Search results for "Destructive testing"
showing 10 items of 88 documents
In-situ NDT testing procedure as an integral part of failure analysis of historical masonry arch bridges
2015
Abstract A nineteenth-century masonry arch bridge was analyzed as an illustrative example to explain the role of in-situ test campaigns in failure analysis and retrofit design. Test results were studied to find out the advantages of each technique, with the aim of proposing an optimized in-situ testing procedure. Standard static penetrometer, flat jack, thermographic and georadar in-situ tests were conducted. Traffic effects were analyzed by means of vibrational tests. The experimental analysis performed to investigate damage on the bridge structures shows the degree of reliability offered by each technique in evaluating specific information and reproducing the global behavior of the struct…
Thermal NDE of thick GRP panels by means of a Pulse Modulated Lock-In Thermography technique
2010
This work describes the development and implementation of an infrared thermal NDE procedure for the evaluation of subsurface defects. The approach is called Pulse-Modulated Lock-In Thermography (PMLT) and is based on the analysis of the frequency response of the measured temperature and comparison with the carrier frequencies launched by the external heat delivering source. The heat deposited on the object is in particular modulated as a train of square waves. This is easily achieved by periodically shuttering the heat source. The temperature is then sampled throughout the deposition of a few square waves. A lock-in algorithm is then implemented able to selectively filter out components at …
Early detection of mechanical damage in mango using NIR hyperspectral images and machine learning
2014
Mango fruit are sensitive and can easily develop brown spots after suffering mechanical stress during postharvest handling, transport and marketing. The manual inspection of this fruit used today cannot detect the damage in very early stages of maturity and to date no automatic tool capable of such detection has been developed, since current systems based on machine vision only detect very visible damage. The application of hyperspectral imaging to the postharvest quality inspection of fruit is relatively recent and research is still underway to find a method of estimating internal properties or detecting invisible damage. This work describes a new system to evaluate mechanically induced da…
Detection of disbonds in multilayer structures by laser-based ultrasonic technique
2008
Adhesively bonded multi-layer structures are frequently used, mostly in the aerospace industry, for their structural efficiency. Nondestructive evaluation of bond integrity in these types of structures, both after manufacturing and for periodic inspection during service, is extremely important. A laser-based ultrasonic technique has been evaluated for non-contact detection of disbonds in aluminum multi-layer structures. Two configurations have been used to detect disbonded areas: pitch-catch with unidirectional guided wave scan and through-transmission with bidirectional scan. Guided wave scanning was done with a laser line source and air-coupled transducer sensing at 500 kHz, 1 ;MHz, and 2…
Granular chains for the assessment of thermal stress in slender structures
2015
Slender beams subjected to compressive stress are common in civil and mechanical engineering. The rapid in-situ measurement of this stress may prevent structural anomalies. In this paper, we describe the coupling mechanism between highly nonlinear solitary waves (HNSWs) propagating along an L-shaped granular system and a beam in contact with the granular medium. We evaluate the use of HNSWs as a tool to measure stress in thermally loaded structures and to estimate the neutral temperature, i.e. the temperature at which this stress is null. We investigated numerically and experimentally one and two L-shaped chains of spherical particles in contact with a prismatic beam subjected to heat. We f…
A new calculation procedure for non-uniform residual stress analysis by the hole-drilling method
1998
The hole-drilling method is one of the most used semi-destructive techniques for residual stress analysis in mechanical parts. In the presence of non-uniform residual stress, the stress field can be determined from the measured relaxed strains using several calculation methods, but the most used one is the so-called integral method. This method is characterized by some simplifications that lead to approximate results, especially when the residual stress varies abruptly. In this paper a new calculation procedure called the spline methods is proposed, which allows these drawbacks to be overcome. Numerical simulations and an experimental test have corroborated the best performance of the prop…
Defect detection in additively manufactured titanium prosthesis by flying laser scanning thermography
2018
Abstract Metal additive manufacturing is nowadays a well-established technology for cutting edge applications in the automotive, aerospace, defense and medical sectors. Since additive metal deposition is basically a welding method, which creates parts by successively adding layers of material, there is a chance for defects like pores, cracks, inclusions and lack of fusion to develop. As a matter of fact, interlayer and intralayer defects are often observed in additive manufactured components. However, if one considers the typical end applications along with the high costs involved in metal additive manufactured components, a “zero defect” target is close to mandatory for this technology. Pl…
Flying laser spot thermography for the inspection of aerospace grade Fibre Metal Laminates
2017
This work analyses a Non Destructive Testing approach for the detection of interlayer disbonds in aerospace grade Fibre Metal Laminates (FMLs). The NDT setup consists of a continuous laser, focused and moved over the material surface, while an IR thermal camera acquires its thermal footprint. A numerical model of the NDT setup is presented, where the material thermal response is analysed to evaluate the features of the defects signatures. In particular, the response from various types of FMLs is evaluated.
Carbon Nanotubes Dispersion Assessment in Nanocomposites by Means of a Pulsed Thermographic Approach
2020
The extensive production of polymer composites reinforced by carbon nanotube is limited by the absence of non-destructive evaluation (NDE) methods capable of assessing product quality to guarantee compliance with specifications. It is well known that the level of dispersion of carbon nanotubes (CNTs) in the polymer matrix is the parameter that, much more than others, can influence their enhancement capabilities. Here an active Infrared Thermography Non Destructive Testing(IR-NDT) inspection, joined with pulsed phase thermography (PPT), were applied for the first time to epoxy-CNT composites to evaluate the level of dispersion of the nanoparticles. The PPT approach was tested on three groups…
Fine Alignment of Thermographic Images for Robotic Inspection of Parts with Complex Geometries
2022
Increasing the efficiency of the quality control phase in industrial production lines through automation is a rapidly growing trend. In non-destructive testing, active thermography techniques are known for their suitability to allow rapid non-contact and full-field inspections. The robotic manipulation of the thermographic instrumentation enables the possibility of performing inspections of large components with complex geometries by collecting multiple thermographic images from optimal positions. The robotisation of the thermographic inspection is highly desirable to improve assessment speed and repeatability without compromising inspection accuracy. Although integrating a robotic setup fo…