we represent the eigenmode at high symmetry (point X) in the first Brillouin zone. The decreasing trend of frequency is also boosted with the increase of pillar height. From the total displacement, the energy is mostly…
Analysis of Rectangular Orthotropic Membranes for Mechanical Properties Identification through Load-Displacement Data
2021
In this paper, an innovative procedure is introduced for the identification of the mechanical properties of orthotropic membranes based on load-displacement data. To this end, novel functional forms of the displacement components for rectangular membranes are appropriately introduced. Unknown coefficients of these displacement functions are determined, minimizing the total potential energy of the membrane. The energy method is then combined with an optimization procedure to estimate the elastic constants of the membranes in a straightforward manner. Specifically, a genetic algorithm is used to minimize a properly defined objective function directly related to the sought mechanical propertie…