Search results for "Desalination."
showing 10 items of 126 documents
Valorization of surface-water RO brines via Assisted-Reverse Electrodialysis for minerals recovery: Performance analysis and scale-up perspectives
2022
Reverse osmosis (RO) processes have been recently identified as mostly capable of quantitative removal of salts and contaminants from saline and surface waters, though posing the problem of a concentrated brine to be disposed of and a produced permeate too low in minerals, thus requiring a sometimes expensive remineralization step. In the present paper, Assisted-Reverse Electrodialysis (A-RED) has been proposed for the remineralization of surface-water RO permeate by recovering minerals from its brine. A purposely developed and validated model has been adopted to carry out a parametric analysis for design and optimization of an industrial-scale plant. The techno-economic analysis underlined…
A 2-D model of electrodialysis stacks including the effects of membrane deformation
2021
Abstract Membrane-based processes have gained a relevant role in many engineering applications. Much effort has been devoted to thoroughly understand the fundamental phenomena behind them. However, membrane deformation has been taken into consideration only recently, although much evidence has shown its impacts in many applications. This work presents a novel 2-D, multi-scale, semi-empirical process model able to predict the behavior and the performance of Electrodialysis (ED) systems in cross-flow configurations in the presence and absence of local membrane deformations. The model exploits the results and the simulation approaches of previous fluid-structure investigations performed by the…
CFD Investigation of Spacer-Filled Channels for Membrane Distillation
2019
The membrane distillation (MD) process for water desalination is affected by temperature polarization, which reduces the driving force and the efficiency of the process. To counteract this phenomenon, spacer-filled channels are used, which enhance mixing and heat transfer but also cause higher pressure drops. Therefore, in the design of MD modules, the choice of the spacer is crucial for process efficiency. In the present work, different overlapped spacers are investigated by computational fluid dynamics (CFD) and results are compared with experiments carried out with thermochromic liquid crystals (TLC). Results are reported for different flow attack angles and for Reynolds numbers (Re) ran…
Performance comparison between overlapped and woven spacers for membrane distillation
2017
The sustainable production of freshwater from seawater desalination is receiving increasing attention. Recently, some desalination technologies are taking advantage from the coupling with renewable resources; among them, membrane distillation (MD) is one of the most promising since it can be easily powered by low-grade thermal energy. MD being an emerging technology, efforts are required to optimize geometry and operating conditions of real units in order to reduce the unitary freshwater production cost. In particular, temperature polarization is a well-known detrimental effect for the process driving force; spacers are traditionally used to enhance mixing and make temperature boundary laye…
Electrodialysis for water desalination: A critical assessment of recent developments on process fundamentals, models and applications
2018
Abstract The need for unconventional sources of fresh water is pushing a fast development of desalination technologies, which proved to be able to face and solve the problem of water scarcity in many dry areas of the planet. Membrane desalination technologies are nowadays leading the market and, among these, electrodialysis (ED) plays an important role, especially for brackish water desalination, thanks to its robustness, extreme flexibility and broad range of applications. In fact, many ED-related processes have been presented, based on the use of Ion Exchange Membranes (IEMs), which are significantly boosting the development of ED-related technologies. This paper presents the fundamentals…
Seawater Desalination for Freshwater Production
2009
In the last decades more and more countries have experienced water scarcity problems, thus pointing at alternative non-conventional sources of fresh water. Seawater desalination has proven to be a reliable and economically sustainable water resource since the second half of the 20th Century. A number of well proven technologies already exist, with advantages and disadvantages making each of them more suitable in specific sites. Moreover, quite recently, coupling the use of renewable energy to the production of fresh water from seawater results in novel technologies, able to minimise the environmental impact that desalination processes can create due to their intense energy consumptions.
CHP retrofit for a large Med-Tvc Desalination Plant: High efficiency assessment for different design options under the current legislative EU framewo…
2015
Integrated power plants in "dual purpose" configuration may represent a viable option for energy cost abatement of desalted water produced by MED-TVC (Multiple Effect Distillation along with Thermal Vapour Compression). In this paper an existing large MED-TVC plant with a 36,000 m(3)/day capacity is studied: a plant retrofit is designed, based on a steam power plant with condensation and steam extraction used to drive the steam ejector. As the plant operates in CHP (Combined Heat and Power) mode, the possibility to assess the integrated "CHP + MED-TVC" as high efficiency cogeneration according to Directive 2004/8/EC is discussed. Based on a model developed in Engineering Equation Solver, a …
REAPOWER – USE OF DESALINATION BRINE FOR POWER PRODUCTION THROUGH REVERSE ELECTRODIALYSIS
2015
Salinity gradient power (SGP) represents a viable renewable energy source associated with the mixing of two solutions of different salinities. Reverse electrodialysis (SGP-RE or RED) is a promising technology to exploit this energy source and directly generate electricity. However, although the principle of this technology is well known since several years, further R&D efforts are still necessary in order to explore the real potential of the SGP-RE process. With this regard, the aim of the REAPower project ( [GRAPHICS] ) is the development of an innovative system for power production by SGP-RE process, using sea (or brackish) water as a diluted solution and brine as a concentrate. The use o…
Water desalination by capacitive electrodialysis: Experiments and modelling
2020
Abstract Electrodialysis-related technologies keep spreading in multiple fields, among which water desalination still plays a major role. A new technology that has not yet been thoroughly investigated is capacitive electrodialysis (CED), which couples the standard ED with capacitive electrodes. CED has a number of advantages such as removal of toxic products and system simplification. Little mention is made of this technology in the literature and, to the best of our knowledge, no modelling works have ever been presented. In this work, the CED process has been studied through experiments and modelling. A CED model is presented for the first time. With a simple calibration based on macroscop…
Reactive crystallisation process for magnesium recovery from concentrated brines
2014
Seawater brines, generated either by natural or anthropic processes, often cause significant environmental issues related to their disposal. A clear example is the case of brines from desalination plants, which can have severe environmental impacts on the receiving water body. On the other side, brines can represent a rich and appealing source of raw materials, especially when they are very concentrated, as it happens with bitterns (i.e. exhausted brines) produced in saltworks. In particular, magnesium concentration can reach values up to 30-40 kg/m3 of brine, which is 20-30 times that of typical seawater. An experimental campaign has been carried out in the present work for assessing the p…