Search results for "Denticity"
showing 10 items of 376 documents
Copper(II)-assisted hydrolysis of 2,4,6-tris(2-pyrimidyl)-1,3,5-triazine (tpymt): syntheses, crystal structures and magnetic properties of [Cu(bpcam)…
2005
Abstract The reaction of the 2,4,6-tris(2-pyrimidyl)-1,3,5-triazine (tpymt) ligand with copper(II) perchlorate or sulfate in aqueous solution affords complexes [Cu(bpcam)(H2O)2]ClO4 · 3H2O (1), [Cu(bpcam)(H2O)2][Cu(bpcam)(H2O)(SO4)] · 2H2O (2) and [Cu2(bpcam)2(H2O)2(SO4)] · H2O (3) [bpcam = bis(2-pyrimidylcarbonyl)amidate], whose structures have been determined by single-crystal X-ray diffraction studies. Copper(II) promotes the hydrolysis of tpymt in mild conditions yielding the bpcam group which is present in the structures of 1–3 as a tridentate ligand. The structure of 1 consists of mononuclear [Cu(bpcam)(H2O)2]+ cations, uncoordinated perchlorate anions and water of crystallization. Th…
[3]Rotaxanes and [3]pseudorotaxanes with a rigid two-bidentate chelate axle threaded through two coordinating rings
2009
New [3]rotaxanes and [3]pseudorotaxanes have been synthesised using the “gathering and threading” effect of copper(I). By using click chemistry as the “stoppering” reaction, a good yield of the [3]rotaxane was obtained, either as a dicopper complex or as a metal-free compound after demetallation. The axle contains a central rigid aromatic block incorporating two bidentate chelates, and the threaded macrocycles are 30-membered rings. A model dicopper(I) [3]pseudorotaxane whose axle was end-functionalised by triisopropylsilyl groups could be crystallised and studied by X-ray diffraction. A particularly attractive structure was obtained showing a “slanted” geometry for the two rings and the ax…
Synthesis and properties of an Au6 cluster supported by a mixed N-heterocyclic carbene–thiolate ligand
2020
The preparation of a novel Au6 cluster bearing a bidentate mixed carbene–thiolate ligand is presented. The length of linker between the central benzimidazole and thiolate has a strong effect on the formation of cluster products, with a C2 chain giving an Au6 cluster, while a C3 chain results in no evidence of cluster formation. Density functional theory analysis predicts a non-metallic cluster with a large HOMO–LUMO (3.2–3.6 eV) and optical gap.
Synthesis, structural investigations on organotin(IV) chlorin-e6 complexes, their effect on sea urchin embryonic development and induced apoptosis
2004
Four new organotin(IV) chlorin derivatives, [chlorin=chlorin-e(6)=21H,23H-porphine-2-propanoic acid, 18-carboxy-20-(carboxymethyl)-8-ethenyl-13-ethyl-2,3-di-hydro-3,7,12,17-tetramethyl-(2S-trans)-], with formula (R(2)Sn)(3)(chlorin)(2).2H(2)O (R=Me, n-Bu) and (R(3)Sn)(3)chlorin.2H(2)O (R=Me, Ph) have been synthesized. The solid state and solution phase structures have been investigated by FT-IR, (119)Sn Mössbauer, (1)H and (13)C NMR spectroscopy. In the solid state, (R(2)Sn)(3)(chlorin)(2).2H(2)O complexes contain six coordinated Sn(IV), in a skew trapezoidal environment by forming trans-R(2)SnO(4) polymeric units. As far as (R(3)Sn)(3)chlorin.2H(2)O complexes are concerned, Sn(IV) is five …
New phosphathiamacrocycles containing polypypiridine units
2006
Abstract A new 2,2′-bipyridine-based phosphadithiamacrocycle: 3,3′-5-phenyl-2,8-dithia-5-phospha[9]-2,2′-bipyridinophane (L) has been synthesized by reacting 6,6′-bis(bromomethyl)-2,2′-bipyridine and dilithium 3-phenyl-3-phosphapenta-1,5-dithiolate. The phosphoryl derivative: 3,3′-5-oxo-5-phenyl-2,8-dithia-5-phospha[9]-2,2′-bipyridinophane (Lox) synthesized by direct oxidation of L at open atmosphere. Both compounds have been isolated as white solids containing different amounts of LiBr. The reaction of acetonitrile solutions of these solids with Fe(II) perchlorate gave the complexes [FeBr(L)](ClO4) · 2H2O and [FeBr(Lox)](ClO4) · 3H2O, which were crystallized as [FeBr(L)]Br · H2O and [ FeBr…
Cadmium and Zinc Adsorption onto Activated Carbon: Influence of Temperature, pH and Metal/Carbon Ratio
1996
The adsorption characteristics of cadmium and zinc onto a granular activated carbon were studied. Cadmium and zinc removals increased on raising pH and temperature, and decreased on raising the molar metal/carbon ratio. The adsorption processes were modelled using the surface complex formation (SCF) Triple Layer Model (TLM) with an overall bidentate species. A dependence of the SCF constant on pH, the molar metal/carbon ratio and temperature was observed, and a correlation for log K ads was determined. The SCF model successfully predicted cadmium and zinc removals.
Tantalocene complexes as bidentate métalloligands: (C5Me5)(C5H4X)Ta(H2)(PPh2) (C5Me5) (C5H4X)Ta(CO) (PPh2) (X = PPh2, CH2CH2NMe2)
1999
Abstract The synthesis of new bidentate metalloligands derived from tantalocene (C5Me5)(C5H4X)Ta(H2)(PPh2) (X = PPh2, 2P; X = CH2CH2NMe22N) and (C5Me5)(C5H4X)Ta(CO)(PPh2) 4(P,N) is described. When opposed to chromium unsaturated fragments the phosphino functionalised complexes 2P and 4P act as chelating bidentate ligands affording Ta(V) (C5Me5)(C5H4PPh2)Ta(CH2) (μ-PPh2)Cr(CO)4 or Ta(III) (C5Me5)(C5H4PPh2)Ta(CO)(μ-PPh2)Cr(CO)4 bimetallic complexes. The same reaction carried out starting from 2N gives rise to a μ-phosphido, μ-hydrido dibridged complex Cp*(C5H4CH2CH2NMe2)TaH(μ-H)(μ-PPh2)Cr(CO)4.
Chelated η5-cyclopentadienyl-η-ethyl complexes of molybdenum and tungsten; molecular structure of W(η5-C5H4CH2-η-CH2)(CO)3
2000
Abstract Molybdenum and tungsten complexes M(η5-C5H4CH2-η-CH2)(CO)3 (M=Mo, W) containing the bidentate ethyl-functionalized cyclopentadienyl ligand C5H4CH2CH2 have been synthesized by the reaction of spiro[2.4]hepta-4,6-diene with M(CO)3L3 (M=Mo; L3=1,3,5-C6H3Me3; M=W; L=NCMe). Reaction of the more stable tungsten complex with C6H5ICl2 and HBF4 gave complexes of the type W(η5-C5H4CH2CH2Cl)(CO)3Cl, W(η5-C5H4CH2CH3)(CO)3Cl and W(η5-C5H4CH2CH3)(CO)3(FBF3), respectively. The crystal structure of the tungsten tricarbonyl complex W(η5-C5H4CH2-η-CH2)(CO)3 has been determined by X-ray crystal diffraction on a single crystal and shows a four-legged piano stool structure.
Bidentate pyridyl‐NHC ligands: synthesis, ground and excited state properties of their iron(II) complexes and role of the fac/mer isomerism
2021
International audience; Iron complexes are promising candidates for the development of sustainable molecular photoactive materials as an alternative to those based on precious metals such as Ir, Pt or Ru. These compounds possess metal-ligand charge transfer (MLCT) transitions potentially of high interest for energy conversion or photocatalysis applications if the ultrafast deactivation via lower-lying metal-centred (MC) states can be impeded. Following an introduction describing the main design strategies used so far to increase the MLCT lifetimes, we review some of our latest contributions to the field regarding bidentate Fe(II) complexes comprising N-heterocyclic carbene ligands. The disc…
Structural and Electrochemical Studies of Copper(I) Complexes with Diethoxyphosphoryl-1,10-phenanthrolines
2014
Two series of copper(I) complexes with diethoxyphosphoryl-substituted 1,10-phenanthroline ligands were synthesized and characterized in the solid state and in solution. The first comprised mixed-ligand CuI complexes with phenanthroline and triphenylphosphine. The second series includes bis-chelates with two phenanthroline ligands. According to the X-ray data for the six complexes, the ditopic phenanthroline ligands exhibit bidentate coordination to the copper(I) atom through two nitrogen atoms in both series. Solution equilibria involving different phenanthroline copper(I) species were studied by 1H and 31P NMR spectroscopy, electrochemistry, and spectroelectrochemistry. The solution specia…